9789999323222 - Monitoring the Coagulation/Flocculation Mechanism and Process During Wastewater Treatment: Impedance Spectroscopy de Mortadi, Abdelhadi (16 resultados)

Paperback or Softback. Condición: New. Monitoring the Coagulation/Flocculation Mechanism and Process During Wastewater Treatment. Book.

Paperback. Condición: Brand New. 191 pages. 6.00x0.44x9.00 inches. In Stock.

Condición: New.

Condición: As New. Unread book in perfect condition.

Condición: New.

Condición: As New. Unread book in perfect condition.

PAP. Condición: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

PAP. Condición: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

Condición: New. Print on Demand.

Condición: New. Print on Demand.

Condición: New. PRINT ON DEMAND.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware 192 pp. Englisch.

Paperback. Condición: new. Paperback. The coagulation-flocculation process is an important step and operation, most often used as a pretreatment before separation processes of the liquid and solid phases. The fundamental mechanisms of this process have been the subject of several studies in recent years. However, it is still difficult to predict the required amounts of the coagulants as well as the flocculants to achieve these processes properly. Indeed, these amounts are can be considered as a crucial parameter because any execs can lead to generate a secondary pollution in addition to the cost of these products. In this context, a new approach was carried out to investigate the complex impedance Z*(w) measurements as well as others dielectric/electrical characteristics including the complex permittivity e*(w), complex modulus M*(w) and complex conductivity s*(w) were explored. It is revealed from our study that the analysis of the dielectric and electric properties could be very useful to address these criteria for estimating the optimal amount the coagulants and flocculants. This approach was employed to investigate these properties in the case for effluents from the textile industry. Calcium oxide and aluminum sulfate were used as coagulants, while a cationic polymer was used as a flocculants. For coagulation process: The analysis and modeling of the electrical dielectric properties of the samples exhibited a significant change the evolution of conductivity by decreasing and reaching a minimum value at (3%) of calcium oxide then started to increases. Moreover, the relaxation time and dielectric strength increased in the first phase up to (3%), indicating the formation of more compact aggregations during the coagulation process, and decreased in the second phase above (3%). These results were supported and revealed a good agreement by a complementary analysis of the rheological properties. The evolution of the viscosity exhibited a similar behavior to the evolution of conductivity by decreasing and reaching a minimum value at (3%). This item is printed on demand. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The coagulation-flocculation process is an important step and operation, most often used as a pretreatment before separation processes of the liquid and solid phases. The fundamental mechanisms of this process have been the subject of several studies in recent years. However, it is still difficult to predict the required amounts of the coagulants as well as the flocculants to achieve these processes properly. Indeed, these amounts are can be considered as a crucial parameter because any execs can lead to generate a secondary pollution in addition to the cost of these products. In this context, a new approach was carried out to investigate the complex impedance Z\*(¿) measurements as well as others dielectric/electrical characteristics including the complex permittivity ¿\*(¿), complex modulus M\*(¿) and complex conductivity ¿\*(¿) were explored. It is revealed from our study that the analysis of the dielectric and electric properties could be very useful to address these criteria for estimating the optimal amount the coagulants and flocculants. This approach was employed to investigate these properties in the case for effluents from the textile industry. Calcium oxide and aluminum sulfate were used as coagulants, while a cationic polymer was used as a flocculants. For coagulation process: The analysis and modeling of the electrical dielectric properties of the samples exhibited a significant change the evolution of conductivity by decreasing and reaching a minimum value at (3%) of calcium oxide then started to increases. Moreover, the relaxation time and dielectric strength increased in the first phase up to (3%), indicating the formation of more compact aggregations during the coagulation process, and decreased in the second phase above (3%). These results were supported and revealed a good agreement by a complementary analysis of the rheological properties. The evolution of the viscosity exhibited a similar behavior to the evolution of conductivity by decreasing and reaching a minimum value at (3%).Libri GmbH, Europaallee 1, 36244 Bad Hersfeld 192 pp. Englisch.

Taschenbuch. Condición: Neu. Monitoring the Coagulation/Flocculation Mechanism and Process During Wastewater Treatment | Abdelhadi Mortadi | Taschenbuch | Englisch | 2025 | Eliva Press | EAN 9789999323222 | Verantwortliche Person für die EU: Libri GmbH, Europaallee 1, 36244 Bad Hersfeld, gpsr[at]libri[dot]de | Anbieter: preigu Print on Demand.

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The coagulation-flocculation process is an important step and operation, most often used as a pretreatment before separation processes of the liquid and solid phases. The fundamental mechanisms of this process have been the subject of several studies in recent years. However, it is still difficult to predict the required amounts of the coagulants as well as the flocculants to achieve these processes properly. Indeed, these amounts are can be considered as a crucial parameter because any execs can lead to generate a secondary pollution in addition to the cost of these products. In this context, a new approach was carried out to investigate the complex impedance Z\*(¿) measurements as well as others dielectric/electrical characteristics including the complex permittivity ¿\*(¿), complex modulus M\*(¿) and complex conductivity ¿\*(¿) were explored. It is revealed from our study that the analysis of the dielectric and electric properties could be very useful to address these criteria for estimating the optimal amount the coagulants and flocculants. This approach was employed to investigate these properties in the case for effluents from the textile industry. Calcium oxide and aluminum sulfate were used as coagulants, while a cationic polymer was used as a flocculants. For coagulation process: The analysis and modeling of the electrical dielectric properties of the samples exhibited a significant change the evolution of conductivity by decreasing and reaching a minimum value at (3%) of calcium oxide then started to increases. Moreover, the relaxation time and dielectric strength increased in the first phase up to (3%), indicating the formation of more compact aggregations during the coagulation process, and decreased in the second phase above (3%). These results were supported and revealed a good agreement by a complementary analysis of the rheological properties. The evolution of the viscosity exhibited a similar behavior to the evolution of conductivity by decreasing and reaching a minimum value at (3%).