9789819557073 - nanotechnology in conductive inks: physical performance under dynamic mechanical loading (engineering materials) de salim, mohd azli; photong, chonlatee; ismail, norhisham (10 resultados)
- Tapa dura
Librería: California Books, Miami, FL, Estados Unidos de AmericaCalifornia Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 179,15
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.
- Tapa dura
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 174,36
Envío por EUR 30,50Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book highlights the electrical, mechanical, and material characteristics of graphene nanoplatelet (GNP) and carbon black (CB) nanocomposite conductive inks, developed for wearable electronics. These inks were printed on flexible substrates using four… distinct patterns straight, curved, square, and zigzag and tested under cyclic bending, tensile, and torsional stress to simulate real-world wear and movement. An optimized ink formulation is introduced, reducing nanoparticle content to 20 wt.% GNP and 25 wt.% CB without compromising performance. This improved blend demonstrates enhanced conductivity and mechanical integrity. Among the tested patterns, the curved configuration consistently yielded the lowest resistivity and highest reliability, showcasing superior adaptability under deformation. While GNP-based inks revealed higher hardness and elastic modulus, they also exhibited increased brittleness, with failure occurring before 10,000 loading cycles. The study emphasizes the critical balance between durability and flexibility in the design of nanomaterial-based conductive inks. These findings offer valuable insights for advancing flexible, wearable electronic devices by tailoring material formulations and structural designs to meet specific application demands.
- Tapa dura
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 173,60
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.
- Tapa dura
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 238,37
Envío por EUR 3,44Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New.
Nanotechnology in Conductive Inks: Physical Performance Under Dynamic Mechanical Loading (Engineering Materials)
Salim, Mohd Azli (Author)/ Photong, Chonlatee (Author)/ Ismail, Norhisham (Author)
- Tapa dura
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 234,65
Envío por EUR 14,55Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Hardcover. Condición: Brand New. 281 pages. 6.14x0.69x9.21 inches. In Stock.
- Tapa dura
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 160,49
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Buch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book highlights the electrical, mechanical, and material characteristics of graphene nanoplatelet (GNP) and carbon black (CB) nanocomposite conductive inks, developed for wearable electronics. These inks were printed on flexible subst…rates using four distinct patterns straight, curved, square, and zigzag and tested under cyclic bending, tensile, and torsional stress to simulate real-world wear and movement. An optimized ink formulation is introduced, reducing nanoparticle content to 20 wt.% GNP and 25 wt.% CB without compromising performance. This improved blend demonstrates enhanced conductivity and mechanical integrity. Among the tested patterns, the curved configuration consistently yielded the lowest resistivity and highest reliability, showcasing superior adaptability under deformation. While GNP-based inks revealed higher hardness and elastic modulus, they also exhibited increased brittleness, with failure occurring before 10,000 loading cycles. The study emphasizes the critical balance between durability and flexibility in the design of nanomaterial-based conductive inks. These findings offer valuable insights for advancing flexible, wearable electronic devices by tailoring material formulations and structural designs to meet specific application demands. 264 pp. Englisch.
- Tapa dura
- Impresión bajo demanda
Librería: CitiRetail, Stevenage, Reino UnidoCitiRetail
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 176,79
Envío por EUR 43,06Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. Condición: new. Hardcover. This book highlights the electrical, mechanical, and material characteristics of graphene nanoplatelet (GNP) and carbon black (CB) nanocomposite conductive inks, developed for wearable electronics. These inks were printed on flexible substrates using four distinct patternsstraight, curved, s…quare, and zigzagand tested under cyclic bending, tensile, and torsional stress to simulate real-world wear and movement. An optimized ink formulation is introduced, reducing nanoparticle content to 20 wt.% GNP and 25 wt.% CB without compromising performance. This improved blend demonstrates enhanced conductivity and mechanical integrity. Among the tested patterns, the curved configuration consistently yielded the lowest resistivity and highest reliability, showcasing superior adaptability under deformation. While GNP-based inks revealed higher hardness and elastic modulus, they also exhibited increased brittleness, with failure occurring before 10,000 loading cycles. The study emphasizes the critical balance between durability and flexibility in the design of nanomaterial-based conductive inks. These findings offer valuable insights for advancing flexible, wearable electronic devices by tailoring material formulations and structural designs to meet specific application demands. This item is printed on demand. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.
- Tapa dura
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 160,49
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book highlights the electrical, mechanical, and material characteristics of graphene nanoplatelet (GNP) and carbon black (CB) nanocomposite conductive inks, developed for wearable electronics. These inks were printed on flexible substrate…s using four distinct patternsstraight, curved, square, and zigzagand tested under cyclic bending, tensile, and torsional stress to simulate real-world wear and movement. An optimized ink formulation is introduced, reducing nanoparticle content to 20 wt.% GNP and 25 wt.% CB without compromising performance. This improved blend demonstrates enhanced conductivity and mechanical integrity. Among the tested patterns, the curved configuration consistently yielded the lowest resistivity and highest reliability, showcasing superior adaptability under deformation. While GNP-based inks revealed higher hardness and elastic modulus, they also exhibited increased brittleness, with failure occurring before 10,000 loading cycles. The study emphasizes the critical balance between durability and flexibility in the design of nanomaterial-based conductive inks. These findings offer valuable insights for advancing flexible, wearable electronic devices by tailoring material formulations and structural designs to meet specific application demands.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 284 pp. Englisch.
- Tapa dura
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 246,48
Envío por EUR 7,56Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand.
- Tapa dura
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 251,16
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND.
