ISBN: 9781854862662 - the milling machine: and accessories, choosing and using: 49 (workshop practice series) (23 resultados)

Condición: As New. Unread book in perfect condition.

Condición: very_good. Book has little sign of wear or use.

Condición: New.

Paperback. Condición: New. This book deals with the process of choosing and using a milling machine and its accessories. In addition to the machine itself, the accessories include the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The content is divided into three main sections. Firstly, it describes what machines and accessories are available and covering each one in detail. The author explains which are essential and which can be obtained when the workshop activity eventually demands one. There are also suggestions on how the equipment chosen should be installed. The usage of each machine and accessory is covered for all but their most complex uses. Typically, using the rotary table and the dividing head are both described to a detail sufficient for the majority of uses that will surface in the home workshop. The third section deals with the actual machining process, covering the choice of the cutter for the task in hand, the speeds to use and how the direction of the feed relative to the cutter rotation is vitally important. A less-understood feature of milling, back cutting, is also explained.The subject of sharpening milling tools is briefly covered and a simple off hand grinder fixture that will bring new life to a used end mill is described.…

Paperback. Condición: New. Brand new book, sourced directly from publisher. Dispatch time is 3-4 days from our warehouse. Book will be sent in robust, secure packaging to ensure it reaches you securely.

paperback. Condición: New. Brand new book, sourced directly from publisher. Dispatch time is 6-7 days from our warehouse. Book will be sent in robust, secure packaging to ensure it reaches you securely.

Paperback. Condición: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

Paperback. Condición: new. Paperback. This book deals with the process of choosing and using a milling machine and its accessories. In addition to the machine itself, the accessories include the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The content is divided into three main sections. Firstly, it describes what machines and accessories are available and covering each one in detail. The author explains which are essential and which can be obtained when the workshop activity eventually demands one. There are also suggestions on how the equipment chosen should be installed. The usage of each machine and accessory is covered for all but their most complex uses. Typically, using the rotary table and the dividing head are both described to a detail sufficient for the majority of uses that will surface in the home workshop. The third section deals with the actual machining process, covering the choice of the cutter for the task in hand, the speeds to use and how the direction of the feed relative to the cutter rotation is vitally important. A less-understood feature of milling, back cutting, is also explained.The subject of sharpening milling tools is briefly covered and a simple off hand grinder fixture that will bring new life to a used end mill is described. This book deals with choosing and using a milling machine and its accessories - the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The usage of each machine and accessory is described in sufficient detail for the vast majority of uses in the home workshop. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Condición: good. This book is in good condition, with minimal signs of wear and tear.

PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.

Condición: New. pp. 126.

Paperback. Condición: Brand New. illustrated edition. 123 pages. 8.00x5.50x0.50 inches. In Stock.

Condición: New. 2011. Illustrated. Paperback. This book deals with choosing and using a milling machine and its accessories - the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The usage of each machine and accessory is described in sufficient detail for the vast majority of uses in the home workshop. Series: Workshop Practice. Num Pages: 126 pages, 154 colour photographs; 35 scale plans & line drawings. BIC Classification: WDH. Category: (G) General (US: Trade). Dimension: 209 x 154 x 7. Weight in Grams: 252. . . . . .…

Paperback / softback. Condición: New. New copy - Usually dispatched within 2 working days.

Condición: New. 2011. Illustrated. Paperback. This book deals with choosing and using a milling machine and its accessories - the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The usage of each machine and accessory is described in sufficient detail for the vast majority of uses in the home workshop. Series: Workshop Practice. Num Pages: 126 pages, 154 colour photographs; 35 scale plans & line drawings. BIC Classification: WDH. Category: (G) General (US: Trade). Dimension: 209 x 154 x 7. Weight in Grams: 252. . . . . . Books ship from the US and Ireland.…

Condición: New. pp. 126.

Condición: New.

Condición: As New. Unread book in perfect condition.

Paperback. Condición: new. Paperback. This book deals with the process of choosing and using a milling machine and its accessories. In addition to the machine itself, the accessories include the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The content is divided into three main sections. Firstly, it describes what machines and accessories are available and covering each one in detail. The author explains which are essential and which can be obtained when the workshop activity eventually demands one. There are also suggestions on how the equipment chosen should be installed. The usage of each machine and accessory is covered for all but their most complex uses. Typically, using the rotary table and the dividing head are both described to a detail sufficient for the majority of uses that will surface in the home workshop. The third section deals with the actual machining process, covering the choice of the cutter for the task in hand, the speeds to use and how the direction of the feed relative to the cutter rotation is vitally important. A less-understood feature of milling, back cutting, is also explained.The subject of sharpening milling tools is briefly covered and a simple off hand grinder fixture that will bring new life to a used end mill is described. This book deals with choosing and using a milling machine and its accessories - the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The usage of each machine and accessory is described in sufficient detail for the vast majority of uses in the home workshop. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.…

Taschenbuch. Condición: Neu. Neuware - This book deals with choosing and using a milling machine and its accessories - the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The usage of each machine and accessory is described in sufficient detail for the vast majority of uses in the home workshop.…

Paperback. Condición: new. Paperback. This book deals with the process of choosing and using a milling machine and its accessories. In addition to the machine itself, the accessories include the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The content is divided into three main sections. Firstly, it describes what machines and accessories are available and covering each one in detail. The author explains which are essential and which can be obtained when the workshop activity eventually demands one. There are also suggestions on how the equipment chosen should be installed. The usage of each machine and accessory is covered for all but their most complex uses. Typically, using the rotary table and the dividing head are both described to a detail sufficient for the majority of uses that will surface in the home workshop. The third section deals with the actual machining process, covering the choice of the cutter for the task in hand, the speeds to use and how the direction of the feed relative to the cutter rotation is vitally important. A less-understood feature of milling, back cutting, is also explained.The subject of sharpening milling tools is briefly covered and a simple off hand grinder fixture that will bring new life to a used end mill is described. This book deals with choosing and using a milling machine and its accessories - the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The usage of each machine and accessory is described in sufficient detail for the vast majority of uses in the home workshop. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.…

Condición: New. This book deals with choosing and using a milling machine and its accessories - the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The usage of each machine and accessory is .

Paperback. Condición: New. This book deals with the process of choosing and using a milling machine and its accessories. In addition to the machine itself, the accessories include the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The content is divided into three main sections. Firstly, it describes what machines and accessories are available and covering each one in detail. The author explains which are essential and which can be obtained when the workshop activity eventually demands one. There are also suggestions on how the equipment chosen should be installed. The usage of each machine and accessory is covered for all but their most complex uses. Typically, using the rotary table and the dividing head are both described to a detail sufficient for the majority of uses that will surface in the home workshop. The third section deals with the actual machining process, covering the choice of the cutter for the task in hand, the speeds to use and how the direction of the feed relative to the cutter rotation is vitally important. A less-understood feature of milling, back cutting, is also explained.The subject of sharpening milling tools is briefly covered and a simple off hand grinder fixture that will bring new life to a used end mill is described.…