ISBN: 9781854861498 - spindles: 27 (workshop practice series) (33 resultados)

- Tapa blanda
Compre 3 artículos, obtenga 15 % de descuentode este vendedorLibrería: ThriftBooks-Dallas, Dallas, TX, Estados Unidos de AmericaThriftBooks-Dallas
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 9,54
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponible
Paperback. Condición: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

- Tapa blanda
Compre 3 artículos, obtenga 15 % de descuentode este vendedorLibrería: ThriftBooks-Atlanta, AUSTELL, GA, Estados Unidos de AmericaThriftBooks-Atlanta
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 9,54
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponible
Paperback. Condición: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

- Tapa blanda
Librería: World of Books (was SecondSale), Montgomery, IL, Estados Unidos de AmericaWorld of Books (was SecondSale)
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Aceptable
EUR 9,61
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponible
Paperback. Condición: Good. If you do not own a milling machine (and even if you do) what you can achieve in your workshop is greatly enhanced if you own a spindle or two for use with your lathe. Spindles come in many shapes and sizes, ranging from 19mm (0.75 in) to 57 mm (2.25 in) in diameter, depending on the uses envisaged for them. This book describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear-cutting frame for clockmakers. The emphasis is on spindles that are easy to make and have as few parts as possible; all but one for example use sealed ball bearings (the exception uses tapered collar bearings and thus needs to have seals installed to protect the bearings.) The basic spindle described uses the same spindle nose as the Myford Super 7 lathe; this allows all chucks, plates, collets and closers designed for the lathe to be used with this spindle. It can also be modified for other lathe nose standards. …

- Tapa blanda
Compre 3 artículos, obtenga 5 % de descuentode este vendedorLibrería: WorldofBooks, Goring-By-Sea, WS, Reino UnidoWorldofBooks
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Bueno
EUR 4,22
Envío por EUR 6,68Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 3 disponibles
Paperback. Condición: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

- Tapa blanda
Librería: Better World Books Ltd, Dunfermline, Reino UnidoBetter World Books Ltd
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Aceptable
EUR 7,70
Envío por EUR 5,97Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponible
Condición: Good. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.

- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 13,18
Envío por EUR 2,41Se envía dentro de Estados Unidos de AmericaCantidad disponible: 2 disponibles
Condición: As New. Unread book in perfect condition.

- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 13,42
Envío por EUR 2,41Se envía dentro de Estados Unidos de AmericaCantidad disponible: 2 disponibles
Condición: New.

- Tapa blanda
Librería: Rarewaves.com USA, London, LONDO, Reino UnidoRarewaves.com USA
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 15,91
Gastos de envío gratisSe envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Paperback. Condición: New. If you do not own a milling machine (and even if you do) what you can achieve in your workshop is greatly enhanced if you own a spindle or two for use with your lathe. Spindles come in many shapes and sizes, ranging from 19mm (0.75 in) to 57 mm (2.25 in) in diameter, depending on the uses envisaged for them. This book describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear-cutting frame for clockmakers. The emphasis is on spindles that are easy to make and have as few parts as possible; all but one for example use sealed ball bearings (the exception uses tapered collar bearings and thus needs to have seals installed to protect the bearings.) The basic spindle described uses the same spindle nose as the Myford Super 7 lathe; this allows all chucks, plates, collets and closers designed for the lathe to be used with this spindle. It can also be modified for other lathe nose standards. …

- Tapa blanda
Librería: Chiron Media, Wallingford, Reino UnidoChiron Media
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 11,31
Envío por EUR 5,36Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 10 disponibles
paperback. Condición: New. Brand new book, sourced directly from publisher. Dispatch time is 6-7 days from our warehouse. Book will be sent in robust, secure packaging to ensure it reaches you securely.

- Tapa blanda
Librería: WeBuyBooks, Rossendale, LANCS, Reino UnidoWeBuyBooks
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 4,67
Envío por EUR 11,99Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponible
paperback. Condición: Very Good. Most items will be dispatched the same or the next working day. A copy that has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

- Tapa blanda
Librería: Chiron Media, Wallingford, Reino UnidoChiron Media
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 11,69
Envío por EUR 5,36Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: New. Brand new book, sourced directly from publisher. Dispatch time is 24-48 hours from our warehouse. Book will be sent in robust, secure packaging to ensure it reaches you securely.

Idioma: Inglés
Editorial: Fox Chapel Publishers International, Hemel Hempstead, 1998
- Tapa blanda
Librería: Grand Eagle Retail, Bensenville, IL, Estados Unidos de AmericaGrand Eagle Retail
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 18,86
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponible
Paperback. Condición: new. Paperback. With the model and amateur engineer in mind, this is a guide to making light milling or grinding spindles with a small lathe. Spindles come in many shapes and sizes, depending on their use and included here are descriptions of the design, construction and use of a variety of types (from 19.05 - 57.15mm/0.75 - 2.25 inch) for grinding, milling and drilling. The emphasis is on spindles which are easy to make and have as few parts as possible - all but one use sealed ball bearings. The author is a designer, machinist and woodworker whose interest in clock making led him to design and build the spindles in the book. Also included is a light gear cutting frame for clock makers. Describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear cutting frame for clockmakers. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

- Tapa blanda
Librería: PBShop.store UK, Fairford, GLOS, Reino UnidoPBShop.store UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 14,77
Envío por EUR 3,93Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.

- Tapa blanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 16,54
Envío por EUR 7,76Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 3 disponibles
Condición: New. pp. 160.

- Tapa blanda
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 12,28
Envío por EUR 11,93Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponible
Paperback. Condición: Brand New. 144 pages. 8.03x5.83x0.39 inches. In Stock.

- Tapa blanda
Librería: Kennys Bookshop and Art Galleries Ltd., Galway, GY, IrlandaKennys Bookshop and Art Galleries Ltd.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 16,01
Envío por EUR 9,50Se envía de Irlanda a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. 1998. UK ed. Paperback. Describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear cutting frame for clockmakers. Series: Workshop Practice. Num Pages: 160 pages, 15 black and white photographs; 159 scale plans & line drawings; 10 tables of data. BIC Classification: TGB; WKDW. Category: (G) General (US: Trade); (XV) Technical / Manuals. Dimension: 210 x 148 x 11. Weight in Grams: 236. . . . . . …

- Tapa blanda
Librería: medimops, Berlin, Alemaniamedimops
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Aceptable
EUR 16,07
Envío por EUR 10,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponible
Condición: good. Befriedigend/Good: Durchschnittlich erhaltenes Buch bzw. Schutzumschlag mit Gebrauchsspuren, aber vollständigen Seiten. / Describes the average WORN book or dust jacket that has all the pages present.

- Tapa blanda
Librería: Brook Bookstore On Demand, Napoli, NA, ItaliaBrook Bookstore On Demand
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 16,61
Envío por EUR 11,00Se envía de Italia a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: new.

- Tapa blanda
Librería: Books Puddle, Woodside, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 25,01
Envío por EUR 3,64Se envía dentro de Estados Unidos de AmericaCantidad disponible: 3 disponibles
Condición: New. pp. 160.

- Tapa blanda
Librería: THE SAINT BOOKSTORE, Southport, Reino UnidoTHE SAINT BOOKSTORE
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 12,41
Envío por EUR 15,90Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Paperback / softback. Condición: New. New copy - Usually dispatched within 4 working days.

- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 16,64
Envío por EUR 11,78Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Condición: New. In English.

- Tapa blanda
Librería: Kennys Bookstore, Olney, MD, Estados Unidos de AmericaKennys Bookstore
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 19,89
Envío por EUR 9,57Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. 1998. UK ed. Paperback. Describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear cutting frame for clockmakers. Series: Workshop Practice. Num Pages: 160 pages, 15 black and white photographs; 159 scale plans & line drawings; 10 tables of data. BIC Classification: TGB; WKDW. Category: (G) General (US: Trade); (XV) Technical / Manuals. Dimension: 210 x 148 x 11. Weight in Grams: 236. . . . . . Books ship from the US and Ireland. …

- Tapa blanda
Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 20,01
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 3 disponibles
Condición: New. pp. 160.

- Tapa blanda
Librería: CARDINAL BOOKS ~~ ABAC/ILAB, London -- Birr, ON, CanadaCARDINAL BOOKS ~~ ABAC/ILAB
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Aceptable
EUR 15,06
Envío por EUR 19,10Se envía de Canada a Estados Unidos de AmericaCantidad disponible: 1 disponible
Soft cover. Condición: Good. Softcover. Some creasing to front cover and light soiling to edges. Otherwise clean, tight, and unmarked. Very neat--a sound and handsome copy. Size: 8vo - over 7¾ - 9¾" tall. Book.

- Tapa blanda
Librería: CARDINAL BOOKS ~~ ABAC/ILAB, London -- Birr, ON, CanadaCARDINAL BOOKS ~~ ABAC/ILAB
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Muy bueno
EUR 15,71
Envío por EUR 19,10Se envía de Canada a Estados Unidos de AmericaCantidad disponible: 1 disponible
Soft cover. Condición: Near Fine. Softcover. Light handling wear; otherwise clean, tight, and unmarked. Very neat--a sound and handsome copy. Size: 8vo - over 7¾ - 9¾" tall. Book.

- Tapa blanda
Librería: Island of Books, Birmingham, Reino UnidoIsland of Books
Contactar con el vendedorVendedor de 1 estrellasCondición: Usado - Bueno
EUR 7,68
Envío por EUR 29,95Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponible
Paperback. Condición: Very Good.

Idioma: Inglés
Editorial: Fox Chapel Publishers International Dez 1998, 1998
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 18,46
Envío por EUR 35,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. Neuware - If you do not own a milling machine (and even if you do) what you can achieve in your workshop is greatly enhanced if you own a spindle or two for use with your lathe. Spindles come in many shapes and sizes, ranging from 19mm (0.75 in) to 57 mm (2.25 in) in diameter, depending on the uses envisaged for them. This book describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear-cutting frame for clockmakers. The emphasis is on spindles that are easy to make and have as few parts as possible; all but one for example use sealed ball bearings (the exception uses tapered collar bearings and thus needs to have seals installed to protect the bearings.) The basic spindle described uses the same spindle nose as the Myford Super 7 lathe; this allows all chucks, plates, collets and closers designed for the lathe to be used with this spindle. It can also be modified for other lathe nose standards.…

Idioma: Inglés
Editorial: Fox Chapel Publishers International, Hemel Hempstead, 1998
- Tapa blanda
Librería: AussieBookSeller, Truganina, VIC, AustraliaAussieBookSeller
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 25,39
Envío por EUR 33,74Se envía de Australia a Estados Unidos de AmericaCantidad disponible: 1 disponible
Paperback. Condición: new. Paperback. With the model and amateur engineer in mind, this is a guide to making light milling or grinding spindles with a small lathe. Spindles come in many shapes and sizes, depending on their use and included here are descriptions of the design, construction and use of a variety of types (from 19.05 - 57.15mm/0.75 - 2.25 inch) for grinding, milling and drilling. The emphasis is on spindles which are easy to make and have as few parts as possible - all but one use sealed ball bearings. The author is a designer, machinist and woodworker whose interest in clock making led him to design and build the spindles in the book. Also included is a light gear cutting frame for clock makers. Describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear cutting frame for clockmakers. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.…

Idioma: Inglés
Editorial: Fox Chapel Publishers International, Hemel Hempstead, 1998
- Tapa blanda
Librería: CitiRetail, Stevenage, Reino UnidoCitiRetail
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 16,57
Envío por EUR 44,15Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponible
Paperback. Condición: new. Paperback. With the model and amateur engineer in mind, this is a guide to making light milling or grinding spindles with a small lathe. Spindles come in many shapes and sizes, depending on their use and included here are descriptions of the design, construction and use of a variety of types (from 19.05 - 57.15mm/0.75 - 2.25 inch) for grinding, milling and drilling. The emphasis is on spindles which are easy to make and have as few parts as possible - all but one use sealed ball bearings. The author is a designer, machinist and woodworker whose interest in clock making led him to design and build the spindles in the book. Also included is a light gear cutting frame for clock makers. Describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear cutting frame for clockmakers. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.…

- Tapa blanda
Librería: Speedyhen, Hertfordshire, Reino UnidoSpeedyhen
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 12,41
Envío por EUR 48,92Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Condición: NEW.