Tomasz a kowalewski (36 resultados)

Hardcover. Condición: Very Good. Mechanics of the 21st Century: Proceedings of the 21st International Congress of Theoretical and Applied Mechanics, Warsaw, Poland, 15-21 August 2004 This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping.…

Hardcover. Condición: Very Good. Shipped within 24 hours from our UK warehouse. Clean, undamaged book with no damage to pages and minimal wear to the cover. Spine still tight, in very good condition. Remember if you are not happy, you are covered by our 100% money back guarantee.

Condición: New.

Condición: Brand New. New. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service.

Condición: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Solid-liquid phase change phenomena are present in a large number of industrial applications and natural processes like material processing, crystal growth, heat storage, icebergs or magma eruption. Numerical modelling of strongly non-linear, moving boundary, thermal and fluid flow problems is a challenging task. The book gives a review of modelling methods of phase change problems, numerical and experimental methods used in the field. It combines experience of theoreticians with those using numerical tools for modelling problems of solidification. It offers researchers and engineers knowledge and critical assessment of numerical approaches, physical models and validation methods used in the field of modelling industrial problems. The book collects in an unique way most recent knowledge on modelling of phase change problems, from micro scale problems and the interface (growth of dendrites) to macro scale models.…

Condición: New. pp. 284.

Taschenbuch. Condición: Neu. Phase Change with Convection: Modelling and Validation | Tomasz A. Kowalewski (u. a.) | Taschenbuch | CISM International Centre for Mechanical Sciences | vii | Englisch | 2004 | Springer | EAN 9783211208915 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

hardcover. Condición: New. In shrink wrap. Looks like an interesting title.

Condición: Used. pp. 496.

Condición: Used. pp. 496.

Condición: Used. pp. 496.

Condición: New.

Condición: New.

Paperback. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: As New. Unread book in perfect condition.

Condición: As New. Unread book in perfect condition.

Taschenbuch. Condición: Neu. Mechanics of the 21st Century | Proceedings of the 21st International Congress of Theoretical and Applied Mechanics, Warsaw, Poland, 15-21 August 2004 | Witold Gutkowski (u. a.) | Taschenbuch | lxxiv | Englisch | 2014 | Springer | EAN 9789400789074 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - st The21 InternationalCongressofTheoreticalandAppliedMechanics (ICTAM04) took place August 15 21, 2004, in Warsaw, Poland. It was organized by Polish National Committee of IUTAM, Institute of Fundamental Technological Research of the Polish Academy of Sciences (IPPTPAN)andWarsawUniversityofTechnology. TheCongressvenue was the main building of Warsaw University of Technology. The idea of congresses devoted to mechanics, can be traced back to a conference on problems of uid mechanics in Innsbruck, 1922. It was organized by four individuals, whose names, are and will, remain very wellknowntonextgenerationsofscientists,C.W.Oseen,T.Levi-Civite, T.vonKarm an,andL.Prandtl. Thisconferencewassofruitful,thatthe organizers decided to arrange similar meetings in the future, every four years, and to extend the scope of the future meetings to include solid mechanics. Hence a series of meetings started eighty years agowiththe st 1 ICTAM held in Delft, Netherlands. From the meetingsoftheCongress Committee sprang the idea of a more permanent organization to look out for the world interests in the mechanical sciences. Thus, IUTAM, theInternational Unionof Theor- ical and Applied Mechanics, was formed on September 26, 1946. In 1947 IUTAM became a member of ICSU, the International Council of Sci- ti c Unions, itself founded in 1931. The highest authority of IUTAMis the General Assembly, with delegates from the Adhering Organizations, each of which is a liated with a national learned society in a given country. Scienti cProgram Contemporary mechanics poses both, the fundamental problems from the area of pure science, and its strong links with modern technology.…

Kombiprodukt. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - st The21 InternationalCongressofTheoreticalandAppliedMechanics (ICTAM04) took place August 15 21, 2004, in Warsaw, Poland. It was organized by Polish National Committee of IUTAM, Institute of Fundamental Technological Research of the Polish Academy of Sciences (IPPTPAN)andWarsawUniversityofTechnology. TheCongressvenue was the main building of Warsaw University of Technology. The idea of congresses devoted to mechanics, can be traced back to a conference on problems of uid mechanics in Innsbruck, 1922. It was organized by four individuals, whose names, are and will, remain very wellknowntonextgenerationsofscientists,C.W.Oseen,T.Levi-Civite, T.vonKarm an,andL.Prandtl. Thisconferencewassofruitful,thatthe organizers decided to arrange similar meetings in the future, every four years, and to extend the scope of the future meetings to include solid mechanics. Hence a series of meetings started eighty years agowiththe st 1 ICTAM held in Delft, Netherlands. From the meetingsoftheCongress Committee sprang the idea of a more permanent organization to look out for the world interests in the mechanical sciences. Thus, IUTAM, theInternational Unionof Theor- ical and Applied Mechanics, was formed on September 26, 1946. In 1947 IUTAM became a member of ICSU, the International Council of Sci- ti c Unions, itself founded in 1931. The highest authority of IUTAMis the General Assembly, with delegates from the Adhering Organizations, each of which is a liated with a national learned society in a given country. Scienti cProgram Contemporary mechanics poses both, the fundamental problems from the area of pure science, and its strong links with modern technology.…

Hardcover. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: As New. Unread book in perfect condition.

Hardcover. Condición: Brand New. 1st edition. 422 pages. 9.25x6.25x1.00 inches. In Stock.

Softcover. Condición: gut. 2014. Mechanics of the 21st Century In deutscher Sprache. pages.

Condición: gut. Phase Change with Convection: Modelling and Validation In deutscher Sprache. pages.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This unique volume offers a review of state-of-the-art modelling methods of phase change problems, numerical and experimental methods used in the field. It combines the experience of theoreticians with those using numerical tools for modelling problems of solidification. 284 pp. Englisch.…

Kartoniert / Broschiert. Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. This unique volume offers a review of state-of-the-art modelling methods of phase change problems, numerical and experimental methods used in the field. It combines the experience of theoreticians with those using numerical tools for modelling problems o.…

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Solid-liquid phase change phenomena are present in a large number of industrial applications and natural processes like material processing, crystal growth, heat storage, icebergs or magma eruption. Numerical modelling of strongly non-linear, moving boundary, thermal and fluid flow problems is a challenging task. The book gives a review of modelling methods of phase change problems, numerical and experimental methods used in the field. It combines experience of theoreticians with those using numerical tools for modelling problems of solidification. It offers researchers and engineers knowledge and critical assessment of numerical approaches, physical models and validation methods used in the field of modelling industrial problems. The book collects in an unique way most recent knowledge on modelling of phase change problems, from micro scale problems and the interface (growth of dendrites) to macro scale models.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 284 pp. Englisch. …

Condición: New. Print on Demand pp. 284.

Condición: new. Questo è un articolo print on demand.