terry a aspin (28 resultados)

Paperback. Condición: Very Good. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have been many revisions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

paperback. Condición: New. We have 75,000 books to choose from -- Ship within 24 hours -- Satisfaction Guaranteed!

Condición: Good. Most items will be dispatched the same or the next working day. A copy that has been read but remains in clean condition. All of the pages are intact and the cover is intact and the spine may show signs of wear. The book may have minor markings which are not specifically mentioned.

Paperback. Condición: New. At one time, most towns of any size had somewhere a small foundry that would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Regrettably, those days are no more and the model engineer in many areas must either adapt commercially available castings or send away to a specialist foundry that will undertake small jobs, often at some expense and with some delay. The alternative is to make your own patterns and castings, which is in fact much easier than you may think. The Backyard Foundry covers basic principles, materials and techniques, pattern making, moulding boxes, cores and core-boxes, electric, gas and coke furnaces, and includes step-by-step procedures with examples of locomotive cylinders and wheels. Sources of specialised materials and even the design of an outdoor furnace suitable for small-scale commercial work are given. Each stage and subject is covered in detail so that even the inexperienced can undertake casting with confidence. Although the book is written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages.

PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.

Paperback. Condición: New. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have been many revisions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive.

Paperback. Condición: New. At one time, most towns of any size had somewhere a small foundry that would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Regrettably, those days are no more and the model engineer in many areas must either adapt commercially available castings or send away to a specialist foundry that will undertake small jobs, often at some expense and with some delay. The alternative is to make your own patterns and castings, which is in fact much easier than you may think. The Backyard Foundry covers basic principles, materials and techniques, pattern making, moulding boxes, cores and core-boxes, electric, gas and coke furnaces, and includes step-by-step procedures with examples of locomotive cylinders and wheels. Sources of specialised materials and even the design of an outdoor furnace suitable for small-scale commercial work are given. Each stage and subject is covered in detail so that even the inexperienced can undertake casting with confidence. Although the book is written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages.

PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.

Paperback. Condición: new. Paperback. At one time most towns of any size had somewhere a small foundry which would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Those days are no more and model engineers in many areas must either adapt commerically available castings or send away to a specialist foundry which will undertake small work, often at some expense and with some delay. The alternative is to set up a home foundry and to make one's own patterns and castings. This text covers all the basic principles of foundry work, describes materials and techniques, pattern-making, moulding boxes, cores and core-boxes, metals, all types of furnaces, and includes step-by-step procedures with examples of cylinders and wheels. This book covers basic principles of foundrywork - materials and techniques, pattern-making, moulding boxes, cores and core boxes, metals, electric, gas, coke furnaces and step-by-step procedures. Although written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have been many revisions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive. This book is regarded as the perfect introduction to casting work in common metals. This new edition brings everything right up to date additional copy with new photographs and redrawn illustrations of the latest amateur foundry technology. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.

PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.

Condición: New. In.

paperback. Condición: New.

paperback. Condición: New.

paperback. Condición: New.

Condición: Good. Like New except book is missing its Dust Cover.

Paperback. Condición: new. Paperback. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have been many revisions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive. This book is regarded as the perfect introduction to casting work in common metals. This new edition brings everything right up to date additional copy with new photographs and redrawn illustrations of the latest amateur foundry technology. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Paperback. Condición: new. Paperback. At one time most towns of any size had somewhere a small foundry which would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Those days are no more and model engineers in many areas must either adapt commerically available castings or send away to a specialist foundry which will undertake small work, often at some expense and with some delay. The alternative is to set up a home foundry and to make one's own patterns and castings. This text covers all the basic principles of foundry work, describes materials and techniques, pattern-making, moulding boxes, cores and core-boxes, metals, all types of furnaces, and includes step-by-step procedures with examples of cylinders and wheels. This book covers basic principles of foundrywork - materials and techniques, pattern-making, moulding boxes, cores and core boxes, metals, electric, gas, coke furnaces and step-by-step procedures. Although written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Paperback. Condición: new. Paperback. At one time most towns of any size had somewhere a small foundry which would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Those days are no more and model engineers in many areas must either adapt commerically available castings or send away to a specialist foundry which will undertake small work, often at some expense and with some delay. The alternative is to set up a home foundry and to make one's own patterns and castings. This text covers all the basic principles of foundry work, describes materials and techniques, pattern-making, moulding boxes, cores and core-boxes, metals, all types of furnaces, and includes step-by-step procedures with examples of cylinders and wheels. This book covers basic principles of foundrywork - materials and techniques, pattern-making, moulding boxes, cores and core boxes, metals, electric, gas, coke furnaces and step-by-step procedures. Although written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.

Paperback. Condición: New. At one time, most towns of any size had somewhere a small foundry that would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Regrettably, those days are no more and the model engineer in many areas must either adapt commercially available castings or send away to a specialist foundry that will undertake small jobs, often at some expense and with some delay. The alternative is to make your own patterns and castings, which is in fact much easier than you may think. The Backyard Foundry covers basic principles, materials and techniques, pattern making, moulding boxes, cores and core-boxes, electric, gas and coke furnaces, and includes step-by-step procedures with examples of locomotive cylinders and wheels. Sources of specialised materials and even the design of an outdoor furnace suitable for small-scale commercial work are given. Each stage and subject is covered in detail so that even the inexperienced can undertake casting with confidence. Although the book is written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages.

Paperback. Condición: new. Paperback. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have been many revisions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive. This book is regarded as the perfect introduction to casting work in common metals. This new edition brings everything right up to date additional copy with new photographs and redrawn illustrations of the latest amateur foundry technology. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.

Taschenbuch. Condición: Neu. Neuware - At one time, most towns of any size had somewhere a small foundry that would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Regrettably, those days are no more and the model engineer in many areas must either adapt commercially available castings or send away to a specialist foundry that will undertake small jobs, often at some expense and with some delay. The alternative is to make your own patterns and castings, which is in fact much easier than you may think.

Taschenbuch. Condición: Neu. Neuware - This book is regarded as the perfect introduction to casting work in common metals. This new edition brings everything right up to date additional copy with new photographs and redrawn illustrations of the latest amateur foundry technology.

Paperback. Condición: New. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have been many revisions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive.

Taschenbuch. Condición: Neu. Foundrywork for the Amateur | Terry A. Aspin | Taschenbuch | Workshop Practice Series | Kartoniert / Broschiert | Englisch | 1998 | Fox Chapel Publishers International | EAN 9781854861689 | Verantwortliche Person für die EU: Libri GmbH, Europaallee 1, 36244 Bad Hersfeld, gpsr[at]libri[dot]de | Anbieter: preigu.

Paperback. Condición: New. At one time, most towns of any size had somewhere a small foundry that would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Regrettably, those days are no more and the model engineer in many areas must either adapt commercially available castings or send away to a specialist foundry that will undertake small jobs, often at some expense and with some delay. The alternative is to make your own patterns and castings, which is in fact much easier than you may think. The Backyard Foundry covers basic principles, materials and techniques, pattern making, moulding boxes, cores and core-boxes, electric, gas and coke furnaces, and includes step-by-step procedures with examples of locomotive cylinders and wheels. Sources of specialised materials and even the design of an outdoor furnace suitable for small-scale commercial work are given. Each stage and subject is covered in detail so that even the inexperienced can undertake casting with confidence. Although the book is written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages.

Taschenbuch. Condición: Neu. The Backyard Foundry | Terry A. Aspin | Taschenbuch | Workshop Practice Series | Kartoniert / Broschiert | Englisch | 1998 | Fox Chapel Publishers International | EAN 9781854861467 | Verantwortliche Person für die EU: Libri GmbH, Europaallee 1, 36244 Bad Hersfeld, gpsr[at]libri[dot]de | Anbieter: preigu.