Aspin terry a (28 resultados)
Idioma: Inglés
Editorial: Fox Chapel Publishers International, United Kingdom, 1998
- Tapa blanda
Librería: WorldofBooks, Goring-By-Sea, WS, Reino UnidoWorldofBooks
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 3,51
Envío por EUR 6,57Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: Very Good. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have been m…any revisions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
- Tapa blanda
Librería: Bank of Books, Ventura, CA, Estados Unidos de AmericaBank of Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 7,64
Envío por EUR 3,73Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
paperback. Condición: New. We have 75,000 books to choose from -- Ship within 24 hours -- Satisfaction Guaranteed.
- Tapa blanda
Librería: WeBuyBooks, Rossendale, LANCS, Reino UnidoWeBuyBooks
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Aceptable
EUR 5,65
Envío por EUR 5,75Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: Good. Most items will be dispatched the same or the next working day. A copy that has been read but remains in clean condition. All of the pages are intact and the cover is intact and the spine may show signs of wear. The book may have minor markings which are not specifically mentioned.
- Tapa blanda
Librería: Rarewaves.com USA, London, LONDO, Reino UnidoRarewaves.com USA
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 14,38
Gastos de envío gratisSe envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: New. At one time, most towns of any size had somewhere a small foundry that would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Regrettably, those days are no more and the model engineer in many areas must either adapt commercially available cast…ings or send away to a specialist foundry that will undertake small jobs, often at some expense and with some delay. The alternative is to make your own patterns and castings, which is in fact much easier than you may think. The Backyard Foundry covers basic principles, materials and techniques, pattern making, moulding boxes, cores and core-boxes, electric, gas and coke furnaces, and includes step-by-step procedures with examples of locomotive cylinders and wheels. Sources of specialised materials and even the design of an outdoor furnace suitable for small-scale commercial work are given. Each stage and subject is covered in detail so that even the inexperienced can undertake casting with confidence. Although the book is written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages.
- Tapa blanda
Librería: PBShop.store US, Wood Dale, IL, Estados Unidos de AmericaPBShop.store US
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 15,05
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 3 disponibles
PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.
- Tapa blanda
Librería: Rarewaves.com USA, London, LONDO, Reino UnidoRarewaves.com USA
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 15,30
Gastos de envío gratisSe envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Paperback. Condición: New. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have been many re…visions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive.
- Tapa blanda
Librería: Rarewaves USA, OSWEGO, IL, Estados Unidos de AmericaRarewaves USA
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 16,39
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: New. At one time, most towns of any size had somewhere a small foundry that would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Regrettably, those days are no more and the model engineer in many areas must either adapt commercially available cast…ings or send away to a specialist foundry that will undertake small jobs, often at some expense and with some delay. The alternative is to make your own patterns and castings, which is in fact much easier than you may think. The Backyard Foundry covers basic principles, materials and techniques, pattern making, moulding boxes, cores and core-boxes, electric, gas and coke furnaces, and includes step-by-step procedures with examples of locomotive cylinders and wheels. Sources of specialised materials and even the design of an outdoor furnace suitable for small-scale commercial work are given. Each stage and subject is covered in detail so that even the inexperienced can undertake casting with confidence. Although the book is written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages.
- Tapa blanda
Librería: PBShop.store US, Wood Dale, IL, Estados Unidos de AmericaPBShop.store US
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 16,49
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 15 disponibles
PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.
Idioma: Inglés
Editorial: Fox Chapel Publishers International, Hemel Hempstead, 1998
- Tapa blanda
Librería: Grand Eagle Retail, Bensenville, IL, Estados Unidos de AmericaGrand Eagle Retail
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 17,56
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: new. Paperback. At one time most towns of any size had somewhere a small foundry which would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Those days are no more and model engineers in many areas must either adapt commerically available castings…or send away to a specialist foundry which will undertake small work, often at some expense and with some delay. The alternative is to set up a home foundry and to make one's own patterns and castings. This text covers all the basic principles of foundry work, describes materials and techniques, pattern-making, moulding boxes, cores and core-boxes, metals, all types of furnaces, and includes step-by-step procedures with examples of cylinders and wheels. This book covers basic principles of foundrywork - materials and techniques, pattern-making, moulding boxes, cores and core boxes, metals, electric, gas, coke furnaces and step-by-step procedures. Although written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Idioma: Inglés
Editorial: Fox Chapel Publishers International, Hemel Hempstead, 1998
- Tapa blanda
Librería: Grand Eagle Retail, Bensenville, IL, Estados Unidos de AmericaGrand Eagle Retail
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 17,75
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: new. Paperback. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have b…een many revisions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive. This book is regarded as the perfect introduction to casting work in common metals. This new edition brings everything right up to date additional copy with new photographs and redrawn illustrations of the latest amateur foundry technology. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
- Tapa blanda
Librería: PBShop.store UK, Fairford, GLOS, Reino UnidoPBShop.store UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 14,66
Envío por EUR 3,86Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.
- Tapa blanda
Librería: PBShop.store UK, Fairford, GLOS, Reino UnidoPBShop.store UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 14,66
Envío por EUR 3,86Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 3 disponibles
PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 14,78
Envío por EUR 14,06Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New. In.
- Tapa blanda
Librería: Chiron Media, Wallingford, Reino UnidoChiron Media
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 11,06
Envío por EUR 18,18Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 10 disponibles
paperback. Condición: New.
- Tapa blanda
Librería: Chiron Media, Wallingford, Reino UnidoChiron Media
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 11,41
Envío por EUR 18,18Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
paperback. Condición: New.
- Tapa blanda
Librería: Chiron Media, Wallingford, Reino UnidoChiron Media
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 11,43
Envío por EUR 18,18Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 6 disponibles
paperback. Condición: New.
- Tapa blanda
Librería: Hay-on-Wye Booksellers, Hay-on-Wye, HEREF, Reino UnidoHay-on-Wye Booksellers
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Aceptable
EUR 5,14
Envío por EUR 29,34Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: Good. Like New except book is missing its Dust Cover.
Idioma: Inglés
Editorial: Fox Chapel Publishers International, Hemel Hempstead, 1998
- Tapa blanda
Librería: AussieBookSeller, Truganina, VIC, AustraliaAussieBookSeller
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 24,26
Envío por EUR 32,44Se envía de Australia a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: new. Paperback. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have b…een many revisions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive. This book is regarded as the perfect introduction to casting work in common metals. This new edition brings everything right up to date additional copy with new photographs and redrawn illustrations of the latest amateur foundry technology. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.
Idioma: Inglés
Editorial: Fox Chapel Publishers International, Hemel Hempstead, 1998
- Tapa blanda
Librería: AussieBookSeller, Truganina, VIC, AustraliaAussieBookSeller
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 24,26
Envío por EUR 32,44Se envía de Australia a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: new. Paperback. At one time most towns of any size had somewhere a small foundry which would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Those days are no more and model engineers in many areas must either adapt commerically available castings…or send away to a specialist foundry which will undertake small work, often at some expense and with some delay. The alternative is to set up a home foundry and to make one's own patterns and castings. This text covers all the basic principles of foundry work, describes materials and techniques, pattern-making, moulding boxes, cores and core-boxes, metals, all types of furnaces, and includes step-by-step procedures with examples of cylinders and wheels. This book covers basic principles of foundrywork - materials and techniques, pattern-making, moulding boxes, cores and core boxes, metals, electric, gas, coke furnaces and step-by-step procedures. Although written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.
Idioma: Inglés
Editorial: Fox Chapel Publishers International, Hemel Hempstead, 1998
- Tapa blanda
Librería: CitiRetail, Stevenage, Reino UnidoCitiRetail
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 16,30
Envío por EUR 43,43Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: new. Paperback. At one time most towns of any size had somewhere a small foundry which would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Those days are no more and model engineers in many areas must either adapt commerically available castings…or send away to a specialist foundry which will undertake small work, often at some expense and with some delay. The alternative is to set up a home foundry and to make one's own patterns and castings. This text covers all the basic principles of foundry work, describes materials and techniques, pattern-making, moulding boxes, cores and core-boxes, metals, all types of furnaces, and includes step-by-step procedures with examples of cylinders and wheels. This book covers basic principles of foundrywork - materials and techniques, pattern-making, moulding boxes, cores and core boxes, metals, electric, gas, coke furnaces and step-by-step procedures. Although written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.
- Tapa blanda
Librería: Rarewaves USA United, OSWEGO, IL, Estados Unidos de AmericaRarewaves USA United
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 17,98
Envío por EUR 43,84Se envía dentro de Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: New. At one time, most towns of any size had somewhere a small foundry that would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Regrettably, those days are no more and the model engineer in many areas must either adapt commercially available cast…ings or send away to a specialist foundry that will undertake small jobs, often at some expense and with some delay. The alternative is to make your own patterns and castings, which is in fact much easier than you may think. The Backyard Foundry covers basic principles, materials and techniques, pattern making, moulding boxes, cores and core-boxes, electric, gas and coke furnaces, and includes step-by-step procedures with examples of locomotive cylinders and wheels. Sources of specialised materials and even the design of an outdoor furnace suitable for small-scale commercial work are given. Each stage and subject is covered in detail so that even the inexperienced can undertake casting with confidence. Although the book is written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages.
Idioma: Inglés
Editorial: Fox Chapel Publishers International, Hemel Hempstead, 1998
- Tapa blanda
Librería: CitiRetail, Stevenage, Reino UnidoCitiRetail
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 19,33
Envío por EUR 43,43Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: new. Paperback. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have b…een many revisions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive. This book is regarded as the perfect introduction to casting work in common metals. This new edition brings everything right up to date additional copy with new photographs and redrawn illustrations of the latest amateur foundry technology. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.
Idioma: Inglés
Editorial: Fox Chapel Publishers International Dez 1998, 1998
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 15,30
Envío por EUR 60,74Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Neuware - At one time, most towns of any size had somewhere a small foundry that would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Regrettably, those days are no more and the model engineer in many areas must either adapt commercially av…ailable castings or send away to a specialist foundry that will undertake small jobs, often at some expense and with some delay. The alternative is to make your own patterns and castings, which is in fact much easier than you may think.
Idioma: Inglés
Editorial: Fox Chapel Publishers International Dez 1998, 1998
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 15,30
Envío por EUR 60,77Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Neuware - This book is regarded as the perfect introduction to casting work in common metals. This new edition brings everything right up to date additional copy with new photographs and redrawn illustrations of the latest amateur foundry technology.
- Tapa blanda
Librería: Rarewaves.com UK, London, Reino UnidoRarewaves.com UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 13,09
Envío por EUR 76,30Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Paperback. Condición: New. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have been many re…visions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive.
- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 18,05
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Foundrywork for the Amateur | Terry A. Aspin | Taschenbuch | Workshop Practice Series | Kartoniert / Broschiert | Englisch | 1998 | Fox Chapel Publishers International | EAN 9781854861689 | Verantwortliche Person für die EU: Libri GmbH, Europaallee 1, 36244 Bad Hersfeld, gpsr[at]libri[dot]de | Anbiet…er: preigu.
- Tapa blanda
Librería: Rarewaves.com UK, London, Reino UnidoRarewaves.com UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 12,01
Envío por EUR 76,30Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: New. At one time, most towns of any size had somewhere a small foundry that would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Regrettably, those days are no more and the model engineer in many areas must either adapt commercially available cast…ings or send away to a specialist foundry that will undertake small jobs, often at some expense and with some delay. The alternative is to make your own patterns and castings, which is in fact much easier than you may think. The Backyard Foundry covers basic principles, materials and techniques, pattern making, moulding boxes, cores and core-boxes, electric, gas and coke furnaces, and includes step-by-step procedures with examples of locomotive cylinders and wheels. Sources of specialised materials and even the design of an outdoor furnace suitable for small-scale commercial work are given. Each stage and subject is covered in detail so that even the inexperienced can undertake casting with confidence. Although the book is written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages.
- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 18,05
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. The Backyard Foundry | Terry A. Aspin | Taschenbuch | Workshop Practice Series | Kartoniert / Broschiert | Englisch | 1998 | Fox Chapel Publishers International | EAN 9781854861467 | Verantwortliche Person für die EU: Libri GmbH, Europaallee 1, 36244 Bad Hersfeld, gpsr[at]libri[dot]de | Anbieter: pre…igu.
