Paul g andersen (32 resultados)
- Más imágenes
Connecticut and American Impressionism
Rovetti, Paul (preface), Harold Spencer, Susan G. Larkin, and Jeffrey W. Andersen
Idioma: Inglés
Editorial: The William Benton Museum of Art, The University of Connecticut, Storrs, CT, 1980
- Tapa blanda
- Primera edición
Librería: Newbury Books, Atlanta, GA, Estados Unidos de AmericaNewbury Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Excelente
EUR 18,11
Envío por EUR 5,71Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Soft cover. Condición: Fine. 1st. The catalogue of three concurrent exhibitions: the William Benton Museum of Art, the University of Connecticut, Storrs, The Artists and The Landscape, March 17 - May 30, 1980, the Hurlbutt Gallery, Greenwich Library, Greenwich, The Cos Cob Clapboard School, March 20 - May 31, 1980, and the Lyme…Historical Society, Old Lyme, The Art Colony at Old Lyme, March 21 - June 21, 1980. 209 works are described and illustrated, 23 in color. Numerous black and white figures and photographs accompany the text. The final section is Biographies of the Artists. 184pp 1.46lb 10.0x8.5x0.5in.
Bortezomib in the Treatment of Multiple Myeloma.
Ghobrial, Irene M.; Paul G. Richardson; Kenneth C. Andersen (Eds.)
Idioma: Inglés
Editorial: Basel, Springer., 2011
- Tapa dura
Librería: Universitätsbuchhandlung Herta Hold GmbH, Berlin, AlemaniaUniversitätsbuchhandlung Herta Hold GmbH
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado
EUR 15,00
Envío por EUR 30,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
VIII, 179 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Stamped. Milestones in Drug Therapy. Sprache: Englisch.
- Más imágenes
Affischen som vapen i krig och fred. Paul Lipschutz samling. Armémuseum, Stockholm, februari-augusti 1986.
(Affischer / Posters) - Jan von Konow & Jan Myrdal & Lena Johannesson & Ulf G. Hjorth-Andersén & Paul Lipschutz
Editorial: [ENGLISH: - - - "The Poster as a Weapon in War and Peace", catalogue in Swedish for an exhibition of the Paul Lipschutz collection of posters, with essays and full-page reproductions in colour, and a loosely inserted printed list of exhibited posters (75 entries).]
Librería: Hatt Rare Books ILAB & CINOA, Hägersten, SueciaHatt Rare Books ILAB & CINOA
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado
EUR 11,18
Envío por EUR 20,00Se envía de Suecia a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Añadir al carritoKlammerhft., dek. omslag. Fint skick. Stockholm 1986. 8:o. 80 sid. Illustrerad med talrika helsidesbilder i färg. Löst bifogad tryckt affischförteckning om 75 nummer. Innehåll: "Skönheten som politik", "Affischen - bildkonstens romarcitat", "Affischerna berättar", "Bilder". - - - "The Poster as a Weapon in War and Peace", catalo…gue in Swedish for an exhibition of the Paul Lipschutz collection of posters, with essays and full-page reproductions in colour, and a loosely inserted printed list of exhibited posters (75 entries).
Connecticut and American Impressionism: A Cooperative Exhibition Project Concurrently in Three Locations
Paul F. Rovetti [Preface]; Harold Spencer [Contributor]; Susan G. Larkin [Contributor]; Jeffrey W. Andersen [Contributor];
- Tapa blanda
Librería: BennettBooksLtd, Los Angeles, CA, Estados Unidos de AmericaBennettBooksLtd
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 71,98
Envío por EUR 6,11Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
paperback. Condición: New. In shrink wrap. Looks like an interesting title.
Editorial: Sweden 1986, 1986
- Firmado
Librería: ART CONSULTING:SCANDINAVIA, Books on Art, Calabasas, CA, Estados Unidos de AmericaART CONSULTING:SCANDINAVIA, Books on Art
Contactar con el vendedorVendedor de 2 estrellasCondición: Usado
EUR 35,77
Envío por EUR 5,71Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Añadir al carritoPosters from the Paul Lipschutz Collection in the following subjects: War, Defense and Peace from 1897 to 1972; signed and not., Swedish, Year1986, Illust. B/W, Illust. Color48, ISBN 9186478044, Code 0717. Softbound, In Pristine Condition, Location of Exhibition: Arm?museum, Stockholm, Sweden (The Military Museum, Stockholm), Bi…bl. Cat. of exh. Pages 80, Size 9 1/2öx6 1/2ö.
- Tapa dura
Librería: PBShop.store UK, Fairford, GLOS, Reino UnidoPBShop.store UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 89,20
Envío por EUR 6,87Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
HRD. Condición: New. New Book. Shipped from UK. Established seller since 2000.
- Tapa dura
Librería: World of Books (was SecondSale), Montgomery, IL, Estados Unidos de AmericaWorld of Books (was SecondSale)
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 98,95
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: Very Good. Item in very good condition! Textbooks may not include supplemental items i.e. CDs, access codes etc.
- Tapa dura
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 96,59
Envío por EUR 2,32Se envía dentro de Estados Unidos de AmericaCantidad disponible: 2 disponibles
Condición: New.
- Tapa dura
Librería: PAPER CAVALIER UK, London, Reino UnidoPAPER CAVALIER UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 98,54
Envío por EUR 7,03Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: as new. Appears unread. May have a retail sticker on back cover or remainder mark on the text block.
- Tapa dura
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 89,19
Envío por EUR 17,57Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New.
- Tapa dura
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 106,33
Envío por EUR 2,32Se envía dentro de Estados Unidos de AmericaCantidad disponible: 2 disponibles
Condición: As New. Unread book in perfect condition.
- Tapa dura
Librería: Brook Bookstore On Demand, Napoli, NA, ItaliaBrook Bookstore On Demand
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 102,39
Envío por EUR 6,80Se envía de Italia a Estados Unidos de AmericaCantidad disponible: 3 disponibles
Condición: new.
- Tapa dura
Librería: Grand Eagle Retail, Bensenville, IL, Estados Unidos de AmericaGrand Eagle Retail
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 116,96
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. Condición: new. Hardcover. Single-screw or twin-screw extruder? When the need to produce a homogeneous polymer melt occurs in the industrial environment, both product attributes and equipment cost must be evaluated. For many applications both the single and twin-screw extruder will produce the desired homogeneous melt… needed to form the product through an extrusion die. Some applications such as dispersive mixing of solids in a polymer matrix are best accomplished in a twin-screw extruder. On the other hand, applications involving chemical reactions, color concentrate distributive mixing, and in line polymer-polymer distributive mixing can be accomplished with either device.However, for the same production rate, twin-screw extruders are generally more expensive than single-screw extruders with a diameter less than 200 mm. Therefore, a thorough understanding is needed for the concepts of solids conveying, melting, and mixing for the two types of extruders to make appropriate process acquisition decisions. This book covers engineering and technology concepts that should aid the practitioner in comparing these two types of extrusion equipment relative to process requirements.The handbook is intended for newcomers interested in the theoretical and regulatory aspects of validation and for thermal analysis practitioners who have to validate their equipment and methods. Covers engineering and technology concepts to aid the practitioner in comparing single-screw or twin-screw extruders relative to process requirements. The handbook is intended for newcomers interested in the theoretical and regulatory aspects of validation and for thermal analysis practitioners who have to validate their equipment and methods. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
- Tapa dura
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 101,55
Envío por EUR 17,57Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: As New. Unread book in perfect condition.
- Más imágenes
- Tapa dura
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 99,99
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Neuware -Single-screw or twin-screw extruder When the need to produce a homogeneous polymer melt occurs in the industrial environment, both product attributes and equipment cost must be evaluated. For many applications both the single and twin-screw extruder will produce the desired homogeneous melt needed…to form the product through an extrusion die. Some applications such as dispersive mixing of solids in a polymer matrix are best accomplished in a twin-screw extruder. On the other hand, applications involving chemical reactions, color concentrate distributive mixing, and in line polymer-polymer distributive mixing can be accomplished with either device.However, for the same production rate, twin-screw extruders are generally more expensive than single-screw extruders with a diameter less than 200 mm. Therefore, a thorough understanding is needed for the concepts of solids conveying, melting, and mixing for the two types of extruders to make appropriate process acquisition decisions. This book covers engineering and technology concepts that should aid the practitioner in comparing these two types of extrusion equipment relative to process requirements. 234 pp. Englisch.
- Más imágenes
- Tapa dura
Librería: Rheinberg-Buch Andreas Meier eK, Bergisch Gladbach, AlemaniaRheinberg-Buch Andreas Meier eK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 99,99
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Neuware -Single-screw or twin-screw extruder When the need to produce a homogeneous polymer melt occurs in the industrial environment, both product attributes and equipment cost must be evaluated. For many applications both the single and twin-screw extruder will produce the desired homogeneous melt needed…to form the product through an extrusion die. Some applications such as dispersive mixing of solids in a polymer matrix are best accomplished in a twin-screw extruder. On the other hand, applications involving chemical reactions, color concentrate distributive mixing, and in line polymer-polymer distributive mixing can be accomplished with either device.However, for the same production rate, twin-screw extruders are generally more expensive than single-screw extruders with a diameter less than 200 mm. Therefore, a thorough understanding is needed for the concepts of solids conveying, melting, and mixing for the two types of extruders to make appropriate process acquisition decisions. This book covers engineering and technology concepts that should aid the practitioner in comparing these two types of extrusion equipment relative to process requirements. 234 pp. Englisch.
- Más imágenes
- Tapa dura
Librería: Wegmann1855, Zwiesel, AlemaniaWegmann1855
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 99,99
Envío por EUR 25,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Neuware -Single-screw or twin-screw extruder When the need to produce a homogeneous polymer melt occurs in the industrial environment, both product attributes and equipment cost must be evaluated. For many applications both the single and twin-screw extruder will produce the desired homogeneous melt needed…to form the product through an extrusion die. Some applications such as dispersive mixing of solids in a polymer matrix are best accomplished in a twin-screw extruder. On the other hand, applications involving chemical reactions, color concentrate distributive mixing, and in line polymer-polymer distributive mixing can be accomplished with either device.However, for the same production rate, twin-screw extruders are generally more expensive than single-screw extruders with a diameter less than 200 mm. Therefore, a thorough understanding is needed for the concepts of solids conveying, melting, and mixing for the two types of extruders to make appropriate process acquisition decisions. This book covers engineering and technology concepts that should aid the practitioner in comparing these two types of extrusion equipment relative to process requirements.The handbook is intended for newcomers interested in the theoretical and regulatory aspects of validation and for thermal analysis practitioners who have to validate their equipment and methods.
- Tapa dura
Librería: THE SAINT BOOKSTORE, Southport, Reino UnidoTHE SAINT BOOKSTORE
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 113,13
Envío por EUR 15,18Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardback. Condición: New. New copy - Usually dispatched within 4 working days.
- Más imágenes
- Tapa dura
Librería: Rarewaves.com USA, London, LONDO, Reino UnidoRarewaves.com USA
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 137,89
Gastos de envío gratisSe envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Hardback. Condición: New. Single-screw or twin-screw extruder? When the need to produce a homogeneous polymer melt occurs in the industrial environment, both product attributes and equipment cost must be evaluated. For many applications both the single and twin-screw extruder will produce the desired homogeneous melt needed to f…orm the product through an extrusion die. Some applications such as dispersive mixing of solids in a polymer matrix are best accomplished in a twin-screw extruder. On the other hand, applications involving chemical reactions, color concentrate distributive mixing, and in line polymer-polymer distributive mixing can be accomplished with either device.However, for the same production rate, twin-screw extruders are generally more expensive than single-screw extruders with a diameter less than 200 mm. Therefore, a thorough understanding is needed for the concepts of solids conveying, melting, and mixing for the two types of extruders to make appropriate process acquisition decisions. This book covers engineering and technology concepts that should aid the practitioner in comparing these two types of extrusion equipment relative to process requirements.The handbook is intended for newcomers interested in the theoretical and regulatory aspects of validation and for thermal analysis practitioners who have to validate their equipment and methods.
- Tapa dura
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 127,24
Envío por EUR 11,71Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Hardcover. Condición: Brand New. 220 pages. 9.57x6.93x0.79 inches. In Stock.
- Más imágenes
- Tapa dura
- Primera edición
Librería: Akademische Buchhandlung Antiquariat, Freiberg, AlemaniaAkademische Buchhandlung Antiquariat
Contactar con el vendedorVendedor de 5 estrellasMiembro de asociación: BOEV
Condición: Usado - Excelente
EUR 120,00
Envío por EUR 17,50Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. Condición: Sehr gut. 1. Auflage. 484 S., Lwd., silbergepr. Front- und Rückentitel, 27 Karten gefaltet im Lwd.-Schuber, Bibex., typisch gestempelt, minimalst gebrauchsspurig, sauber, stabil und komplett, vers. Versand in DE 7,50 EUR !!.
- Tapa dura
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 147,88
Envío por EUR 7,61Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 3 disponibles
Condición: New.
- Tapa dura
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 147,02
Envío por EUR 11,71Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. Condición: Brand New. 220 pages. 9.57x6.93x0.79 inches. In Stock.
- Más imágenes
- Tapa dura
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 85,80
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Extruder Processing | Comparison of Single- and Twin-Screw Extruders for Optimal Solids Conveying, Melting, and Mixing | Paul G. Andersen (u. a.) | Buch | XIV | Englisch | 2022 | Hanser Publications | EAN 9781569908631 | Verantwortliche Person für die EU: Carl Hanser Verlag GmbH & [.], Vilshofener Str. 10,…81679 München, info[at]hanser[dot]de | Anbieter: preigu.
- Más imágenes
- Tapa dura
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 99,99
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Neuware -Single-screw or twin-screw extruder When the need to produce a homogeneous polymer melt occurs in the industrial environment, both product attributes and equipment cost must be evaluated. For many applications both the single and twin-screw extruder will produce the desired homogeneous melt needed…to form the product through an extrusion die. Some applications such as dispersive mixing of solids in a polymer matrix are best accomplished in a twin-screw extruder. On the other hand, applications involving chemical reactions, color concentrate distributive mixing, and in line polymer-polymer distributive mixing can be accomplished with either device.However, for the same production rate, twin-screw extruders are generally more expensive than single-screw extruders with a diameter less than 200 mm. Therefore, a thorough understanding is needed for the concepts of solids conveying, melting, and mixing for the two types of extruders to make appropriate process acquisition decisions. This book covers engineering and technology concepts that should aid the practitioner in comparing these two types of extrusion equipment relative to process requirements.The handbook is intended for newcomers interested in the theoretical and regulatory aspects of validation and for thermal analysis practitioners who have to validate their equipment and methods.Carl Hanser Verlag GmbH & Co.KG, Vilshofener Straße 10, 81679 München 234 pp. Englisch.
- Tapa dura
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 166,00
Envío por EUR 3,51Se envía dentro de Estados Unidos de AmericaCantidad disponible: 3 disponibles
Condición: New.
- Más imágenes
- Tapa dura
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 102,62
Envío por EUR 63,54Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Neuware - Single-screw or twin-screw extruder When the need to produce a homogeneous polymer melt occurs in the industrial environment, both product attributes and equipment cost must be evaluated. For many applications both the single and twin-screw extruder will produce the desired homogeneous melt needed… to form the product through an extrusion die. Some applications such as dispersive mixing of solids in a polymer matrix are best accomplished in a twin-screw extruder. On the other hand, applications involving chemical reactions, color concentrate distributive mixing, and in line polymer-polymer distributive mixing can be accomplished with either device.However, for the same production rate, twin-screw extruders are generally more expensive than single-screw extruders with a diameter less than 200 mm. Therefore, a thorough understanding is needed for the concepts of solids conveying, melting, and mixing for the two types of extruders to make appropriate process acquisition decisions. This book covers engineering and technology concepts that should aid the practitioner in comparing these two types of extrusion equipment relative to process requirements.
- Más imágenes
- Tapa dura
Librería: Rarewaves.com UK, London, Reino UnidoRarewaves.com UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 128,31
Envío por EUR 76,12Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Hardback. Condición: New. Single-screw or twin-screw extruder? When the need to produce a homogeneous polymer melt occurs in the industrial environment, both product attributes and equipment cost must be evaluated. For many applications both the single and twin-screw extruder will produce the desired homogeneous melt needed to f…orm the product through an extrusion die. Some applications such as dispersive mixing of solids in a polymer matrix are best accomplished in a twin-screw extruder. On the other hand, applications involving chemical reactions, color concentrate distributive mixing, and in line polymer-polymer distributive mixing can be accomplished with either device.However, for the same production rate, twin-screw extruders are generally more expensive than single-screw extruders with a diameter less than 200 mm. Therefore, a thorough understanding is needed for the concepts of solids conveying, melting, and mixing for the two types of extruders to make appropriate process acquisition decisions. This book covers engineering and technology concepts that should aid the practitioner in comparing these two types of extrusion equipment relative to process requirements.The handbook is intended for newcomers interested in the theoretical and regulatory aspects of validation and for thermal analysis practitioners who have to validate their equipment and methods.
- Más imágenes
- Tapa dura
Librería: Books-by-Floh, Paderborn, AlemaniaBooks-by-Floh
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 130,84
Envío por EUR 105,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Buch. Condición: Neu. Neuware -Single-screw or twin-screw extruder When the need to produce a homogeneous polymer melt occurs in the industrial environment, both product attributes and equipment cost must be evaluated. For many applications both the single and twin-screw extruder will produce the desired homogeneous melt needed…to form the product through an extrusion die. Some applications such as dispersive mixing of solids in a polymer matrix are best accomplished in a twin-screw extruder. On the other hand, applications involving chemical reactions, color concentrate distributive mixing, and in line polymer-polymer distributive mixing can be accomplished with either device.However, for the same production rate, twin-screw extruders are generally more expensive than single-screw extruders with a diameter less than 200 mm. Therefore, a thorough understanding is needed for the concepts of solids conveying, melting, and mixing for the two types of extruders to make appropriate process acquisition decisions. This book covers engineering and technology concepts that should aid the practitioner in comparing these two types of extrusion equipment relative to process requirements.The handbook is intended for newcomers interested in the theoretical and regulatory aspects of validation and for thermal analysis practitioners who have to validate their equipment and methods. 234 pp. Englisch.
Librería: Vangsgaards Antikvariat Aps, Copenhagen, DinamarcaVangsgaards Antikvariat Aps
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado
EUR 20,66
Envío por EUR 29,44Se envía de Dinamarca a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Añadir al carritoArtimus, Aalborg Øst 1985. Illustrationer i s/h. 181 sider. Orig. omslag. Lette brugsspor. * Med dedikation til Jørgen Leth fra Paul NNørgaard Andersen.
