Lachmayer roland (185 resultados)

Condición: New. In English.

Paperback. Condición: new. Paperback. Although additive manufacturing is a relatively young discipline, the effects that can be achieved with the various additive technologies in terms of efficient product and manufacturing process optimization are of outstanding importance. These processes offer innovative and versatile opportunities for accelerated product design and advanced design and manufacturing process optimization. In addition, the use of nature-based technologies also makes it possible to manufacture components with extreme complexity and internal structures that were very difficult or impossible to produce using conventional methods. Lightweight design and energy savings, also in the product life cycle, can thus be realized with the same stability and load-bearing capacity. This book describes how the potential of additive manufacturing can be used specifically in product development to design highly efficient products. For this purpose, the contents are linked holistically in the sense of development processes of product creation. Although additive manufacturing is a relatively young discipline, the effects that can be achieved with the various additive technologies in terms of efficient product and manufacturing process optimization are of outstanding importance. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Condición: New.

Condición: New.

XV, 233 S. Broschur. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Deutsch.

Condición: New.

Paperback. Condición: Brand New. 268 pages. 9.25x6.10x0.39 inches. In Stock.

Paperback. Condición: new. Paperback. Although additive manufacturing is a relatively young discipline, the effects that can be achieved with the various additive technologies in terms of efficient product and manufacturing process optimization are of outstanding importance. These processes offer innovative and versatile opportunities for accelerated product design and advanced design and manufacturing process optimization. In addition, the use of nature-based technologies also makes it possible to manufacture components with extreme complexity and internal structures that were very difficult or impossible to produce using conventional methods. Lightweight design and energy savings, also in the product life cycle, can thus be realized with the same stability and load-bearing capacity. This book describes how the potential of additive manufacturing can be used specifically in product development to design highly efficient products. For this purpose, the contents are linked holistically in the sense of development processes of product creation. Although additive manufacturing is a relatively young discipline, the effects that can be achieved with the various additive technologies in terms of efficient product and manufacturing process optimization are of outstanding importance. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.…

Condición: New. A brand new book in pristine condition. Showing zero signs of shelf wear, creases, or damage.

Condición: New. A brand new book in pristine condition. Showing zero signs of shelf wear, creases, or damage.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Although additive manufacturing is a relatively young discipline, the effects that can be achieved with the various additive technologies in terms of efficient product and manufacturing process optimization are of outstanding importance. These processes offer innovative and versatile opportunities for accelerated product design and advanced design and manufacturing process optimization. In addition, the use of nature-based technologies also makes it possible to manufacture components with extreme complexity and internal structures that were very difficult or impossible to produce using conventional methods. Lightweight design and energy savings, also in the product life cycle, can thus be realized with the same stability and load-bearing capacity. This book describes how the potential of additive manufacturing can be used specifically in product development to design highly efficient products. For this purpose, the contents are linked holistically in the sense of development processes of product creation.…

Softcover. Condición: Gut. 191 S. Ehem. Bibliotheksexemplar mit Signatur und Stempel. GUTER Zustand, ein paar Gebrauchsspuren. Ex-library with stamp and library-signature. GOOD condition, some traces of use. L16033 9783662597880 Sprache: Deutsch Gewicht in Gramm: 430.

Taschenbuch. Condición: Neu. Design for Additive Manufacturing | Roland Lachmayer (u. a.) | Taschenbuch | xi | Englisch | 2024 | Springer | EAN 9783662684627 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Condición: New. A brand new book in pristine condition. Showing zero signs of shelf wear, creases, or damage.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - The book 'Methodology for the Development of Sustainable Products offers readers various ways in which proven methods of product development can be usefully supplemented from a sustainability perspective. It combines familiar and successfully established methods with new approaches that we have researched and tested in practice in recent years, with a focus on sustainable solutions. Starting with primarily strategic considerations on systems and business models as well as relevant norms and standards, concrete methods and techniques are presented in the further course of the book, which are supplemented by case studies in the individual chapters. The content of this book is based on many years of practical experience from life, 15 years of working in industry, as well as.…

Condición: New.

Taschenbuch. Condición: Neu. Methodology for the Development of Sustainable Products | Roland Lachmayer (u. a.) | Taschenbuch | xii | Englisch | 2026 | Springer | EAN 9783662724415 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

Condición: New. In English.

Condición: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | The book describes and explains the results of the collaborative project Generative Manufacturing of Optical, Thermal and Structural Components over the last three years. The overall goal is the development of a system concept based on generative manufacturing for integrated optical and optomechanical systems. Different developed generative manufacturing processes for glass and specially designed metal powders have been implemented in a single fabrication set up enabling multi-material manufacturing of optical components and systems. The main focus of the project is split into several topics: simulation, design, material engineering, process engineering, post-processing and component evaluation. The simulation of the glass printing process will be structured iteratively with a comparison of the experimental results in order to be able to finally make a prediction of the necessary parameter sizes for defined components. A metal material with similar thermal conductivity and thermal expansion properties to glass or laser-active crystals has been developed iteratively over the course of the project to enable direct printing onto these materials. In order to demonstrate the potential of generatively manufactured optomechanics for function-integrated systems, the optomechanical components required for a solid-state laser system are manufactured in a polymer-based 3D printing process and their properties are characterized. All these individual projects of the overall network are combined in the system concept.…

Condición: New.

Kartoniert / Broschiert. Condición: New.

Condición: New.

Condición: New. In English.

Taschenbuch. Condición: Neu. Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK) | Roland Lachmayer (u. a.) | Taschenbuch | xiii | Englisch | 2022 | Springer | EAN 9783030965006 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Condición: New.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - The book describes and explains the results of the collaborative project Generative Manufacturing of Optical, Thermal and Structural Components over the last three years. The overall goal is the development of a system concept based on generative manufacturing for integrated optical and optomechanical systems. Different developed generative manufacturing processes for glass and specially designed metal powders have been implemented in a single fabrication set up enabling multi-material manufacturing of optical components and systems. The main focus of the project is split into several topics: simulation, design, material engineering, process engineering, post-processing and component evaluation. The simulation of the glass printing process will be structured iteratively with a comparison of the experimental results in order to be able to finally make a prediction of the necessary parameter sizes for defined components. A metal material with similar thermal conductivity and thermal expansion properties to glass or laser-active crystals has been developed iteratively over the course of the project to enable direct printing onto these materials. In order to demonstrate the potential of generatively manufactured optomechanics for function-integrated systems, the optomechanical components required for a solid-state laser system are manufactured in a polymer-based 3D printing process and their properties are characterized. All these individual projects of the overall network are combined in the system concept.…

Condición: New. In English.

Taschenbuch. Condición: Neu. Innovative Product Development by Additive Manufacturing 2021 | Roland Lachmayer (u. a.) | Taschenbuch | xii | Englisch | 2022 | Springer | EAN 9783031059179 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

paperback. Condición: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: New. 1st ed. 2022 edition NO-PA16APR2015-KAP.