Hina nazli (37 resultados)

Condición: New.

Condición: New.

Condición: New.

Taschenbuch. Condición: Neu. Fabrication and Characterization of Zn Substituted Cu-Cr Ferrites | Fabrication and Characterization of Spinel Ferrites | Hina Nazli (u. a.) | Taschenbuch | 76 S. | Englisch | 2015 | LAP LAMBERT Academic Publishing | EAN 9783659808753 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. …

Condición: New.

Condición: New.

Taschenbuch. Condición: Neu. Fabricação e caracterização de ferrites de Cu-Cr substituídas por Zn | Fabricação e caracterização de ferrites espinélio | Hina Nazli (u. a.) | Taschenbuch | Portugiesisch | 2026 | Edições Nosso Conhecimento | EAN 9786209604485 | Verantwortliche Person für die EU: SIA OmniScriptum Publishing, Brivibas Gatve 197, 1039 RIGA, LETTLAND, customerservice[at]vdm-vsg[dot]de | Anbieter: preigu.…

Taschenbuch. Condición: Neu. Fabbricazione e caratterizzazione di ferriti Cu-Cr sostituite con Zn | Fabbricazione e caratterizzazione di ferriti spinello | Hina Nazli (u. a.) | Taschenbuch | Italienisch | 2026 | Edizioni Sapienza | EAN 9786209609602 | Verantwortliche Person für die EU: Edizioni Sapienza, Brivibas Gatve 197, 1039 RIGA, LETTLAND, customerservice[at]vdm-vsg[dot]de | Anbieter: preigu.…

Taschenbuch. Condición: Neu. Wytwarzanie i charakterystyka ferrytów Cu-Cr z domieszk¿ cynku | Wytwarzanie i charakterystyka ferrytów spinelowych | Hina Nazli (u. a.) | Taschenbuch | Polnisch | 2026 | Wydawnictwo Nasza Wiedza | EAN 9786209699207 | Verantwortliche Person für die EU: SIA OmniScriptum Publishing, Brivibas Gatve 197, 1039 RIGA, LETTLAND, customerservice[at]vdm-vsg[dot]de | Anbieter: preigu.…

Taschenbuch. Condición: Neu. Herstellung und Charakterisierung von Zn-substituierten Cu-Cr-Ferriten | Herstellung und Charakterisierung von Spinellferriten | Hina Nazli (u. a.) | Taschenbuch | 60 S. | Deutsch | 2026 | Verlag Unser Wissen | EAN 9786209607042 | Verantwortliche Person für die EU: Verlag Unser Wissen, Brivibas Gatve 197, 1039 RIGA, LETTLAND, customerservice[at]vdm-vsg[dot]de | Anbieter: preigu. …

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This research project is aimed to fabricate and characterize zinc substituted copper chromium spinel ferrites of compositional scheme of ZnxCu1-x Cr0.5Fe1.5O4 (Where x=0, 0.2, 0.4, 0.6, 0.8) prepared by powder metallurgical methods using 99.99% commercially available ZnO, CuO, Cr2O3 and Fe2O3 as starting material. Accurately weigh powder were ball milled and calcined for 24 hours at 1100ºC. Then the calcined powders were homogenized using A-gate motor- pestle then sintered at 900oC for 10hours. Thermal, structural, morphological, elemental, magnetic, optical and dielectric properties were carried out using TGA-DTA, XRD, FESEM, EDS, VSM, FTIR and LCR meter respectively. TGA-DTA data provides the optimum temperature for the fabrication of spinel ferrites and later XRD micrographs reveal the formation of single phase spinel structure showing lattice parameters increases and x-ray and bulk density decreases as Zn content increases. FESEM shows the aggregated grain growth. FTIR spectra show two prominent bands in the range of 400-800 cm-1 which confirm the formation of spinel ferrites. The dielectric loss tangent and dielectric constant (_) decreases as frequency increases. 76 pp. Englisch.…

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - This research project is aimed to fabricate and characterize zinc substituted copper chromium spinel ferrites of compositional scheme of ZnxCu1-x Cr0.5Fe1.5O4 (Where x=0, 0.2, 0.4, 0.6, 0.8) prepared by powder metallurgical methods using 99.99% commercially available ZnO, CuO, Cr2O3 and Fe2O3 as starting material. Accurately weigh powder were ball milled and calcined for 24 hours at 1100ºC. Then the calcined powders were homogenized using A-gate motor- pestle then sintered at 900oC for 10hours. Thermal, structural, morphological, elemental, magnetic, optical and dielectric properties were carried out using TGA-DTA, XRD, FESEM, EDS, VSM, FTIR and LCR meter respectively. TGA-DTA data provides the optimum temperature for the fabrication of spinel ferrites and later XRD micrographs reveal the formation of single phase spinel structure showing lattice parameters increases and x-ray and bulk density decreases as Zn content increases. FESEM shows the aggregated grain growth. FTIR spectra show two prominent bands in the range of 400-800 cm-1 which confirm the formation of spinel ferrites. The dielectric loss tangent and dielectric constant (_) decreases as frequency increases.…

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Nazli HinaI am one of the PhD.scholar of an emerging women university of Pakistan, Lahore College for women university Lahore, Pakistan. Magnetic materials are the area of my interest. Now I am working on optoelectric and optomagneti.…

PAP. Condición: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

PAP. Condición: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

PAP. Condición: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This research project is aimed to fabricate and characterize zinc substituted copper chromium spinel ferrites of compositional scheme of ZnxCu1-x Cr0.5Fe1.5O4 (Where x=0, 0.2, 0.4, 0.6, 0.8) prepared by powder metallurgical methods using 99.99% commercially available ZnO, CuO, Cr2O3 and Fe2O3 as starting material. Accurately weigh powder were ball milled and calcined for 24 hours at 1100ºC. Then the calcined powders were homogenized using A-gate motor- pestle then sintered at 900oC for 10hours. Thermal, structural, morphological, elemental, magnetic, optical and dielectric properties were carried out using TGA-DTA, XRD, FESEM, EDS, VSM, FTIR and LCR meter respectively. TGA-DTA data provides the optimum temperature for the fabrication of spinel ferrites and later XRD micrographs reveal the formation of single phase spinel structure showing lattice parameters increases and x-ray and bulk density decreases as Zn content increases. FESEM shows the aggregated grain growth. FTIR spectra show two prominent bands in the range of 400-800 cm-1 which confirm the formation of spinel ferrites. The dielectric loss tangent and dielectric constant (¿) decreases as frequency increases.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 76 pp. Englisch.…

PAP. Condición: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

PAP. Condición: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

PAP. Condición: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

PAP. Condición: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

PAP. Condición: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware 60 pp. Polnisch.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware 60 pp. Italienisch.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware 60 pp. Portugiesisch.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Dieses Forschungsprojekt zielt darauf ab, Zink-substituierte Kupfer-Chrom-Spinellferrite mit der Zusammensetzung ZnxCu1-x Cr0,5Fe1,5O4 (wobei x = 0, 0,2, 0,4, 0,6, 0,8) herzustellen und zu charakterisieren, die durch pulvermetallurgische Verfahren unter Verwendung von 99,99 % handelsüblichem ZnO, CuO, Cr2O3 und Fe2O3 als Ausgangsmaterial hergestellt werden. Das genau abgewogene Pulver wurde in einer Kugelmühle gemahlen und 24 Stunden lang bei 1100 °C kalziniert. Anschließend wurden die kalzinierten Pulver mit einem A-Gate-Motor-Stößel homogenisiert und dann 10 Stunden lang bei 900 °C gesintert. Die thermischen, strukturellen, morphologischen, elementaren, magnetischen, optischen und dielektrischen Eigenschaften wurden jeweils mit TGA-DTA, XRD, FESEM, EDS, VSM, FTIR und LCR-Messgerät untersucht. Die TGA-DTA-Daten liefern die optimale Temperatur für die Herstellung von Spinellferriten, und spätere XRD-Mikroskopaufnahmen zeigen die Bildung einer einphasigen Spinellstruktur mit zunehmenden Gitterparametern und abnehmender Röntgen- und Schüttdichte bei steigendem Zn-Gehalt. FESEM zeigt das aggregierte Kornwachstum. FTIR-Spektren zeigen zwei markante Banden im Bereich von 400-800 cm-1, die die Bildung von Spinellferriten bestätigen. Die dielektrische Verlustfunktion und die Dielektrizitätskonstante ( ) nehmen mit steigender Frequenz ab. 60 pp. Deutsch.…

Condición: New. Print on Demand.

Paperback. Condición: new. Paperback. Questo progetto di ricerca ha lo scopo di fabbricare e caratterizzare ferriti spinello rame-cromo sostituite con zinco con schema compositivo ZnxCu1-x Cr0.5Fe1.5O4 (dove x=0, 0,2, 0,4, 0,6, 0,8) preparate con metodi di metallurgia delle polveri utilizzando ZnO, CuO, Cr2O3 e Fe2O3 disponibili in commercio al 99,99% come materiale di partenza. Le polveri accuratamente pesate sono state macinate in un mulino a sfere e calcinate per 24 ore a 1100 0C. Successivamente, le polveri calcinate sono state omogeneizzate utilizzando un pestello motorizzato A-gate e poi sinterizzate a 900 0C per 10 ore. Le proprieta termiche, strutturali, morfologiche, elementari, magnetiche, ottiche e dielettriche sono state analizzate utilizzando rispettivamente TGA-DTA, XRD, FESEM, EDS, VSM, FTIR e LCR meter. I dati TGA-DTA forniscono la temperatura ottimale per la fabbricazione di ferriti spinelliche e successivamente le micrografie XRD rivelano la formazione di una struttura spinellica monofasica che mostra un aumento dei parametri reticolari e una diminuzione della densita dei raggi X e della densita apparente all'aumentare del contenuto di Zn. Il FESEM mostra la crescita aggregata dei grani. Gli spettri FTIR mostrano due bande prominenti nell'intervallo 400-800 cm-1 che confermano la formazione di ferriti spinelliche. La tangente di perdita dielettrica e la costante dielettrica (e) diminuiscono all'aumentare della frequenza. This item is printed on demand. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability. …

Paperback. Condición: new. Paperback. Este projeto de pesquisa tem como objetivo fabricar e caracterizar ferrites espinelio de cobre-cromo substituidas por zinco com esquema composicional de ZnxCu1-x Cr0,5Fe1,5O4 (onde x=0, 0,2, 0,4, 0,6, 0,8) preparadas por metodos metalurgicos de po utilizando ZnO, CuO, Cr2O3 e Fe2O3 comercialmente disponiveis a 99,99% como material de partida. O po pesado com precisao foi moido em moinho de bolas e calcinado durante 24 horas a 1100 0C. Em seguida, os pos calcinados foram homogeneizados utilizando um motor-pistilo A-gate e, depois, sinterizados a 900 0C durante 10 horas. As propriedades termicas, estruturais, morfologicas, elementares, magneticas, oticas e dieletricas foram determinadas utilizando TGA-DTA, XRD, FESEM, EDS, VSM, FTIR e medidor LCR, respetivamente. Os dados TGA-DTA fornecem a temperatura ideal para a fabricacao de ferrites espinelio e, posteriormente, as micrografias XRD revelam a formacao de uma estrutura espinelio de fase unica, mostrando aumentos nos parametros da rede e diminuicoes na densidade de raios X e densidade aparente a medida que o teor de Zn aumenta. O FESEM mostra o crescimento agregado dos graos. Os espectros FTIR mostram duas bandas proeminentes na faixa de 400-800 cm-1, que confirmam a formacao de ferrites espinelio. A tangente de perda dieletrica e a constante dieletrica (e) diminuem a medida que a frequencia aumenta. This item is printed on demand. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.…

Condición: New. PRINT ON DEMAND.