G dobmann (32 resultados)

Condición: Good. 892 pp., hardcover, ex library else text clean & binding tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.…

Condición: As New. Unread book in perfect condition.

Condición: New. In English.

Condición: New.

Condición: New.

Condición: New.

Condición: New. pp. XIII, 115 58 illus., 32 illus. in color. Softcover reprint of the original 1st ed. 2016 edition NO-PA16APR2015-KAP.

Condición: New. In English.

Condición: As New. Unread book in perfect condition.

Condición: New.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Engineering structures for reliable function and safety have to be designed such that operational mechanical loads are compensated for by stresses in the components bearable by the materials used. Vhat is 'bearable' First of all it depends on the properties of the chosen materials as well as on several other parameters, e.g. temperature, corrosivity of the environment, elapsed or remaining serviceable life, unexpected deterioration of materials, whatever the source and nature of such deterioration may be: defects, loss of strength, embrittlement, wastage, etc. DEFECTS and PROPERTIES of materials currently determine loadability. Therefore in addition to nondestructive testing for defects there is also a need for nondestructive testing of properties. The third type of information to be supplied by nondestructive measurement pertains to STRESS STATES under OPERATIONAL LOADS, i.e. LOAD-INDUCED plus RESIDUAL STRESSES. Residual stresses normally cannot be calculated; they have to be measured nondestructively; well-approved elastomechanical finite element codes are available and used for calculating load-induced stresses; for redundancy and reliability, engineers, however, need procedures and instrumentation for experimental checks. …

Condición: New. In English.

Condición: New. pp. 916.

Paperback. Condición: Brand New. 916 pages. 9.49x6.22x2.09 inches. In Stock.

Condición: New.

Paperback. Condición: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Hardcover. Condición: Brand New. 9.25x6.25x0.50 inches. In Stock.

Paperback. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: As New. Unread book in perfect condition.

Condición: Sehr gut. Zustand: Sehr gut | Seiten: 910 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.

Condición: new. Questo è un articolo print on demand.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Provides quantitative and qualitative measures of the geometric features and imperfections of weldsDefines more restrictive acceptance criteria based on weld geometry features and imperfections with increased fatigue strengthOffers guidance.…

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Engineering structures for reliable function and safety have to be designed such that operational mechanical loads are compensated for by stresses in the components bearable by the materials used. Vhat is 'bearable' First of all it depends on the properties of the chosen materials as well as on several other parameters, e.g. temperature, corrosivity of the environment, elapsed or remaining serviceable life, unexpected deterioration of materials, whatever the source and nature of such deterioration may be: defects, loss of strength, embrittlement, wastage, etc. DEFECTS and PROPERTIES of materials currently determine loadability. Therefore in addition to nondestructive testing for defects there is also a need for nondestructive testing of properties. The third type of information to be supplied by nondestructive measurement pertains to STRESS STATES under OPERATIONAL LOADS, i.e. LOAD-INDUCED plus RESIDUAL STRESSES. Residual stresses normally cannot be calculated; they have to be measured nondestructively; well-approved elastomechanical finite element codes are available and used for calculating load-induced stresses; for redundancy and reliability, engineers, however, need procedures and instrumentation for experimental checks. 916 pp. Englisch.…

Condición: New. Print on Demand pp. XIII, 115 58 illus., 32 illus. in color.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Organized by Deutsche Gesellschaft fuer zerstoerungsfreie Pruefung e.V. (DGZfP), Berlin and Fraunhofer-Institut fuer zerstoerungsfreie Pruefverfahren (IzfP), SaarbrueckenEngineering structures for reliable function and safety have to be designed such that oper.…

Condición: New. PRINT ON DEMAND pp. XIII, 115 58 illus., 32 illus. in color.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Provides quantitative and qualitative measures of the geometric features and imperfections of weldsDefines more restrictive acceptance criteria based on weld geometry features and imperfections with increased fatigue strengthOffers guidance.…

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Engineering structures for reliable function and safety have to be designed such that operational mechanical loads are compensated for by stresses in the components bearable by the materials used. Vhat is 'bearable' First of all it depends on the properties of the chosen materials as well as on several other parameters, e.g. temperature, corrosivity of the environment, elapsed or remaining serviceable life, unexpected deterioration of materials, whatever the source and nature of such deterioration may be: defects, loss of strength, embrittlement, wastage, etc. DEFECTS and PROPERTIES of materials currently determine loadability. Therefore in addition to nondestructive testing for defects there is also a need for nondestructive testing of properties. The third type of information to be supplied by nondestructive measurement pertains to STRESS STATES under OPERATIONAL LOADS, i.e. LOAD-INDUCED plus RESIDUAL STRESSES. Residual stresses normally cannot be calculated; they have to be measured nondestructively; well-approved elastomechanical finite element codes are available and used for calculating load-induced stresses; for redundancy and reliability, engineers, however, need procedures and instrumentation for experimental checks.Springer-Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 916 pp. Englisch.…

Condición: New. Print on Demand pp. 916 609 Figures, 49:B&W 6.14 x 9.21 in or 234 x 156 mm (Royal 8vo) Perfect Bound on White w/Gloss Lam.

Condición: New. PRINT ON DEMAND pp. 916.