Filtrar la búsqueda

  • Libros (14)

  • Nuevo (14)

a

Intervalo de precios personalizado (EUR)

a

Darji yashesh a (14 resultados)

Autor: 
Refinar con la Búsqueda avanzada
  • Idioma: Inglés

    Editorial: LAP LAMBERT Academic Publishing, 2014

    3659555886 / 9783659555886

    • Tapa blanda

    Librería: California Books, Miami, FL, Estados Unidos de AmericaCalifornia Books

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 45,08

    Envío por EUR 2,74 
    Se envía dentro de Estados Unidos de America

    Cantidad disponible: Más de 20 disponibles

    Condición: New.

  • Idioma: Inglés

    Editorial: LAP LAMBERT Academic Publishing, 2014

    3659555886 / 9783659555886

    • Tapa blanda

    Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 44,68

    Envío por EUR 10,09 
    Se envía de Reino Unido a Estados Unidos de America

    Cantidad disponible: Más de 20 disponibles

    Condición: New. In English.

  • Idioma: Inglés

    Editorial: VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2014

    3659555886 / 9783659555886

    • Tapa blanda

    Librería: Books Puddle, Woodside, NY, Estados Unidos de AmericaBooks Puddle

    Vendedor de 4 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 72,06

    Envío por EUR 3,64 
    Se envía dentro de Estados Unidos de America

    Cantidad disponible: 4 disponibles

    Condición: New. pp. 72.

  • Idioma: Inglés

    Editorial: LAP LAMBERT Academic Publishing, 2017

    3659580309 / 9783659580307

    • Tapa blanda

    Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 90,40

    Envío por EUR 11,93 
    Se envía de Reino Unido a Estados Unidos de America

    Cantidad disponible: 1 disponible

    Paperback. Condición: Brand New. 128 pages. 8.66x5.91x0.29 inches. In Stock.

  • Idioma: Inglés

    Editorial: LAP LAMBERT Academic Publishing, 2017

    3659580309 / 9783659580307

    • Tapa blanda

    Librería: preigu, Osnabrück, Alemaniapreigu

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 44,30

    Envío por EUR 70,00 
    Se envía de Alemania a Estados Unidos de America

    Cantidad disponible: 5 disponibles

    Taschenbuch. Condición: Neu. An Experimental Investigation with CNT | An Experimental Investigation of MRR, Surface Roughness and Toolwear Ratio In EDM with Carbon Nano Tubes | Yashesh A. Darji (u. a.) | Taschenbuch | 128 S. | Englisch | 2017 | LAP LAMBERT Academic Publishing | EAN 9783659580307 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

  • Idioma: Inglés

    Editorial: LAP LAMBERT Academic Publishing, 2017

    3659580309 / 9783659580307

    • Tapa blanda

    Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books

    Vendedor de 4 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 163,45

    Envío por EUR 29,83 
    Se envía de Reino Unido a Estados Unidos de America

    Cantidad disponible: 1 disponible

    paperback. Condición: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

  • Idioma: Inglés

    Editorial: LAP LAMBERT Academic Publishing Mai 2017, 2017

    3659580309 / 9783659580307

    • Tapa blanda
    • Impresión bajo demanda

    Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 49,90

    Envío por EUR 23,00 
    Se envía de Alemania a Estados Unidos de America

    Cantidad disponible: 2 disponibles

    Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Electric discharge machining is non conventional machining process used for machining of hard materials which cannot be machined by conventional machining process. Electric discharge machining is an electro sparking method of metal working involving an electric erosion effect. A pulse discharge occurs in a small gap between the work piece and the electrode and removes the unwanted material from the parent metal through melting and vaporizing. Powder-mixed electrical discharge machining is one of the latest techniques for improving material removal rate and also decreased tool wear ratio, surface roughness among other performance characteristics. How ever its utilization in the manufacturing industry is very low because many fundamental issues of this new development such as machining mechanism cost effectiveness of powder and powder concentration in the working fluid together with safety and environmental impact among other are not well understood. 128 pp. Englisch.…

  • Idioma: Inglés

    Editorial: VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2014

    3659555886 / 9783659555886

    • Tapa blanda
    • Impresión bajo demanda

    Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books

    Vendedor de 4 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 72,29

    Envío por EUR 7,76 
    Se envía de Reino Unido a Estados Unidos de America

    Cantidad disponible: 4 disponibles

    Condición: New. Print on Demand pp. 72 2:B&W 6 x 9 in or 229 x 152 mm Perfect Bound on Creme w/Gloss Lam.

  • Idioma: Inglés

    Editorial: LAP LAMBERT Academic Publishing, 2014

    3659555886 / 9783659555886

    • Tapa blanda
    • Impresión bajo demanda

    Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 45,66

    Envío por EUR 35,00 
    Se envía de Alemania a Estados Unidos de America

    Cantidad disponible: 1 disponible

    Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The Twin screw extruder machining process (TSE) is a one of the plastic extrusion technology. The quality of parts produced by the TSE machining is significantly affected by various parameters used in the process. In this present research, Effect of TSE machine processing parameters such as screw speed, barrel temperature and die zone temperature on the mechanical properties was investigated by full factorial design methodology. Three different levels of screw speed (35 rpm, 40 rpm, 45 rpm), barrel temperature (175 C°, 180 C°, 185 C°) and die zone temperature (190 C°, 195 C°, 200 C°) were selected. The response parameters were tensile strength and impact strength of the Polyvinyl chloride (PVC) polymer material. Investigation of the statistical-mathematical analysis results perform by the ANOVA and Regression analysis in MINITAB software that the optimum processing conditions for the PVC polymer material, to achieve the maximum tensile strength and impact strength are screw speed at 45 rpm, barrel temperature at 185 C° and die temperature at 200 C°.…

  • Idioma: Inglés

    Editorial: VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2014

    3659555886 / 9783659555886

    • Tapa blanda
    • Impresión bajo demanda

    Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios

    Vendedor de 4 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 71,73

    Envío por EUR 9,95 
    Se envía de Alemania a Estados Unidos de America

    Cantidad disponible: 4 disponibles

    Condición: New. PRINT ON DEMAND pp. 72.

  • Idioma: Inglés

    Editorial: LAP LAMBERT Academic Publishing, 2014

    3659555886 / 9783659555886

    • Tapa blanda
    • Impresión bajo demanda

    Librería: moluna, Greven, Alemaniamoluna

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 34,25

    Envío por EUR 48,99 
    Se envía de Alemania a Estados Unidos de America

    Cantidad disponible: Más de 20 disponibles

    Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Limbachiya Rohit R.Rohit R. Limbachiya completed M.Tech in Production Engineering from S.P.B Patel Engineering College Linch, Mehsana, GTU - Gujarat and Now work as Assistant Professor at S.S.S.R.I Group of Institute,vadasma college..…

  • Idioma: Inglés

    Editorial: LAP LAMBERT Academic Publishing, 2017

    3659580309 / 9783659580307

    • Tapa blanda
    • Impresión bajo demanda

    Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 55,58

    Envío por EUR 35,00 
    Se envía de Alemania a Estados Unidos de America

    Cantidad disponible: 1 disponible

    Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Electric discharge machining is non conventional machining process used for machining of hard materials which cannot be machined by conventional machining process. Electric discharge machining is an electro sparking method of metal working involving an electric erosion effect. A pulse discharge occurs in a small gap between the work piece and the electrode and removes the unwanted material from the parent metal through melting and vaporizing. Powder-mixed electrical discharge machining is one of the latest techniques for improving material removal rate and also decreased tool wear ratio, surface roughness among other performance characteristics. How ever its utilization in the manufacturing industry is very low because many fundamental issues of this new development such as machining mechanism cost effectiveness of powder and powder concentration in the working fluid together with safety and environmental impact among other are not well understood.…

  • Idioma: Inglés

    Editorial: LAP LAMBERT Academic Publishing, 2017

    3659580309 / 9783659580307

    • Tapa blanda
    • Impresión bajo demanda

    Librería: moluna, Greven, Alemaniamoluna

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 41,71

    Envío por EUR 48,99 
    Se envía de Alemania a Estados Unidos de America

    Cantidad disponible: Más de 20 disponibles

    Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Darji Yashesh A.Yashesh A Darji Assistance Professor of Mechanical Department,C.U. Shah College of Technology & Engineering,Wadhwan,Gujarat,India.Electric discharge machining is non conventional machining process used for machini.…

  • Idioma: Inglés

    Editorial: LAP LAMBERT Academic Publishing Mai 2017, 2017

    3659580309 / 9783659580307

    • Tapa blanda
    • Impresión bajo demanda

    Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 49,90

    Envío por EUR 60,00 
    Se envía de Alemania a Estados Unidos de America

    Cantidad disponible: 1 disponible

    Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Electric discharge machining is non conventional machining process used for machining of hard materials which cannot be machined by conventional machining process. Electric discharge machining is an electro sparking method of metal working involving an electric erosion effect. A pulse discharge occurs in a small gap between the work piece and the electrode and removes the unwanted material from the parent metal through melting and vaporizing. Powder-mixed electrical discharge machining is one of the latest techniques for improving material removal rate and also decreased tool wear ratio, surface roughness among other performance characteristics. How ever its utilization in the manufacturing industry is very low because many fundamental issues of this new development such as machining mechanism cost effectiveness of powder and powder concentration in the working fluid together with safety and environmental impact among other are not well understood.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 128 pp. Englisch.…