D g chetwynd (30 resultados)

Paperback. Condición: Very Good. Mechanics Structures and Thermodynamics. Volume 1 This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. .…

Paperback. Condición: Very Good. Shipped within 24 hours from our UK warehouse. Clean, undamaged book with no damage to pages and minimal wear to the cover. Spine still tight, in very good condition. Remember if you are not happy, you are covered by our 100% money back guarantee.

Paperback. Condición: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

Condición: New.

Condición: New.

Condición: New.

Condición: New.

Condición: New.

Condición: New. pp. 476.

Condición: New. pp. 476 Illus.

Condición: New. In English.

Condición: New. In English.

Condición: As New. Unread book in perfect condition.

Condición: As New. Unread book in perfect condition.

Condición: New. Provides a comprehensive treatment of the metrology and properties of engineering surfaces. The subject matter is a central issue in manufacturing technology, since the quality and reliability of manufactured components depends greatly upon the selection and qualities of the appropriate materials. Editor(s): Mainsah, E.; Greenwood, J.A.; Chetwynd, D. G. Series: Optoelectronics, Imaging and Sensing. Num Pages: 450 pages, biography. BIC Classification: TBMM. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 234 x 156 x 26. Weight in Grams: 840. . 1998. Hardback. . . . .…

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Metrology and Properties of Engineering Surfaces provides in a single volume a comprehensive and authoritative treatment of the crucial topics involved in the metrology and properties of engineering surfaces. The subject matter is a central issue in manufacturing technology, since the quality and reliability of manufactured components depend greatly upon the selection and qualities of the appropriate materials as ascertained through measurement. The book can in broad terms be split into two parts; the first deals with the metrology of engineering surfaces and covers the important issues relating to the measurement and characterization of surfaces in both two and three dimensions. This covers topics such as filtering, power spectral densities, autocorrelation functions and the use of Fractals in topography. A significant proportion is dedicated to the calibration of scanning probe microscopes using the latest techniques. The remainder of the book deals with the properties of engineering surfaces and covers a wide range of topics including hardness (measurement and relevance), surface damage and the machining of brittle surfaces, the characterization of automobile cylinder bores using different techniques including artificial neural networks and the design and use of polymer bearings in microelectromechanical devices. Edited by three practitioners with a wide knowledge of the subject and the community, Metrology and Properties of Engineering Surfaces brings together leading academics and practitioners in a comprehensive and insightful treatment of the subject. The book is an essential reference work both for researchers working and teaching in the technology and for industrial users who need to be aware of current developments of the technology and new areas of application.…

Gebunden. Condición: New. Metrology and Properties of Engineering Surfaces provides in a single volume a comprehensive and authoritative treatment of the crucial topics involved in the metrology and properties of engineering surfaces. The subject matter is a central issu.

Condición: Sehr gut. Zustand: Sehr gut | Seiten: 450 | Sprache: Englisch | Produktart: Bücher | Metrology and Properties of Engineering Surfaces provides in a single volume a comprehensive and authoritative treatment of the crucial topics involved in the metrology and properties of engineering surfaces. The subject matter is a central issue in manufacturing technology, since the quality and reliability of manufactured components depend greatly upon the selection and qualities of the appropriate materials as ascertained through measurement. The book can in broad terms be split into two parts; the first deals with the metrology of engineering surfaces and covers the important issues relating to the measurement and characterization of surfaces in both two and three dimensions. This covers topics such as filtering, power spectral densities, autocorrelation functions and the use of Fractals in topography. A significant proportion is dedicated to the calibration of scanning probe microscopes using the latest techniques. The remainder of the book deals with the properties of engineering surfaces and covers a wide range of topics including hardness (measurement and relevance), surface damage and the machining of brittle surfaces, the characterization of automobile cylinder bores using different techniques including artificial neural networks and the design and use of polymer bearings in microelectromechanical devices. Edited by three practitioners with a wide knowledge of the subject and the community, Metrology and Properties of Engineering Surfaces brings together leading academics and practitioners in a comprehensive and insightful treatment of the subject. The book is an essential reference work both for researchers working and teaching in the technology and for industrial users who need to be aware of current developments of the technology and new areas of application.…

Paperback. Condición: Brand New. 476 pages. 9.00x6.00x1.08 inches. In Stock.

Condición: New. Provides a comprehensive treatment of the metrology and properties of engineering surfaces. The subject matter is a central issue in manufacturing technology, since the quality and reliability of manufactured components depends greatly upon the selection and qualities of the appropriate materials. Editor(s): Mainsah, E.; Greenwood, J.A.; Chetwynd, D. G. Series: Optoelectronics, Imaging and Sensing. Num Pages: 450 pages, biography. BIC Classification: TBMM. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 234 x 156 x 26. Weight in Grams: 840. . 1998. Hardback. . . . . Books ship from the US and Ireland.…

Hardcover. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: As New. Unread book in perfect condition.

Paperback. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: As New. Unread book in perfect condition.

Condición: New. Brand New! Fast Delivery This is an International Edition and ship within 24-48 hours. Deliver by FedEx and Dhl, & Aramex, UPS, & USPS and we do accept APO and PO BOX Addresses. Order can be delivered worldwide within 6-10 days and we do have flat rate for up to 2LB. Extra shipping charges will be requested if the Book weight is more than 5 LB. This Item May be shipped from India, United states & United Kingdom. Depending on your location and availability.…

Condición: new. Questo è un articolo print on demand.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Metrology and Properties of Engineering Surfaces provides in a single volume a comprehensive and authoritative treatment of the crucial topics involved in the metrology and properties of engineering surfaces. The subject matter is a central issue in manufacturing technology, since the quality and reliability of manufactured components depend greatly upon the selection and qualities of the appropriate materials as ascertained through measurement. The book can in broad terms be split into two parts; the first deals with the metrology of engineering surfaces and covers the important issues relating to the measurement and characterization of surfaces in both two and three dimensions. This covers topics such as filtering, power spectral densities, autocorrelation functions and the use of Fractals in topography. A significant proportion is dedicated to the calibration of scanning probe microscopes using the latest techniques. The remainder of the book deals with the properties of engineering surfaces and covers a wide range of topics including hardness (measurement and relevance), surface damage and the machining of brittle surfaces, the characterization of automobile cylinder bores using different techniques including artificial neural networks and the design and use of polymer bearings in microelectromechanical devices. Edited by three practitioners with a wide knowledge of the subject and the community, Metrology and Properties of Engineering Surfaces brings together leading academics and practitioners in a comprehensive and insightful treatment of the subject. The book is an essential reference work both for researchers working and teaching in the technology and for industrial users who need to be aware of current developments of the technology and new areas of application. 476 pp. Englisch.…

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Metrology and Properties of Engineering Surfaces provides in a single volume a comprehensive and authoritative treatment of the crucial topics involved in the metrology and properties of engineering surfaces. The subject matter is a central issu.…

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Metrology and Properties of Engineering Surfaces provides in a single volume a comprehensive and authoritative treatment of the crucial topics involved in the metrology and properties of engineering surfaces. The subject matter is a central issue in manufacturing technology, since the quality and reliability of manufactured components depend greatly upon the selection and qualities of the appropriate materials as ascertained through measurement. The book can in broad terms be split into two parts; the first deals with the metrology of engineering surfaces and covers the important issues relating to the measurement and characterization of surfaces in both two and three dimensions. This covers topics such as filtering, power spectral densities, autocorrelation functions and the use of Fractals in topography. A significant proportion is dedicated to the calibration of scanning probe microscopes using the latest techniques. The remainder of the book deals with the properties of engineering surfaces and covers a wide range of topics including hardness (measurement and relevance), surface damage and the machining of brittle surfaces, the characterization of automobile cylinder bores using different techniques including artificial neural networks and the design and use of polymer bearings in microelectromechanical devices. Edited by three practitioners with a wide knowledge of the subject and the community, Metrology and Properties of Engineering Surfaces brings together leading academics and practitioners in a comprehensive and insightful treatment of the subject. The book is an essential reference work both for researchers working and teaching in the technology and for industrial users who need to be aware of current developments of the technology and new areas of application.Springer-Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 476 pp. Englisch.…

Condición: New. PRINT ON DEMAND pp. 476.