Arrif iffa mohd (15 resultados)
Idioma: Inglés
Editorial: Springer, 2025
Serie: Libro 428 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
Librería: Brook Bookstore On Demand, Napoli, NA, ItaliaBrook Bookstore On Demand
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 46,22
Envío por EUR 6,80Se envía de Italia a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Condición: new.
High-Flexion Knee Prosthesis: Design and Finite Element Analysis (FEA)
Arrif, Iffa Mohd (Author)/ Shuib, Solehuddin (Author)/ Ghani, Amir Radzi Ab (Author)
Idioma: Inglés
Editorial: Springer, 2025
Serie: Libro 428 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 54,30
Envío por EUR 11,72Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: Brand New. 125 pages. 9.25x6.10x9.25 inches. In Stock.
Idioma: Inglés
Editorial: Springer Nature Switzerland AG, Cham, 2025
Serie: Libro 428 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
Librería: Grand Eagle Retail, Bensenville, IL, Estados Unidos de AmericaGrand Eagle Retail
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 68,06
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: new. Paperback. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to create 3D model structures using CAD software. The design modifica…tions process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Idioma: Inglés
Editorial: Springer, 2025
Serie: Libro 428 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
Librería: Brook Bookstore, Milano, MI, ItaliaBrook Bookstore
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 41,49
Envío por EUR 27,99Se envía de Italia a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Condición: new.
High-Flexion Knee Prosthesis: Design and Finite Element Analysis (FEA)
Arrif, Iffa Mohd (Author)/ Shuib, Solehuddin (Author)/ Ghani, Amir Radzi Ab (Author)
Idioma: Inglés
Editorial: Springer, 2025
Serie: Libro 428 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 78,04
Envío por EUR 11,72Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: Brand New. 125 pages. 9.25x6.10x9.25 inches. In Stock.
Idioma: Inglés
Editorial: Springer, 2025
Serie: Libro 428 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 88,83
Envío por EUR 3,50Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New.
Idioma: Inglés
Editorial: Springer Nature Switzerland AG, Cham, 2025
Serie: Libro 428 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
Librería: CitiRetail, Stevenage, Reino UnidoCitiRetail
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 56,10
Envío por EUR 43,35Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: new. Paperback. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to create 3D model structures using CAD software. The design modifica…tions process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.
- Más imágenes
Idioma: Inglés
Editorial: Springer, 2025
Serie: Libro 428 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 50,40
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. High-Flexion Knee Prosthesis | Design and Finite Element Analysis (FEA) | Iffa Mohd Arrif (u. a.) | Taschenbuch | SpringerBriefs in Applied Sciences and Technology | xxvii | Englisch | 2025 | Springer | EAN 9789819698776 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69…121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Idioma: Inglés
Editorial: Springer Nature Switzerland AG, Cham, 2025
Serie: Libro 428 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
Librería: AussieBookSeller, Truganina, VIC, AustraliaAussieBookSeller
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 98,69
Envío por EUR 32,47Se envía de Australia a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: new. Paperback. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to create 3D model structures using CAD software. The design modifica…tions process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.
Idioma: Inglés
Editorial: Springer, 2025
Serie: Libro 428 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
- Impresión bajo demanda
Librería: Basi6 International, Irving, TX, Estados Unidos de AmericaBasi6 International
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 61,79
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 10 disponibles
Condición: Brand New. New. US edition. Print on demand title. Delivery takes 20-25 days. Excellent Customer Service.
- Más imágenes
Idioma: Inglés
Editorial: Springer, Berlin, Springer, 2025
Serie: Libro 428 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 53,49
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to create… 3D model structures using CAD software. The design modifications process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation. 94 pp. Englisch.
Idioma: Inglés
Editorial: Springer, 2025
Serie: Libro 428 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 88,49
Envío por EUR 7,62Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand.
- Más imágenes
Idioma: Inglés
Editorial: Springer Verlag GmbH, 2025
Serie: Libro 428 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
- Impresión bajo demanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 48,37
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt.
Idioma: Inglés
Editorial: Springer, 2025
Serie: Libro 428 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 89,19
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND.
- Más imágenes
Idioma: Inglés
Editorial: Springer, Springer Okt 2025, 2025
Serie: Libro 428 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 53,49
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to create 3D…model structures using CAD software. The design modifications' process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 124 pp. Englisch.
