Specification cad neutral file (14 resultados)

Condición: Sehr gut. 164 p. In very good condition. ISBN: 9783540169277 Sprache: Englisch Gewicht in Gramm: 293 17,0 x 0,9 x 24,4 cm, softcover.

Condición: Sehr gut. 260 p. In very good condition. ISBN: 9783540503927 Sprache: Englisch Gewicht in Gramm: 482 17,0 x 1,5 x 24,4 cm, softcover.

Condición: New.

Kartoniert / Broschiert. Condición: New. Edited for Working Group 2 (WG 2): Bayerische Motorenwerke AG, Cisigraph, Cranfield Institute of Technology, Danmarks Tekniske Hojskole, Kernforschungszentrum Karlsruhe GmbH, NEH Consulting Engineers ApS, Universitaet KarlsruheESPRIT Project 322, CAD In.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - ESPRIT Project 322, 'CAD Interfaces', has been established to define the most important interfaces in CAD/CAM systems for data exchange, data base, finite element analysis, experimental analysis, and advanced modeling. The definitions of these interfaces are being elaborated in harmony with international standardization efforts in this field. One principal goal of the project is to develop techniques for the exchange of CAD information between CAD systems, and from the CAD domain to CAA (Computer Aided Analysis) and CAM (Computer Aided Manufacturing). This volume presents a proposal for a neutral file format for CAD data: curves, surfaces, and solids. The specification is based on a reference schema for CAD data bases and is defined informally with respect to its semantics and formally with respect to its syntax. This volume is a revised edition of 'Specification of a CAD\*I Neutral File for Solids' Version 3.2. The revision reflects the enhancements which result from the implementation of communication processors in eight different CAD systems and from the practical exchange of solid models between these systems. Due to the close interaction between the CAD\*I project and the coming-up international standard STEP this specification also serves as an introduction to the geometry model that will be included in the future international standard. …

Condición: New. pp. 260 3rd Edition, Reprint.

Condición: Good. 149 pp., ex library, else textually clean and tight, softcover. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country. Photos available upon request.…

Paperback. Condición: Brand New. 3rd enlarged edition. 257 pages. 9.61x6.69x0.59 inches. In Stock.

Paperback. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: As New. Unread book in perfect condition.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -ESPRIT Project 322, 'CAD Interfaces', has been established to define the most important interfaces in CAD/CAM systems for data exchange, data base, finite element analysis, experimental analysis, and advanced modeling. The definitions of these interfaces are being elaborated in harmony with international standardization efforts in this field. One principal goal of the project is to develop techniques for the exchange of CAD information between CAD systems, and from the CAD domain to CAA (Computer Aided Analysis) and CAM (Computer Aided Manufacturing). This volume presents a proposal for a neutral file format for CAD data: curves, surfaces, and solids. The specification is based on a reference schema for CAD data bases and is defined informally with respect to its semantics and formally with respect to its syntax. This volume is a revised edition of 'Specification of a CAD\*I Neutral File for Solids' Version 3.2. The revision reflects the enhancements which result from the implementation of communication processors in eight different CAD systems and from the practical exchange of solid models between these systems. Due to the close interaction between the CAD\*I project and the coming-up international standard STEP this specification also serves as an introduction to the geometry model that will be included in the future international standard. 260 pp. Englisch.…

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -ESPRIT Project 322, 'CAD Interfaces', has been established to define the most important interfaces in CAD/CAM systems for data exchange, data base, finite element analysis, experimental analysis, and advanced modeling. The definitions of these interfaces are being elaborated in harmony with international standardization efforts in this field. One principal goal of the project is to develop techniques for the exchange of CAD information between CAD systems, and from the CAD domain to CAA (Computer Aided Analysis) and CAM (Computer Aided Manufacturing). This volume presents a proposal for a neutral file format for CAD data: curves, surfaces, and solids. The specification is based on a reference schema for CAD data bases and is defined informally with respect to its semantics and formally with respect to its syntax. This volume is a revised edition of 'Specification of a CAD\*I Neutral File for Solids' Version 3.2. The revision reflects the enhancements which result from the implementation of communication processors in eight different CAD systems and from the practical exchange of solid models between these systems. Due to the close interaction between the CAD\*I project and the coming-up international standard STEP this specification also serves as an introduction to the geometry model that will be included in the future international standard.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 260 pp. Englisch.…

Condición: New. Print on Demand pp. 260 67:B&W 6.69 x 9.61 in or 244 x 170 mm (Pinched Crown) Perfect Bound on White w/Gloss Lam.

Condición: New. PRINT ON DEMAND pp. 260.