Near net shape manufacturing (40 resultados)

Condición: New.

Condición: New. In English.

Condición: New. In English.

Condición: As New. Unread book in perfect condition.

Condición: New.

Condición: New.

Condición: New. In English.

Condición: New.

Condición: As New. Unread book in perfect condition.

Paperback. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: New. pp. 148.

Condición: New.

Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This work describes an experimental investigation with the aim to evaluate and establish wire spark erosion machining (WSEM) as a viable alternative for high quality miniature gear manufacturing. External spur type miniature brass (ASTM 858) gears with 12 teeth, 9.8 mm outside diameter and 5 mm face width were manufactured by WSEM. The research work was accomplished in four distinct experimental stages viz., preliminary, pilot, main and confirmation. The aim, scope and findings of each stage are progressively presented and discussed. In essence, the investigation found that it was possible to manufacture miniature gears to high quality by using WSEM. Gears up to DIN 5 quality with a good surface finish (1.2 µm average roughness) and satisfactory surface integrity were achieved. The results suggest that WSEM should be considered a viable alternative to conventional miniature gear manufacturing techniques and that in some instances it may even be superior. This work will prove useful toresearchers and professionals in the field of miniature and micro-scale manufacturing and machining.…

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This work describes an experimental investigation with the aim to evaluate and establish wire spark erosion machining (WSEM) as a viable alternative for high quality miniature gear manufacturing. External spur type miniature brass (ASTM 858) gears with 12 teeth, 9.8 mm outside diameter and 5 mm face width were manufactured by WSEM. The research work was accomplished in four distinct experimental stages viz., preliminary, pilot, main and confirmation. The aim, scope and findings of each stage are progressively presented and discussed. In essence, the investigation found that it was possible to manufacture miniature gears to high quality by using WSEM. Gears up to DIN 5 quality with a good surface finish (1.2 µm average roughness) and satisfactory surface integrity were achieved. The results suggest that WSEM should be considered a viable alternative to conventional miniature gear manufacturing techniques and that in some instances it may even be superior. This work will prove useful toresearchers and professionals in the field of miniature and micro-scale manufacturing and machining.…

Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book covers themechanism, salient features, and important aspects of various subtractive, additive, forming and hybrid techniques to manufacture near net-shaped products. The latest research in this area as well as possible future research are also highlighted.…

Hardcover. Condición: Brand New. 200 pages. 9.25x6.10x0.67 inches. In Stock.

Taschenbuch. Condición: Neu. Near-Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining | Kapil Gupta (u. a.) | Taschenbuch | Materials Forming, Machining and Tribology | xiii | Englisch | 2018 | Springer | EAN 9789811093876 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Condición: New.

Paperback. Condición: Brand New. reprint edition. 135 pages. 9.25x6.10x0.35 inches. In Stock.

Condición: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | This work describes an experimental investigation with the aim to evaluate and establish wire spark erosion machining (WSEM) as a viable alternative for high quality miniature gear manufacturing. External spur type miniature brass (ASTM 858) gears with 12 teeth, 9.8 mm outside diameter and 5 mm face width were manufactured by WSEM. The research work was accomplished in four distinct experimental stages viz., preliminary, pilot, main and confirmation. The aim, scope and findings of each stage are progressively presented and discussed. In essence, the investigation found that it was possible to manufacture miniature gears to high quality by using WSEM. Gears up to DIN 5 quality with a good surface finish (1.2 µm average roughness) and satisfactory surface integrity were achieved. The results suggest that WSEM should be considered a viable alternative to conventional miniature gear manufacturing techniques and that in some instances it may even be superior. This work will prove useful toresearchers and professionals in the field of miniature and micro-scale manufacturing and machining.…

Hardcover. Condición: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Paperback. Condición: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: New. pp. 94.

paperback. Condición: New. Language:Chinese.Paperback. Pub Date: 2020-11-01 Pages: 312 Publisher: Metallurgical Industry Press This book is based on explaining the concept. classification and characteristics of near-net-shape manufacturing technology and the progress of hot-rolled strip near-net-shape manufacturing technology. Thin slab continuous casting and rolling technology and thin strip continuous casting and rolling technology are analyzed in detail and introduced the current status. principle. technology. techn.…

Condición: new. Questo è un articolo print on demand.

Buch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book covers themechanism, salient features, and important aspects of various subtractive, additive, forming and hybrid techniques to manufacture near net-shaped products. The latest research in this area as well as possible future research are also highlighted. 200 pp. Englisch.…

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This work describes an experimental investigation with the aim to evaluate and establish wire spark erosion machining (WSEM) as a viable alternative for high quality miniature gear manufacturing. External spur type miniature brass (ASTM 858) gears with 12 teeth, 9.8 mm outside diameter and 5 mm face width were manufactured by WSEM. The research work was accomplished in four distinct experimental stages viz., preliminary, pilot, main and confirmation. The aim, scope and findings of each stage are progressively presented and discussed. In essence, the investigation found that it was possible to manufacture miniature gears to high quality by using WSEM. Gears up to DIN 5 quality with a good surface finish (1.2 µm average roughness) and satisfactory surface integrity were achieved. The results suggest that WSEM should be considered a viable alternative to conventional miniature gear manufacturing techniques and that in some instances it may even be superior. This work will prove useful to researchers and professionals in the field of miniature and micro-scale manufacturing and machining. 152 pp. Englisch. …

Buch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This work describes an experimental investigation with the aim to evaluate and establish wire spark erosion machining (WSEM) as a viable alternative for high quality miniature gear manufacturing. External spur type miniature brass (ASTM 858) gears with 12 teeth, 9.8 mm outside diameter and 5 mm face width were manufactured by WSEM. The research work was accomplished in four distinct experimental stages viz., preliminary, pilot, main and confirmation. The aim, scope and findings of each stage are progressively presented and discussed. In essence, the investigation found that it was possible to manufacture miniature gears to high quality by using WSEM. Gears up to DIN 5 quality with a good surface finish (1.2 µm average roughness) and satisfactory surface integrity were achieved. The results suggest that WSEM should be considered a viable alternative to conventional miniature gear manufacturing techniques and that in some instances it may even be superior. This work will prove useful to researchers and professionals in the field of miniature and micro-scale manufacturing and machining. 152 pp. Englisch.…

Gebunden. Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. First book dedicated to near net shape manufacturingCovers a variety of near net shape manufacturing processesLists the recent developments, tools and techniques in the fieldDr. Kapil Gup. …

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Covers near about every aspect i.e. quality, cost and competitiveness of miniature gear manufacturing using the wire spark erosion methodPresents quality aspects of gears and WSEM effects with the help of sketchesProvides highly relevant inform.…