Developments injection moulding (37 resultados)

- Tapa dura
Librería: BoundlessBookstore, Wallingford, Reino UnidoBoundlessBookstore
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Aceptable
EUR 8,32
Envío por EUR 8,06Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. Condición: Good. Light wear to boards. Content is clean with slilght age tone. Good DJ with light wear.
Editorial: Aachen 1988
- Tapa blanda
Librería: Wissenschaftliches Antiquariat Köln Dr. Sebastian Peters UG, Köln, AlemaniaWissenschaftliches Antiquariat Köln Dr. Sebastian Peters UG
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 17,00
Envío por EUR 10,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Añadir al carritoBroschur. Condición: gut. 127, A 12 S. : Ill., graph. Darst. ; 21 cm, Aufkleber, Bibliotheksexemplar, Dreieckstasche. Sprache: deu.

- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 60,39
Envío por EUR 13,83Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.

- Tapa blanda
Librería: Books Puddle, New York, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 78,32
Envío por EUR 3,42Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 340.

- Tapa dura
Librería: Zubal-Books, Since 1961, Cleveland, Estados Unidos de AmericaZubal-Books, Since 1961
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Aceptable
EUR 78,68
Envío por EUR 3,86Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: Good. *Price HAS BEEN REDUCED by 10% until Monday, June 1 (weekend SALE item)* 324 pp., hardcover, ex library, else text clean & binding tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional… duties, taxes, or fees required by recipient's country.

Neue Entwicklungen für die Simulation des Spritzgiessprozesses von Thermoplasten = new developments for the simulation of the injection moulding process of thermoplastics
Filz, Paul-Ferdinand und (Hrsg.) Institut für Kunststoffverarbeitung (IKV), TH Aachen:
Editorial: Aachen : IKV TH Aachen 1988
- Tapa blanda
Librería: Roland Antiquariat UG haftungsbeschränkt, Weinheim, AlemaniaRoland Antiquariat UG haftungsbeschränkt
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado
EUR 18,00
Envío por EUR 42,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Añadir al carritoSoftcover. 127, A 12 S. : Ill., graph. Darst. ; 21 cm Guter Zustand. Leseseiten sind sauber und ohne Markierungen. Ausgeschiedenes Bibliotheksexemplar mit entsprechender Kennzeichnung. Buch weist leichte Lager- bzw. Gebrauchsspuren auf. Sonst ordentliches Exemplar. Altersfreigabe FSK ab 0 Jahre Sprache: Deutsch Gewicht in Gramm:… 1000.

- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 59,97
Envío por EUR 62,47Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - In the field of polymer technology, injection moulding is the most important moulding process. Because of the size of that industry and the rate of development which it attracts, it is impossible to present, in a single reasonably sized volume, all… of the developments that have taken place in recent years. The purpose of this book is therefore to present selected topics which contribute to, or exemplify, develop ments in this important area. Each year considerable development takes place in the area of machine and process control and these developments receive con siderable publicity in the trade press. Another area which advances at the same pace, but which seems to receive far less publicity, although it is equally important, is the area of mould design and manufacture. It is important because profitability is dependent upon the design, manufacture and operation of the mould. It is for this reason that several chapters relating to mould design have been included in this, the third volume in this series. The topics covered include advances in mould manufacture, the use of runnerless systems to aid productivity, and others showing how the applications of computers can greatly assist the moulder to obtain a more productive unit.

- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 115,17
Envío por EUR 13,83Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.

- Tapa blanda
Librería: Books Puddle, New York, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 133,09
Envío por EUR 3,42Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 300.

- Tapa blanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 92,27
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.

- Tapa blanda
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 151,27
Envío por EUR 11,54Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: Brand New. 300 pages. 8.50x5.51x0.68 inches. In Stock.

- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 112,77
Envío por EUR 61,90Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Injection moulding is the most important moulding process used by the plastics industry and some idea of its importance can be obtained by considering the following figures. The value of the UK market for plastics processing equipment was Pds. 60 m…illion in 1977. Of this sum, Pds. 23 million was spent on injection moulding machines, that is, 40 % of all the money spent on plastics processing equipment in the UK. It has been estimated that one-third of all plastics materials are processed by injection moulding. At the present time the process is of greater importance to the thermoplastics industry but its relevance to the thermoset industry should not be ignored. Most ofthe equipment now used is based on single-screw pre-plasticising units. Once these machines had become established, in the 1960s, it was felt that the ultimate had been reached in machine design and utilisation. However, since that time, machines, processes and materials have undergone extensive development to make injection moulding safer, more reliable, easier to use and more economical to operate. The purpose ofthis book is to review some of the developments that have taken place in this very important area. These developments are described by specialists in the field, who have extensive industrial experience and whose contribution will therefore be of immediate relevance to those concerned with the usage and application of this, the most important plastics moulding process.

- Tapa dura
Librería: Better World Books Ltd, Dunfermline, Reino UnidoBetter World Books Ltd
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 189,92
Envío por EUR 5,77Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: Very Good. Former library copy. Pages intact with possible writing/highlighting. Binding strong with minor wear. Dust jackets/supplements may not be included. Includes library markings. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.

- Tapa dura
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 216,77
Envío por EUR 17,31Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.

- Tapa dura
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 224,73
Envío por EUR 13,83Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.

- Tapa dura
Librería: GreatBookPrices, Columbia, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 239,15
Envío por EUR 2,26Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.

- Tapa dura
Librería: GreatBookPrices, Columbia, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 240,00
Envío por EUR 2,26Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: As New. Unread book in perfect condition.

- Tapa dura
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 246,55
Envío por EUR 17,31Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: As New. Unread book in perfect condition.

- Tapa dura
Librería: Books Puddle, New York, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 275,22
Envío por EUR 3,42Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 364.

- Tapa dura
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 223,11
Envío por EUR 63,56Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering.

- Tapa blanda
- Impresión bajo demanda
Librería: Brook Bookstore On Demand, Napoli, ItaliaBrook Bookstore On Demand
Contactar con el vendedorVendedor de 3 estrellasCondición: Nuevo
EUR 46,22
Envío por EUR 5,50Se envía de Italia a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: new. Questo è un articolo print on demand.

- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 53,49
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In the field of polymer technology, injection moulding is the most important moulding process. Because of the size of that industry and the rate of development which it attracts, it is impossible to present, in a single reasonably s…ized volume, all of the developments that have taken place in recent years. The purpose of this book is therefore to present selected topics which contribute to, or exemplify, develop ments in this important area. Each year considerable development takes place in the area of machine and process control and these developments receive con siderable publicity in the trade press. Another area which advances at the same pace, but which seems to receive far less publicity, although it is equally important, is the area of mould design and manufacture. It is important because profitability is dependent upon the design, manufacture and operation of the mould. It is for this reason that several chapters relating to mould design have been included in this, the third volume in this series. The topics covered include advances in mould manufacture, the use of runnerless systems to aid productivity, and others showing how the applications of computers can greatly assist the moulder to obtain a more productive unit. 340 pp. Englisch.

- Tapa blanda
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 77,81
Envío por EUR 7,50Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand pp. 340 23:B&W 6 x 9 in or 229 x 152 mm Perfect Bound on White w/Gloss Lam.

- Tapa blanda
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 78,77
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND pp. 340.

- Tapa blanda
- Impresión bajo demanda
Librería: Brook Bookstore On Demand, Napoli, ItaliaBrook Bookstore On Demand
Contactar con el vendedorVendedor de 3 estrellasCondición: Nuevo
EUR 86,24
Envío por EUR 5,50Se envía de Italia a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: new. Questo è un articolo print on demand.

- Tapa blanda
- Impresión bajo demanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 48,37
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. In the field of polymer technology, injection moulding is the most important moulding process. Because of the size of that industry and the rate of development which it attracts, it is impossible to present, in a sing…le reasonably sized volume, all of the d.

- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 85,55
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Injection moulding is the most important moulding process used by the plastics industry and some idea of its importance can be obtained by considering the following figures. The value of the UK market for plastics processing equipme…nt was Pds. 60 million in 1977. Of this sum, Pds. 23 million was spent on injection moulding machines, that is, 40 % of all the money spent on plastics processing equipment in the UK. It has been estimated that one-third of all plastics materials are processed by injection moulding. At the present time the process is of greater importance to the thermoplastics industry but its relevance to the thermoset industry should not be ignored. Most ofthe equipment now used is based on single-screw pre-plasticising units. Once these machines had become established, in the 1960s, it was felt that the ultimate had been reached in machine design and utilisation. However, since that time, machines, processes and materials have undergone extensive development to make injection moulding safer, more reliable, easier to use and more economical to operate. The purpose ofthis book is to review some of the developments that have taken place in this very important area. These developments are described by specialists in the field, who have extensive industrial experience and whose contribution will therefore be of immediate relevance to those concerned with the usage and application of this, the most important plastics moulding process. 300 pp. Englisch.

- Tapa blanda
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 53,49
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In the field of polymer technology, injection moulding is the most important moulding process. Because of the size of that industry and the rate of development which it attracts, it is impossible to present, in a single reasonably sized… volume, all of the developments that have taken place in recent years. The purpose of this book is therefore to present selected topics which contribute to, or exemplify, develop ments in this important area. Each year considerable development takes place in the area of machine and process control and these developments receive con siderable publicity in the trade press. Another area which advances at the same pace, but which seems to receive far less publicity, although it is equally important, is the area of mould design and manufacture. It is important because profitability is dependent upon the design, manufacture and operation of the mould. It is for this reason that several chapters relating to mould design have been included in this, the third volume in this series. The topics covered include advances in mould manufacture, the use of runnerless systems to aid productivity, and others showing how the applications of computers can greatly assist the moulder to obtain a more productive unit.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 340 pp. Englisch.

- Tapa blanda
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 135,05
Envío por EUR 7,50Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand pp. 300 22:B&W 5.5 x 8.5 in or 216 x 140 mm (Demy 8vo) Perfect Bound on White w/Gloss Lam.

- Tapa blanda
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 137,68
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND pp. 300.