9789811382833 - a practical guide to design for additive manufacturing (springer series in advanced manufacturing) de diegel, olaf; nordin, axel; motte, damien (27 resultados)
Idioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Aceptable
EUR 148,98
Envío por EUR 2,32Se envía dentro de Estados Unidos de AmericaCantidad disponible: 2 disponibles
Condición: good. May show signs of wear, highlighting, writing, and previous use. This item may be a former library book with typical markings. No guarantee on products that contain supplements Your satisfaction is 100% guaranteed. Twenty-five year bookseller with shipments to over fifty million happy customers.
Idioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: Textbooks_Source, Columbia, MO, Estados Unidos de AmericaTextbooks_Source
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 147,76
Envío por EUR 3,51Se envía dentro de Estados Unidos de AmericaCantidad disponible: 5 disponibles
paperback. Condición: New. 1st ed. 2019. Ships in a BOX from Central Missouri! UPS shipping for most packages, (Priority Mail for AK/HI/APO/PO Boxes).
Idioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: Textbooks_Source, Columbia, MO, Estados Unidos de AmericaTextbooks_Source
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Aceptable
EUR 147,76
Envío por EUR 3,51Se envía dentro de Estados Unidos de AmericaCantidad disponible: 2 disponibles
paperback. Condición: Good. 1st ed. 2019. Ships in a BOX from Central Missouri! May not include working access code. Will not include dust jacket. Has used sticker(s) and some writing or highlighting. UPS shipping for most packages, (Priority Mail for AK/HI/APO/PO Boxes).
Idioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 158,55
Envío por EUR 17,41Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Condición: New.
Idioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 164,80
Envío por EUR 13,91Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
Idioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 181,66
Envío por EUR 2,32Se envía dentro de Estados Unidos de AmericaCantidad disponible: 5 disponibles
Condición: New.
Idioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 182,00
Envío por EUR 2,32Se envía dentro de Estados Unidos de AmericaCantidad disponible: 5 disponibles
Condición: As New. Unread book in perfect condition.
Idioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 182,17
Envío por EUR 17,41Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Condición: As New. Unread book in perfect condition.
Idioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
- Primera edición
Librería: ECOSPHERE, Champs sur marne, FranciaECOSPHERE
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 128,00
Envío por EUR 65,00Se envía de Francia a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Couverture souple. Condición: Neuf. Edition originale.
Idioma: Inglés
Editorial: Springer Verlag, Singapore, SG 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: Rarewaves.com USA, London, LONDO, Reino UnidoRarewaves.com USA
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 203,61
Gastos de envío gratisSe envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Paperback. Condición: New. 2019 ed.
Idioma: Inglés
Editorial: Springer Verlag, Singapore, Singapore 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: Grand Eagle Retail, Bensenville, IL, Estados Unidos de AmericaGrand Eagle Retail
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 209,32
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: new. Paperback. This book provides a wealth of practical guidance on how to design parts to gain the maximum benefit from what additive manufacturing (AM) can offer. It begins by describing the main AM technologies and their respective advantages and disadvantages. It then examines strategic considerations…in the context of designing for additive manufacturing (DfAM), such as designing to avoid anisotropy, designing to minimize print time, and post-processing, before discussing the economics of AM. The following chapters dive deeper into computational tools for design analysis and the optimization of AM parts, part consolidation, and tooling applications. They are followed by an in-depth chapter on designing for polymer AM and applicable design guidelines, and a chapter on designing for metal AM and its corresponding design guidelines. These chapters also address health and safety, certification and quality aspects. A dedicated chapter covers the multiple post-processing methods for AM, offering the reader practical guidance on how to get their parts from the AM machine into a shape that is ready to use. The books final chapter outlines future applications of AM.The main benefit of the book is its highly practical approach: it provides directly applicable, hands-on information and insights to help readers adopt AM in their industry This book provides a wealth of practical guidance on how to design parts to gain the maximum benefit from what additive manufacturing (AM) can offer. They are followed by an in-depth chapter on designing for polymer AM and applicable design guidelines, and a chapter on designing for metal AM and its corresponding design guidelines. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Idioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Aceptable
EUR 220,07
Envío por EUR 17,41Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Condición: good. May show signs of wear, highlighting, writing, and previous use. This item may be a former library book with typical markings. No guarantee on products that contain supplements Your satisfaction is 100% guaranteed. Twenty-five year bookseller with shipments to over fifty million happy customers.
Idioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 240,46
Envío por EUR 3,51Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New. pp. 248.
Idioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 256,29
Envío por EUR 7,54Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New. pp. 248.
Más imágenesIdioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 184,85
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. A Practical Guide to Design for Additive Manufacturing | Olaf Diegel (u. a.) | Taschenbuch | Springer Series in Advanced Manufacturing | xx | Englisch | 2020 | Springer | EAN 9789811382833 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hart…mann[at]springer[dot]com | Anbieter: preigu.
Más imágenesIdioma: Inglés
Editorial: Springer Verlag, Singapore, SG 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: Rarewaves.com UK, London, Reino UnidoRarewaves.com UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 192,51
Envío por EUR 75,45Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Paperback. Condición: New. 2019 ed.
Idioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: Kennys Bookshop and Art Galleries Ltd., Galway, GY, IrlandaKennys Bookshop and Art Galleries Ltd.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 251,76
Envío por EUR 10,50Se envía de Irlanda a Estados Unidos de AmericaCantidad disponible: 15 disponibles
Condición: New.
Idioma: Inglés
Editorial: Springer, Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 221,53
Envío por EUR 61,91Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book provides a wealth of practical guidance on how to design parts to gain the maximum benefit from what additive manufacturing (AM) can offer. It begins by describing the main AM technologies and their respective advantages and disadvantages…. It then examines strategic considerations in the context of designing for additive manufacturing (DfAM), such as designing to avoid anisotropy, designing to minimize print time, and post-processing, before discussing the economics of AM. The following chapters dive deeper into computational tools for design analysis and the optimization of AM parts, part consolidation, and tooling applications. They are followed by an in-depth chapter on designing for polymer AM and applicable design guidelines, and a chapter on designing for metal AM and its corresponding design guidelines. These chapters also address health and safety, certification and quality aspects. A dedicated chapter covers the multiple post-processing methods for AM, offering the reader practical guidance on how to get their parts from the AM machine into a shape that is ready to use. The book's final chapter outlines future applications of AM. The main benefit of the book is its highly practical approach: it provides directly applicable, 'hands-on' information and insights to help readers adopt AM in their industry.
Idioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 266,60
Envío por EUR 29,02Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: New. New. book.
Idioma: Inglés
Editorial: Springer Nature 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 305,50
Envío por EUR 11,61Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: Brand New. 248 pages. 9.25x6.10x0.59 inches. In Stock.
Idioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: Kennys Bookstore, Olney, MD, Estados Unidos de AmericaKennys Bookstore
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 321,52
Envío por EUR 9,24Se envía dentro de Estados Unidos de AmericaCantidad disponible: 15 disponibles
Condición: New.
Idioma: Inglés
Editorial: Springer Verlag, Singapore, Singapore 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
Librería: AussieBookSeller, Truganina, VIC, AustraliaAussieBookSeller
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 299,23
Envío por EUR 32,57Se envía de Australia a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: new. Paperback. This book provides a wealth of practical guidance on how to design parts to gain the maximum benefit from what additive manufacturing (AM) can offer. It begins by describing the main AM technologies and their respective advantages and disadvantages. It then examines strategic considerations…in the context of designing for additive manufacturing (DfAM), such as designing to avoid anisotropy, designing to minimize print time, and post-processing, before discussing the economics of AM. The following chapters dive deeper into computational tools for design analysis and the optimization of AM parts, part consolidation, and tooling applications. They are followed by an in-depth chapter on designing for polymer AM and applicable design guidelines, and a chapter on designing for metal AM and its corresponding design guidelines. These chapters also address health and safety, certification and quality aspects. A dedicated chapter covers the multiple post-processing methods for AM, offering the reader practical guidance on how to get their parts from the AM machine into a shape that is ready to use. The books final chapter outlines future applications of AM.The main benefit of the book is its highly practical approach: it provides directly applicable, hands-on information and insights to help readers adopt AM in their industry This book provides a wealth of practical guidance on how to design parts to gain the maximum benefit from what additive manufacturing (AM) can offer. They are followed by an in-depth chapter on designing for polymer AM and applicable design guidelines, and a chapter on designing for metal AM and its corresponding design guidelines. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.
Idioma: Inglés
Editorial: Springer Nature 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
- Impresión bajo demanda
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 191,27
Envío por EUR 11,61Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: Brand New. 248 pages. 9.25x6.10x0.59 inches. In Stock. This item is printed on demand.
Idioma: Inglés
Editorial: Springer Singapore 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
- Impresión bajo demanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 180,07
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Includes numerous practical examples on how to design components to be suitable for additive manufacturing Provides in-depth coverage not only of the printing processes themselves, but also of the many post-processing… techniques that must be used .
Idioma: Inglés
Editorial: Springer, Springer Aug 2020 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 213,99
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book provides a wealth of practical guidance on how to design parts to gain the maximum benefit from what additive manufacturing (AM) can offer. It begins by describing the main AM technologies and their respective advantages a…nd disadvantages. It then examines strategic considerations in the context of designing for additive manufacturing (DfAM), such as designing to avoid anisotropy, designing to minimize print time, and post-processing, before discussing the economics of AM. The following chapters dive deeper into computational tools for design analysis and the optimization of AM parts, part consolidation, and tooling applications. They are followed by an in-depth chapter on designing for polymer AM and applicable design guidelines, and a chapter on designing for metal AM and its corresponding design guidelines. These chapters also address health and safety, certification and quality aspects. A dedicated chapter covers the multiple post-processing methods for AM, offering the reader practical guidance on how to get their parts from the AM machine into a shape that is ready to use. The book's final chapter outlines future applications of AM. The main benefit of the book is its highly practical approach: it provides directly applicable, 'hands-on' information and insights to help readers adopt AM in their industry 248 pp. Englisch.
Idioma: Inglés
Editorial: Springer, Springer Aug 2020 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 213,99
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book provides a wealth of practical guidance on how to design parts to gain the maximum benefit from what additive manufacturing (AM) can offer. It begins by describing the main AM technologies and their respective advantages and d…isadvantages. It then examines strategic considerations in the context of designing for additive manufacturing (DfAM), such as designing to avoid anisotropy, designing to minimize print time, and post-processing, before discussing the economics of AM.The following chapters dive deeper into computational tools for design analysis and the optimization of AM parts, part consolidation, and tooling applications. They are followed by an in-depth chapter on designing for polymer AM and applicable design guidelines, and a chapter on designing for metal AM and its corresponding design guidelines. These chapters also address health and safety, certification and quality aspects. A dedicated chapter covers the multiple post-processing methods for AM, offering the reader practical guidance on how to get their parts from the AM machine into a shape that is ready to use. The book¿s final chapter outlines future applications of AM.The main benefit of the book is its highly practical approach: it provides directly applicable, ¿hands-on¿ information and insights to help readers adopt AM in their industrySpringer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 248 pp. Englisch.
Idioma: Inglés
Editorial: Springer 2020
Serie: Springer Series in Advanced Manufacturing, Libro 52 de 74. Libro 52 de 74 - Springer Series in Advanced Manufacturing
- Tapa blanda
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 293,63
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND pp. 248.
