9786202017459 - Aerodynamic and Thermal Design of Centrifugal Compressor de Shah, Samkit; Keshwani, Mukesh; Vyas, Bipin (5 resultados)

Paperback. Condición: Brand New. 140 pages. 8.66x5.91x0.32 inches. In Stock.

Taschenbuch. Condición: Neu. Aerodynamic and Thermal Design of Centrifugal Compressor | Samkit Shah (u. a.) | Taschenbuch | 140 S. | Englisch | 2017 | LAP LAMBERT Academic Publishing | EAN 9786202017459 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Shah SamkitSamkit Shah is served as Research Assistant in Sankalp Rasayan Gorjiwala Industrial Estate Surat,India. He received the B.E. degree in Mechanical Engg from C.K.Pithawalla College, Surat, India. He has completed his Master.

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In the present study, a 3D numerical simulation of a non-dimensional design of impeller, diffuser and volute design of centrifugal compressor in dimensional form is carried out by using the commercial code of ANSYS R15.0. The fully 3D, Compressible and Steady flow analysis of the fluid (air) flow were solved in CFX solver. A SST k-v turbulent model was used for a simulation of the on-design performance of the single speed centrifugal compressor. By using this specific design results show that De-Haller number, non-dimensional mass flow rate, nondimensional ratio of axial length to exit diameter, divergence angle of Diffuser, area ratio from diffuser outlet to volute outlet obtained in order to 0.7, 0.092, 0.33, 7.29 and 0.65 respectively. Also, found that All Mach number are below 1 so there are no shock formations. The mass flow rate is less than chocking mass flow rate at the throat of impeller and diffuser so there is no choking of flow In order to verify the present numerical simulations, the model results were validated with the analytical method gives the good agreement but not exactly due to design losses were neglected.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 140 pp. Englisch.

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - In the present study, a 3D numerical simulation of a non-dimensional design of impeller, diffuser and volute design of centrifugal compressor in dimensional form is carried out by using the commercial code of ANSYS R15.0. The fully 3D, Compressible and Steady flow analysis of the fluid (air) flow were solved in CFX solver. A SST k-v turbulent model was used for a simulation of the on-design performance of the single speed centrifugal compressor. By using this specific design results show that De-Haller number, non-dimensional mass flow rate, nondimensional ratio of axial length to exit diameter, divergence angle of Diffuser, area ratio from diffuser outlet to volute outlet obtained in order to 0.7, 0.092, 0.33, 7.29 and 0.65 respectively. Also, found that All Mach number are below 1 so there are no shock formations. The mass flow rate is less than chocking mass flow rate at the throat of impeller and diffuser so there is no choking of flow In order to verify the present numerical simulations, the model results were validated with the analytical method gives the good agreement but not exactly due to design losses were neglected.