9786139831081 - laser processing of biocompatible polymers for development of mems de atanasov, petar; stankova, nadya; armyanov, stephan (7 resultados)
- Tapa blanda
Librería: Books Puddle, New York, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 58,11
Envío por EUR 3,43Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New.
- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 33,20
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Laser processing of biocompatible polymers for development of mems | Petar Atanasov (u. a.) | Taschenbuch | 52 S. | Englisch | 2018 | LAP LAMBERT Academic Publishing | EAN 9786139831081 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de…| Anbieter: preigu.
- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 35,90
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Medical grade PDMS elastomer is a widely used biomaterial in medicine and for production of high-tech devices - MEMS and NEMS. Results on experimental study of the PDMS-elastomer processing by fs-, ps- and ns-lasers, working in UV,…VIS and NIR regions of the spectra are presented. Different processing parameters as pulse duration, fluency, scanning speed, and overlapping of the subsequent pulses are varied in order to activate and change the surface morphology. High definition trenches are produced. Analyses by 3D Color Laser and Optical Microscope, XRD, SEM, XPS, and mi-Raman are accomplished in order to get information about the structural morphology and alteration of the chemical composition of the ablated traces. Optical properties of the processed material are specially studied and evaluated. Finally, attempts for successful metallization by Pt or Ni via electro less plating of the trenches produced are accomplished. The metallization process is not sensitive to the time interval after the laser treatment. The results are very promising and confirm the expectation to use such a laser-based technology and metallization for micro- or nano-fabrication of hi-tech devices. 52 pp. Englisch.
- Tapa blanda
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 56,26
Envío por EUR 7,52Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand.
- Tapa blanda
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 57,52
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND.
- Tapa blanda
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 35,90
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Medical grade PDMS elastomer is a widely used biomaterial in medicine and for production of high-tech devices - MEMS and NEMS. Results on experimental study of the PDMS-elastomer processing by fs-, ps- and ns-lasers, working in UV, VIS…and NIR regions of the spectra are presented. Different processing parameters as pulse duration, fluency, scanning speed, and overlapping of the subsequent pulses are varied in order to activate and change the surface morphology. High definition trenches are produced. Analyses by 3D Color Laser and Optical Microscope, XRD, SEM, XPS, and ¿-Raman are accomplished in order to get information about the structural morphology and alteration of the chemical composition of the ablated traces. Optical properties of the processed material are specially studied and evaluated. Finally, attempts for successful metallization by Pt or Ni via electro less plating of the trenches produced are accomplished. The metallization process is not sensitive to the time interval after the laser treatment. The results are very promising and confirm the expectation to use such a laser-based technology and metallization for micro- or nano-fabrication of hi-tech devices.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 52 pp. Englisch.
- Tapa blanda
- Impresión bajo demanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 37,20
Envío por EUR 60,48Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Medical grade PDMS elastomer is a widely used biomaterial in medicine and for production of high-tech devices - MEMS and NEMS. Results on experimental study of the PDMS-elastomer processing by fs-, ps- and ns-lasers, working in UV, VIS a…nd NIR regions of the spectra are presented. Different processing parameters as pulse duration, fluency, scanning speed, and overlapping of the subsequent pulses are varied in order to activate and change the surface morphology. High definition trenches are produced. Analyses by 3D Color Laser and Optical Microscope, XRD, SEM, XPS, and mi-Raman are accomplished in order to get information about the structural morphology and alteration of the chemical composition of the ablated traces. Optical properties of the processed material are specially studied and evaluated. Finally, attempts for successful metallization by Pt or Ni via electro less plating of the trenches produced are accomplished. The metallization process is not sensitive to the time interval after the laser treatment. The results are very promising and confirm the expectation to use such a laser-based technology and metallization for micro- or nano-fabrication of hi-tech devices.
