Artículos relacionados a Laser processing of biocompatible polymers for development...

Laser processing of biocompatible polymers for development of mems - Tapa blanda

 
9786139831081: Laser processing of biocompatible polymers for development of mems

Sinopsis

Medical grade PDMS elastomer is a widely used biomaterial in medicine and for production of high-tech devices - MEMS and NEMS. Results on experimental study of the PDMS-elastomer processing by fs-, ps- and ns-lasers, working in UV, VIS and NIR regions of the spectra are presented. Different processing parameters as pulse duration, fluency, scanning speed, and overlapping of the subsequent pulses are varied in order to activate and change the surface morphology. High definition trenches are produced. Analyses by 3D Color Laser and Optical Microscope, XRD, SEM, XPS, and μ-Raman are accomplished in order to get information about the structural morphology and alteration of the chemical composition of the ablated traces. Optical properties of the processed material are specially studied and evaluated. Finally, attempts for successful metallization by Pt or Ni via electro less plating of the trenches produced are accomplished. The metallization process is not sensitive to the time interval after the laser treatment. The results are very promising and confirm the expectation to use such a laser-based technology and metallization for micro- or nano-fabrication of hi-tech devices.

"Sinopsis" puede pertenecer a otra edición de este libro.

Comprar nuevo

Ver este artículo

EUR 3,40 gastos de envío en Estados Unidos de America

Destinos, gastos y plazos de envío

Resultados de la búsqueda para Laser processing of biocompatible polymers for development...

Imagen de archivo

Petar Atanasov
Publicado por LAP Lambert Academic Publishing, 2018
ISBN 10: 6139831083 ISBN 13: 9786139831081
Nuevo Tapa blanda

Librería: Books Puddle, New York, NY, Estados Unidos de America

Calificación del vendedor: 4 de 5 estrellas Valoración 4 estrellas, Más información sobre las valoraciones de los vendedores

Condición: New. Nº de ref. del artículo: 26386212187

Contactar al vendedor

Comprar nuevo

EUR 48,59
Convertir moneda
Gastos de envío: EUR 3,40
A Estados Unidos de America
Destinos, gastos y plazos de envío

Cantidad disponible: 4 disponibles

Añadir al carrito

Imagen de archivo

Petar Atanasov
Publicado por LAP Lambert Academic Publishing, 2018
ISBN 10: 6139831083 ISBN 13: 9786139831081
Nuevo Tapa blanda
Impresión bajo demanda

Librería: Majestic Books, Hounslow, Reino Unido

Calificación del vendedor: 5 de 5 estrellas Valoración 5 estrellas, Más información sobre las valoraciones de los vendedores

Condición: New. Print on Demand. Nº de ref. del artículo: 393387652

Contactar al vendedor

Comprar nuevo

EUR 48,72
Convertir moneda
Gastos de envío: EUR 7,45
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

Cantidad disponible: 4 disponibles

Añadir al carrito

Imagen del vendedor

Petar Atanasov
ISBN 10: 6139831083 ISBN 13: 9786139831081
Nuevo Taschenbuch
Impresión bajo demanda

Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania

Calificación del vendedor: 5 de 5 estrellas Valoración 5 estrellas, Más información sobre las valoraciones de los vendedores

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Medical grade PDMS elastomer is a widely used biomaterial in medicine and for production of high-tech devices - MEMS and NEMS. Results on experimental study of the PDMS-elastomer processing by fs-, ps- and ns-lasers, working in UV, VIS and NIR regions of the spectra are presented. Different processing parameters as pulse duration, fluency, scanning speed, and overlapping of the subsequent pulses are varied in order to activate and change the surface morphology. High definition trenches are produced. Analyses by 3D Color Laser and Optical Microscope, XRD, SEM, XPS, and mi-Raman are accomplished in order to get information about the structural morphology and alteration of the chemical composition of the ablated traces. Optical properties of the processed material are specially studied and evaluated. Finally, attempts for successful metallization by Pt or Ni via electro less plating of the trenches produced are accomplished. The metallization process is not sensitive to the time interval after the laser treatment. The results are very promising and confirm the expectation to use such a laser-based technology and metallization for micro- or nano-fabrication of hi-tech devices. 52 pp. Englisch. Nº de ref. del artículo: 9786139831081

Contactar al vendedor

Comprar nuevo

EUR 35,90
Convertir moneda
Gastos de envío: EUR 23,00
De Alemania a Estados Unidos de America
Destinos, gastos y plazos de envío

Cantidad disponible: 2 disponibles

Añadir al carrito

Imagen de archivo

Petar Atanasov
Publicado por LAP Lambert Academic Publishing, 2018
ISBN 10: 6139831083 ISBN 13: 9786139831081
Nuevo Tapa blanda
Impresión bajo demanda

Librería: Biblios, Frankfurt am main, HESSE, Alemania

Calificación del vendedor: 5 de 5 estrellas Valoración 5 estrellas, Más información sobre las valoraciones de los vendedores

Condición: New. PRINT ON DEMAND. Nº de ref. del artículo: 18386212177

Contactar al vendedor

Comprar nuevo

EUR 51,32
Convertir moneda
Gastos de envío: EUR 9,95
De Alemania a Estados Unidos de America
Destinos, gastos y plazos de envío

Cantidad disponible: 4 disponibles

Añadir al carrito

Imagen del vendedor

Petar Atanasov
ISBN 10: 6139831083 ISBN 13: 9786139831081
Nuevo Taschenbuch

Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemania

Calificación del vendedor: 5 de 5 estrellas Valoración 5 estrellas, Más información sobre las valoraciones de los vendedores

Taschenbuch. Condición: Neu. Neuware -Medical grade PDMS elastomer is a widely used biomaterial in medicine and for production of high-tech devices ¿ MEMS and NEMS. Results on experimental study of the PDMS-elastomer processing by fs-, ps- and ns-lasers, working in UV, VIS and NIR regions of the spectra are presented. Different processing parameters as pulse duration, fluency, scanning speed, and overlapping of the subsequent pulses are varied in order to activate and change the surface morphology. High definition trenches are produced. Analyses by 3D Color Laser and Optical Microscope, XRD, SEM, XPS, and ¿-Raman are accomplished in order to get information about the structural morphology and alteration of the chemical composition of the ablated traces. Optical properties of the processed material are specially studied and evaluated. Finally, attempts for successful metallization by Pt or Ni via electro less plating of the trenches produced are accomplished. The metallization process is not sensitive to the time interval after the laser treatment. The results are very promising and confirm the expectation to use such a laser-based technology and metallization for micro- or nano-fabrication of hi-tech devices.Books on Demand GmbH, Überseering 33, 22297 Hamburg 52 pp. Englisch. Nº de ref. del artículo: 9786139831081

Contactar al vendedor

Comprar nuevo

EUR 35,90
Convertir moneda
Gastos de envío: EUR 60,00
De Alemania a Estados Unidos de America
Destinos, gastos y plazos de envío

Cantidad disponible: 2 disponibles

Añadir al carrito

Imagen del vendedor

Petar Atanasov
Publicado por LAP LAMBERT Academic Publishing, 2018
ISBN 10: 6139831083 ISBN 13: 9786139831081
Nuevo Taschenbuch
Impresión bajo demanda

Librería: AHA-BUCH GmbH, Einbeck, Alemania

Calificación del vendedor: 5 de 5 estrellas Valoración 5 estrellas, Más información sobre las valoraciones de los vendedores

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Medical grade PDMS elastomer is a widely used biomaterial in medicine and for production of high-tech devices - MEMS and NEMS. Results on experimental study of the PDMS-elastomer processing by fs-, ps- and ns-lasers, working in UV, VIS and NIR regions of the spectra are presented. Different processing parameters as pulse duration, fluency, scanning speed, and overlapping of the subsequent pulses are varied in order to activate and change the surface morphology. High definition trenches are produced. Analyses by 3D Color Laser and Optical Microscope, XRD, SEM, XPS, and mi-Raman are accomplished in order to get information about the structural morphology and alteration of the chemical composition of the ablated traces. Optical properties of the processed material are specially studied and evaluated. Finally, attempts for successful metallization by Pt or Ni via electro less plating of the trenches produced are accomplished. The metallization process is not sensitive to the time interval after the laser treatment. The results are very promising and confirm the expectation to use such a laser-based technology and metallization for micro- or nano-fabrication of hi-tech devices. Nº de ref. del artículo: 9786139831081

Contactar al vendedor

Comprar nuevo

EUR 37,20
Convertir moneda
Gastos de envío: EUR 60,48
De Alemania a Estados Unidos de America
Destinos, gastos y plazos de envío

Cantidad disponible: 1 disponibles

Añadir al carrito