9783843387354 - process capability of rapid manufacturing for plastic components: silicon moulding de singh, rupinder; singh thind, balpreet (9 resultados)
Idioma: Inglés
Editorial: VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2010
- Tapa blanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 76,95
Envío por EUR 3,45Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 76.
- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 43,35
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. PROCESS CAPABILITY OF RAPID MANUFACTURING FOR PLASTIC COMPONENTS | SILICON MOULDING | Rupinder Singh (u. a.) | Taschenbuch | 76 S. | Englisch | 2010 | LAP LAMBERT Academic Publishing | EAN 9783843387354 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrüc…k, mail[at]preigu[dot]de | Anbieter: preigu.
- Tapa blanda
Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Como Nuevo
EUR 159,65
Envío por EUR 29,14Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.
- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 49,00
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The purpose of the present study is to experimentally investigate rapid moulding solutions for plastic components using silicon moluding process. Starting from the identification of component, prototypes with two different types of…plastic materials were produced under different vacuum moulding conditions. Measurements on the coordinate measuring machine helped in calculating the dimensional tolerances of the plastic components produced. Some important mechanical properties were also compared to verify the suitability of the components. The study highlighted the process capability of silicon moulding process in terms dimensional accuracy for plastic components. Final components produced are acceptable as per IS standard (UNI EN 20286-I (1995) also according DIN 16901 standards for plastics. This process ensures rapid production of pre-series technological prototypes and proof of concept at less production cost and time. 76 pp. Englisch.
Idioma: Inglés
Editorial: VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2010
- Tapa blanda
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 77,03
Envío por EUR 7,58Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand pp. 76 2:B&W 6 x 9 in or 229 x 152 mm Perfect Bound on Creme w/Gloss Lam.
- Tapa blanda
- Impresión bajo demanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 41,05
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Singh RupinderRupinder Singh is working as an Associate Professor in Department of Production Engineering at Guru Nanak Dev Engineering College, Ludhiana, India. He has contributed about 140 research pa…pers in journals, workshops .
Idioma: Inglés
Editorial: VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2010
- Tapa blanda
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 79,26
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND pp. 76.
- Tapa blanda
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 49,00
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The purpose of the present study is to experimentally investigate rapid moulding solutions for plastic components using silicon moluding process. Starting from the identification of component, prototypes with two different types of plas…tic materials were produced under different vacuum moulding conditions. Measurements on the coordinate measuring machine helped in calculating the dimensional tolerances of the plastic components produced. Some important mechanical properties were also compared to verify the suitability of the components. The study highlighted the process capability of silicon moulding process in terms dimensional accuracy for plastic components. Final components produced are acceptable as per IS standard (UNI EN 20286-I (1995) also according DIN 16901 standards for plastics. This process ensures rapid production of pre-series technological prototypes and proof of concept at less production cost and time.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 76 pp. Englisch.
- Tapa blanda
- Impresión bajo demanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 49,00
Envío por EUR 60,66Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The purpose of the present study is to experimentally investigate rapid moulding solutions for plastic components using silicon moluding process. Starting from the identification of component, prototypes with two different types of plast…ic materials were produced under different vacuum moulding conditions. Measurements on the coordinate measuring machine helped in calculating the dimensional tolerances of the plastic components produced. Some important mechanical properties were also compared to verify the suitability of the components. The study highlighted the process capability of silicon moulding process in terms dimensional accuracy for plastic components. Final components produced are acceptable as per IS standard (UNI EN 20286-I (1995) also according DIN 16901 standards for plastics. This process ensures rapid production of pre-series technological prototypes and proof of concept at less production cost and time.
