PROCESS CAPABILITY OF RAPID MANUFACTURING FOR PLASTIC COMPONENTS: SILICON MOULDING - Tapa blanda

Singh, Rupinder; Singh Thind, Balpreet

 
9783843387354: PROCESS CAPABILITY OF RAPID MANUFACTURING FOR PLASTIC COMPONENTS: SILICON MOULDING
Tapa blanda
ISBN 10: 3843387354 ISBN 13: 9783843387354
Editorial: LAP LAMBERT Academic Publishing, 2010

Sinopsis

The purpose of the present study is to experimentally investigate rapid moulding solutions for plastic components using silicon moluding process. Starting from the identification of component, prototypes with two different types of plastic materials were produced under different vacuum moulding conditions. Measurements on the coordinate measuring machine helped in calculating the dimensional tolerances of the plastic components produced. Some important mechanical properties were also compared to verify the suitability of the components. The study highlighted the process capability of silicon moulding process in terms dimensional accuracy for plastic components. Final components produced are acceptable as per IS standard (UNI EN 20286-I (1995) also according DIN 16901 standards for plastics. This process ensures rapid production of pre-series technological prototypes and proof of concept at less production cost and time.

"Sinopsis" puede pertenecer a otra edición de este libro.

Reseña del editor

The purpose of the present study is to experimentally investigate rapid moulding solutions for plastic components using silicon moluding process. Starting from the identification of component, prototypes with two different types of plastic materials were produced under different vacuum moulding conditions. Measurements on the coordinate measuring machine helped in calculating the dimensional tolerances of the plastic components produced. Some important mechanical properties were also compared to verify the suitability of the components. The study highlighted the process capability of silicon moulding process in terms dimensional accuracy for plastic components. Final components produced are acceptable as per IS standard (UNI EN 20286-I (1995) also according DIN 16901 standards for plastics. This process ensures rapid production of pre-series technological prototypes and proof of concept at less production cost and time.

Biografía del autor

Rupinder Singh is working as an Associate Professor in Department of Production Engineering at Guru Nanak Dev Engineering College, Ludhiana, India. He has contributed about 140 research papers in journals, workshops and conferences at national/ international level. He has supervised 35 M.Tech theses.

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
LAP LAMBERT Academic Publishing
Año de publicación
2010
Idioma
Inglés
ISBN 10 
3843387354
ISBN 13 
9783843387354
Encuadernación
Tapa blanda
Número de páginas
76
Contacto del fabricante
no disponible
Persona responsable
no disponible