ISBN: 9783659543203 - single phase ups based on z-source inverter (8 resultados)

Condición: New. pp. 56.

Taschenbuch. Condición: Neu. Single Phase UPS Based On Z-source Inverter | Vaddi Ramesh (u. a.) | Taschenbuch | 56 S. | Englisch | 2018 | LAP LAMBERT Academic Publishing | EAN 9783659543203 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. …

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In This book use for Uninterruptible power supplies (UPSs) are widely used to supply critical loads, such as airline computers and life-support systems in hospitals, providing protection against power failure or anomalies of power-line voltage.In general, there are two types of traditional single phase UPSs. The first one couples a battery bank to a half or full-bridge inverter with a low-frequency transformer. In this type of UPSs, the ac output voltage is higher than that of the battery bank; thus, a step-up transformer is required to boost voltage. Due to the presence of the step-up transformer, the inverter current is much higher than the load current, causing high current stress on the switches of the inverter. The transformer also increases the weight, volume, and cost of the systemIn this type of UPSs, the additional booster is needed, leading to high cost and low efficiency. The controlling of the switches in the booster also complicates the system. The dead time in the pulse width-modulation (PWM). The proposed method is also implemented on hardware by using power electronic devices such as MOSFET and PIC controller for production of control signals. 56 pp. Englisch.…

Condición: New. Print on Demand pp. 56 2:B&W 6 x 9 in or 229 x 152 mm Perfect Bound on Creme w/Gloss Lam.

Condición: New. PRINT ON DEMAND pp. 56.

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - In This book use for Uninterruptible power supplies (UPSs) are widely used to supply critical loads, such as airline computers and life-support systems in hospitals, providing protection against power failure or anomalies of power-line voltage.In general, there are two types of traditional single phase UPSs. The first one couples a battery bank to a half or full-bridge inverter with a low-frequency transformer. In this type of UPSs, the ac output voltage is higher than that of the battery bank; thus, a step-up transformer is required to boost voltage. Due to the presence of the step-up transformer, the inverter current is much higher than the load current, causing high current stress on the switches of the inverter. The transformer also increases the weight, volume, and cost of the systemIn this type of UPSs, the additional booster is needed, leading to high cost and low efficiency. The controlling of the switches in the booster also complicates the system. The dead time in the pulse width-modulation (PWM). The proposed method is also implemented on hardware by using power electronic devices such as MOSFET and PIC controller for production of control signals.…

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Ramesh VaddiThe author obtained his B.Tech degree in Electricaland Electronics Engineering from the college of JNTUHyderabad, M.Tech degree in with a specialization inPower Electronics from JNTU Anantapur,India andPresently Pursuing .…

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In This book use for Uninterruptible power supplies (UPSs) are widely used to supply critical loads, such as airline computers and life-support systems in hospitals, providing protection against power failure or anomalies of power-line voltage.In general, there are two types of traditional single phase UPSs. The first one couples a battery bank to a half or full-bridge inverter with a low-frequency transformer. In this type of UPSs, the ac output voltage is higher than that of the battery bank; thus, a step-up transformer is required to boost voltage. Due to the presence of the step-up transformer, the inverter current is much higher than the load current, causing high current stress on the switches of the inverter. The transformer also increases the weight, volume, and cost of the systemIn this type of UPSs, the additional booster is needed, leading to high cost and low efficiency. The controlling of the switches in the booster also complicates the system. The dead time in the pulse width-modulation (PWM). The proposed method is also implemented on hardware by using power electronic devices such as MOSFET and PIC controller for production of control signals.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 56 pp. Englisch.…