Ramesh vaddi (31 resultados)

Condición: New. pp. 64.

Condición: New. pp. 80.

Condición: New. pp. 56.

Taschenbuch. Condición: Neu. Single Phase UPS Based On Z-source Inverter | Vaddi Ramesh (u. a.) | Taschenbuch | 56 S. | Englisch | 2018 | LAP LAMBERT Academic Publishing | EAN 9783659543203 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. …

Taschenbuch. Condición: Neu. Enhancement of ATC with TCSC and SVC by Using RGA | Vaddi Ramesh (u. a.) | Taschenbuch | 80 S. | Englisch | 2014 | LAP LAMBERT Academic Publishing | EAN 9783659535499 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu. …

Taschenbuch. Condición: Neu. Reactive Power Compensation Using Multi Level Converters | Vaddi Ramesh (u. a.) | Taschenbuch | 72 S. | Englisch | 2014 | LAP LAMBERT Academic Publishing | EAN 9783659543142 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

Taschenbuch. Condición: Neu. Hybrid Differential Evolution Particle Swarm Optimization Algorithm | Vaddi Ramesh (u. a.) | Taschenbuch | 64 S. | Englisch | 2014 | LAP LAMBERT Academic Publishing | EAN 9783659524448 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. …

paperback. Condición: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

paperback. Condición: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In this book use of TCSC and SVC to maximize Available Transfer Capability (ATC) generally defined as the maximum power transfer transaction between a specific power-seller and a power-buyer in a network during normal and contingency cases. ATC is computed using Continuous Power Flow (CPF) method considering both line thermal limit as well as bus voltage limits. Real-code Genetic Algorithm is used as the optimization tool to determine the location as well as the controlling parameter of TCSC or Simultaneously. The performance of the Real-code Genetic Algorithm has been tested on IEEE 14-Bus System and IEEE 24-Bus Reliability Test System. 80 pp. Englisch.…

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This is book use of proposed overview of the state of the art in reactive power compensation technologies. The principles of operations, characteristics and application examples of VAR compensators implemented with switches and self-commutated converters are presented. Static VAR compensators are used to improve voltage regulation, stability. The reactive power component is estimated from the reactive component of input current (Iq).In the proposed work 2-level and 3-level diode-clamped multilevel inverters are studied and then implemented for the applications of reactive power compensation and are simulated by using MATLAB/Simulink for various parameters like Active & Reactive power at load, Per unit input and output voltages. Tabulation can be made for Converter & Load, Active & Reactive powers. 72 pp. Englisch.…

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In This book use for Uninterruptible power supplies (UPSs) are widely used to supply critical loads, such as airline computers and life-support systems in hospitals, providing protection against power failure or anomalies of power-line voltage.In general, there are two types of traditional single phase UPSs. The first one couples a battery bank to a half or full-bridge inverter with a low-frequency transformer. In this type of UPSs, the ac output voltage is higher than that of the battery bank; thus, a step-up transformer is required to boost voltage. Due to the presence of the step-up transformer, the inverter current is much higher than the load current, causing high current stress on the switches of the inverter. The transformer also increases the weight, volume, and cost of the systemIn this type of UPSs, the additional booster is needed, leading to high cost and low efficiency. The controlling of the switches in the booster also complicates the system. The dead time in the pulse width-modulation (PWM). The proposed method is also implemented on hardware by using power electronic devices such as MOSFET and PIC controller for production of control signals. 56 pp. Englisch.…

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In an alternating current system, if the system is resistive i.e. voltage and current are in phase only real power is transmitted and if there is a time shift between voltage and current both active and reactive power are transmitted. When the average with respect to time is calculated, the average active power exists causing a net flow of energy from one point to another, whereas average reactive power is zero, irrespective of the network or state of the system.This project presents and compares three algorithms based on swarm intelligence and evolutionary techniques for solving the reactive power optimization problem Case studies on the IEEE 10-bus,34-bus systems illustrate the effectiveness of these algorithms in terms of the quality of the solutions found and their convergence characteristics. The results proved that the proposed DEPSO algorithm provides higher-quality solution with smaller iterations than the other two methods. DEPSO indeed outperforms DE or basic PSO method on this problem when comparing power loss reduction and number of iterations required for achieving convergence 64 pp. Englisch.…

Condición: New. Print on Demand pp. 64 2:B&W 6 x 9 in or 229 x 152 mm Perfect Bound on Creme w/Gloss Lam.

Condición: New. Print on Demand pp. 80 2:B&W 6 x 9 in or 229 x 152 mm Perfect Bound on Creme w/Gloss Lam.

Condición: New. Print on Demand pp. 56 2:B&W 6 x 9 in or 229 x 152 mm Perfect Bound on Creme w/Gloss Lam.

Condición: New. PRINT ON DEMAND pp. 64.

Condición: New. PRINT ON DEMAND pp. 80.

Condición: New. PRINT ON DEMAND pp. 56.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Ramesh VaddiThe author obtained his B.Tech degree in Electricaland Electronics Engineering from the college of JNTUHyderabad, M.Tech degree in with a specialization inPower Electronics from JNTU Anantapur,India andPresently Pursuing .…

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Ramesh VaddiThe author obtained his B.Tech degree in Electrical and Electronics Engineering from the college of JNTU Hyderabad, M.Tech degree in with a specialization in Power Electronics from JNTU Anantapur,India and Presently Pursu.…

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Ramesh VaddiThe author obtained his B.Tech degree in Electrical and Electronics Engineering from the college of JNTU Hyderabad, M.Tech degree in with a specialization in Power Electronics from JNTU Anantapur,India and Presently Pursu.…

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Ramesh VaddiThe author obtained his B.Tech degree in Electrical and Electronics Engineering from the college of JNTU Hyderabad, M.Tech degree in with a specialization in Power Electronics from JNTU Anantapur,India and Presently Pursu.…

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - In This book use for Uninterruptible power supplies (UPSs) are widely used to supply critical loads, such as airline computers and life-support systems in hospitals, providing protection against power failure or anomalies of power-line voltage.In general, there are two types of traditional single phase UPSs. The first one couples a battery bank to a half or full-bridge inverter with a low-frequency transformer. In this type of UPSs, the ac output voltage is higher than that of the battery bank; thus, a step-up transformer is required to boost voltage. Due to the presence of the step-up transformer, the inverter current is much higher than the load current, causing high current stress on the switches of the inverter. The transformer also increases the weight, volume, and cost of the systemIn this type of UPSs, the additional booster is needed, leading to high cost and low efficiency. The controlling of the switches in the booster also complicates the system. The dead time in the pulse width-modulation (PWM). The proposed method is also implemented on hardware by using power electronic devices such as MOSFET and PIC controller for production of control signals.…

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - In this book use of TCSC and SVC to maximize Available Transfer Capability (ATC) generally defined as the maximum power transfer transaction between a specific power-seller and a power-buyer in a network during normal and contingency cases. ATC is computed using Continuous Power Flow (CPF) method considering both line thermal limit as well as bus voltage limits. Real-code Genetic Algorithm is used as the optimization tool to determine the location as well as the controlling parameter of TCSC or Simultaneously. The performance of the Real-code Genetic Algorithm has been tested on IEEE 14-Bus System and IEEE 24-Bus Reliability Test System.…

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This is book use of proposed overview of the state of the art in reactive power compensation technologies. The principles of operations, characteristics and application examples of VAR compensators implemented with switches and self-commutated converters are presented. Static VAR compensators are used to improve voltage regulation, stability. The reactive power component is estimated from the reactive component of input current (Iq).In the proposed work 2-level and 3-level diode-clamped multilevel inverters are studied and then implemented for the applications of reactive power compensation and are simulated by using MATLAB/Simulink for various parameters like Active & Reactive power at load, Per unit input and output voltages. Tabulation can be made for Converter & Load, Active & Reactive powers.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 72 pp. Englisch.…

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In This book use for Uninterruptible power supplies (UPSs) are widely used to supply critical loads, such as airline computers and life-support systems in hospitals, providing protection against power failure or anomalies of power-line voltage.In general, there are two types of traditional single phase UPSs. The first one couples a battery bank to a half or full-bridge inverter with a low-frequency transformer. In this type of UPSs, the ac output voltage is higher than that of the battery bank; thus, a step-up transformer is required to boost voltage. Due to the presence of the step-up transformer, the inverter current is much higher than the load current, causing high current stress on the switches of the inverter. The transformer also increases the weight, volume, and cost of the systemIn this type of UPSs, the additional booster is needed, leading to high cost and low efficiency. The controlling of the switches in the booster also complicates the system. The dead time in the pulse width-modulation (PWM). The proposed method is also implemented on hardware by using power electronic devices such as MOSFET and PIC controller for production of control signals.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 56 pp. Englisch.…

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In this book use of TCSC and SVC to maximize Available Transfer Capability (ATC) generally defined as the maximum power transfer transaction between a specific power-seller and a power-buyer in a network during normal and contingency cases. ATC is computed using Continuous Power Flow (CPF) method considering both line thermal limit as well as bus voltage limits. Real-code Genetic Algorithm is used as the optimization tool to determine the location as well as the controlling parameter of TCSC or Simultaneously. The performance of the Real-code Genetic Algorithm has been tested on IEEE 14-Bus System and IEEE 24-Bus Reliability Test System.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 80 pp. Englisch.…

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In an alternating current system, if the system is resistive i.e. voltage and current are in phase only real power is transmitted and if there is a time shift between voltage and current both active and reactive power are transmitted. When the average with respect to time is calculated, the average active power exists causing a net flow of energy from one point to another, whereas average reactive power is zero, irrespective of the network or state of the system.This project presents and compares three algorithms based on swarm intelligence and evolutionary techniques for solving the reactive power optimization problem Case studies on the IEEE 10-bus,34-bus systems illustrate the effectiveness of these algorithms in terms of the quality of the solutions found and their convergence characteristics. The results proved that the proposed DEPSO algorithm provides higher-quality solution with smaller iterations than the other two methods. DEPSO indeed outperforms DE or basic PSO method on this problem when comparing power loss reduction and number of iterations required for achieving convergenceVDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 64 pp. Englisch.…

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - In an alternating current system, if the system is resistive i.e. voltage and current are in phase only real power is transmitted and if there is a time shift between voltage and current both active and reactive power are transmitted. When the average with respect to time is calculated, the average active power exists causing a net flow of energy from one point to another, whereas average reactive power is zero, irrespective of the network or state of the system.This project presents and compares three algorithms based on swarm intelligence and evolutionary techniques for solving the reactive power optimization problem Case studies on the IEEE 10-bus,34-bus systems illustrate the effectiveness of these algorithms in terms of the quality of the solutions found and their convergence characteristics. The results proved that the proposed DEPSO algorithm provides higher-quality solution with smaller iterations than the other two methods. DEPSO indeed outperforms DE or basic PSO method on this problem when comparing power loss reduction and number of iterations required for achieving convergence.…