9783540559658 - graphics modeling and visualization in science and technology (beiträge zur graphischen datenverarbeitung) de josé c. teixeira, martin göbel (16 resultados)
- Tapa blanda
Librería: books4less (Versandantiquariat Petra Gros GmbH & Co. KG), Welling, Alemaniabooks4less (Versandantiquariat Petra Gros GmbH & Co. KG)
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 19,95
Envío por EUR 15,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Broschiert. Condición: Gut. 263 Seiten Das hier angebotene Buch stammt aus einer teilaufgelösten Bibliothek und kann die entsprechenden Kennzeichnungen aufweisen (Rückenschild, Instituts-Stempel.); der Buchzustand ist ansonsten ordentlich und dem Alter entsprechend gut. In ENGLISCHER Sprache. Sprache: Englisch Gewicht in Gramm:…460.
- Tapa blanda
Librería: Librairie Parrêsia, Figeac, FranciaLibrairie Parrêsia
Contactar con el vendedorVendedor de 3 estrellasCondición: Usado - Aceptable
EUR 20,00
Envío por EUR 32,50Se envía de Francia a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback Jan 01, 1993. Condición: Used: Good. Graphics Modeling and Visualization in Science and Technology | Gobel/Teixeira | Springer, 1993, in-8 cartonnage de bibliothèque (couverture originale conservée et plastifiée), 263 pages. Couverture propre. Dos solide. Intérieur frais. Exemplaire de bibliothèque : petit code barre e…n pied de 1re de couv., cotation au dos, rares et discrets petits tampons à l'intérieur de l'ouvrage. Bel état ! [BT39+].
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 116,82
Envío por EUR 14,02Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 131,96
Envío por EUR 2,31Se envía dentro de Estados Unidos de AmericaCantidad disponible: 15 disponibles
Condición: New.
- Tapa blanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 148,17
Envío por EUR 3,49Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. xii + 263.
- Tapa blanda
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 154,97
Envío por EUR 11,71Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: Brand New. 1st edition. 275 pages. 7.80x5.12x1.00 inches. In Stock.
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 106,99
Envío por EUR 62,21Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This workshop on Graphics Modeling and Visualization in Scientific, Engineering and Technical Applications was held in Darmstadt, Germany, on 13-14 April 1992. Visualization is known as the key technology to control massive data sets and to achieve… insight into these tera bytes of data. Graphics Modeling is the enabling technology for advanced interaction. This book contains the keynote papers from three internationally well-known invited speakers and a selection of papers submitted to this workshop. Due to the effective scientific contacts between German and Portuguese researchers, and the results from this cooperation, the workshop was also the 2nd Luso-German Meet ing on Computer Graphics. The keynote papers present an excellent overview of the main topics of the workshop. Prof. Rae Earnshaw focuses on Scientific Visualization as an inter disciplinary area of research and application, presenting state of the art concepts and works currently being developed, and the requirements of visualization sys tems in the 90's. Prof. Frank-Lothar Krause presents Product Modeling as the key for information integration in industry, in particular to support CAD-CAM inte gration and CIM. Dr. Rolf Iindner introduces the DEDICATED (DEvelopment of a new DImension in Computer Assisted Teaching and EDucation) project, a European DELTA project with a strong involvement of German and Portuguese partners.
- Tapa blanda
Librería: Buchpark, Trebbin, AlemaniaBuchpark
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Excelente
EUR 83,44
Envío por EUR 105,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 3 disponibles
Condición: Sehr gut. Zustand: Sehr gut | Seiten: 288 | Sprache: Englisch | Produktart: Bücher | This workshop on Graphics Modeling and Visualization in Scientific, Engineering and Technical Applications was held in Darmstadt, Germany, on 13-14 April 1992. Visualization is known as the key technology to control massive data sets…and to achieve insight into these tera bytes of data. Graphics Modeling is the enabling technology for advanced interaction. This book contains the keynote papers from three internationally well-known invited speakers and a selection of papers submitted to this workshop. Due to the effective scientific contacts between German and Portuguese researchers, and the results from this cooperation, the workshop was also the 2nd Luso-German Meet ing on Computer Graphics. The keynote papers present an excellent overview of the main topics of the workshop. Prof. Rae Earnshaw focuses on Scientific Visualization as an inter disciplinary area of research and application, presenting state of the art concepts and works currently being developed, and the requirements of visualization sys tems in the 90's. Prof. Frank-Lothar Krause presents Product Modeling as the key for information integration in industry, in particular to support CAD-CAM inte gration and CIM. Dr. Rolf Iindner introduces the DEDICATED (DEvelopment of a new DImension in Computer Assisted Teaching and EDucation) project, a European DELTA project with a strong involvement of German and Portuguese partners.
- Tapa blanda
Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Como Nuevo
EUR 188,10
Envío por EUR 29,27Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.
- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 220,80
Envío por EUR 2,31Se envía dentro de Estados Unidos de AmericaCantidad disponible: 15 disponibles
Condición: As New. Unread book in perfect condition.
Idioma: Inglés
Editorial: Springer Berlin Heidelberg, Springer Berlin Heidelberg Jul 1993, 1993
- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 106,99
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This workshop on Graphics Modeling and Visualization in Scientific, Engineering and Technical Applications was held in Darmstadt, Germany, on 13-14 April 1992. Visualization is known as the key technology to control massive data set…s and to achieve insight into these tera bytes of data. Graphics Modeling is the enabling technology for advanced interaction. This book contains the keynote papers from three internationally well-known invited speakers and a selection of papers submitted to this workshop. Due to the effective scientific contacts between German and Portuguese researchers, and the results from this cooperation, the workshop was also the 2nd Luso-German Meet ing on Computer Graphics. The keynote papers present an excellent overview of the main topics of the workshop. Prof. Rae Earnshaw focuses on Scientific Visualization as an inter disciplinary area of research and application, presenting state of the art concepts and works currently being developed, and the requirements of visualization sys tems in the 90's. Prof. Frank-Lothar Krause presents Product Modeling as the key for information integration in industry, in particular to support CAD-CAM inte gration and CIM. Dr. Rolf Iindner introduces the DEDICATED (DEvelopment of a new DImension in Computer Assisted Teaching and EDucation) project, a European DELTA project with a strong involvement of German and Portuguese partners. 288 pp. Englisch.
- Tapa blanda
- Impresión bajo demanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 92,27
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. The book reports on a workshop on Graphics Modeling and Visualization in Science and Technology. The articles cover the following fields: engineering and design, environmental research, material sciences, computationa…l sciences, fluid dynamics and algorithm.
- Tapa blanda
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 154,89
Envío por EUR 7,61Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand pp. xii + 263 137 Figures.
- Tapa blanda
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 155,31
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND pp. xii + 263.
Más imágenes- Tapa blanda
- Impresión bajo demanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 95,70
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Graphics Modeling and Visualization in Science and Technology | in Science and Technology | Jose C. Teixeira (u. a.) | Taschenbuch | xii | Englisch | 1993 | Springer | EAN 9783540559658 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartman…n[at]springer[dot]com | Anbieter: preigu Print on Demand.
Idioma: Inglés
Editorial: Springer Berlin Heidelberg, Springer Jul 1993, 1993
- Tapa blanda
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 106,99
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This workshop on Graphics Modeling and Visualization in Scientific, Engineering and Technical Applications was held in Darmstadt, Germany, on 13-14 April 1992. Visualization is known as the key technology to control massive data sets an…d to achieve insight into these tera bytes of data. Graphics Modeling is the enabling technology for advanced interaction. This book contains the keynote papers from three internationally well-known invited speakers and a selection of papers submitted to this workshop. Due to the effective scientific contacts between German and Portuguese researchers, and the results from this cooperation, the workshop was also the 2nd Luso-German Meet ing on Computer Graphics. The keynote papers present an excellent overview of the main topics of the workshop. Prof. Rae Earnshaw focuses on Scientific Visualization as an inter disciplinary area of research and application, presenting state of the art concepts and works currently being developed, and the requirements of visualization sys tems in the 90's. Prof. Frank-Lothar Krause presents Product Modeling as the key for information integration in industry, in particular to support CAD-CAM inte gration and CIM. Dr. Rolf Iindner introduces the DEDICATED (DEvelopment of a new DImension in Computer Assisted Teaching and EDucation) project, a European DELTA project with a strong involvement of German and Portuguese partners.Springer-Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 288 pp. Englisch.
