9783032043009 - circular approaches for the ecodesign, repair and remanufacturing of car and mass electronics: the circ-uits project (springerbriefs in applied sciences and technology) (11 resultados)
Idioma: Inglés
Editorial: Springer Nature Switzerland AG, Cham, 2025
Serie: Libro 442 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
Librería: Grand Eagle Retail, Bensenville, IL, Estados Unidos de AmericaGrand Eagle Retail
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 47,38
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: new. Paperback. This open access book summarizes research being pursued within the CIRC-UITS project, funded by the European Union community under the Horizon Europe programme, the goal of which is to demonstrate the improvement of circularity of automotive and mass electronics sectors by recovering materia…ls from waste products, as well as supporting the reuse and remanufacturing of electronic components into new (high value) products in these sectors. To this aim, the CIRC-UITS project wants to unlock the full potentials/benefits of circular practices through digital technologies. Specifically, within the project, digital twins, augmented reality, web platforms and simulation tools have been developed. Another important objective is the increase of resource efficiency/independency and reduction of the negative environmental footprint of electronics production processes through circular behaviors. To this aim, within the CIRC-UITS project a set of methodologies and decision-support tools for the assessment and advisory of sustainability and circularity performances have been developed. Another important objective is the improvement/standardization of information/data sharing/exchange among industrial leaders involved in the same and/or similar value chain. To this aim, the CIRC-UITS projects consortium has been actively involved in the development of two CEN Workshop Agreements, one about the implementation of a Digital Product Passport (DPP) dedicated to electronic components and another dedicated to the application of the standard EN 45554 in the automotive industry. Finally, the CIRC-UITS project demonstrated the benefits coming from the adoption of a Digital Circular Economy through 4 pilots, one on Electronic Control Units (ECU), one on Tire Pressure Monitoring Sensors (TPMS), one on In-Mold Electronics (IME) and one on sorting of obsolete Printed Circuit Boards (PCB) from washing machines. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Idioma: Inglés
Editorial: Springer, 2025
Serie: Libro 442 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 54,70
Envío por EUR 3,42Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New.
Idioma: Inglés
Editorial: Springer Nature, 2025
Serie: Libro 442 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 54,03
Envío por EUR 11,69Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: Brand New. 130 pages. 9.26x6.11x9.25 inches. In Stock.
Idioma: Inglés
Editorial: Springer, Springer, 2025
Serie: Libro 442 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 32,09
Envío por EUR 61,42Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This open access book summarizes research being pursued within the CIRC-UITS project, funded by the European Union community under the Horizon Europe programme, the goal of which is to demonstrate the improvement of circularity of automotive and ma…ss electronics sectors by recovering materials from waste products, as well as supporting the reuse and remanufacturing of electronic components into new (high value) products in these sectors. To this aim, the CIRC-UITS project wants to unlock the full potentials/benefits of circular practices through digital technologies. Specifically, within the project, digital twins, augmented reality, web platforms and simulation tools have been developed. Another important objective is the increase of resource efficiency/independency and reduction of the negative environmental footprint of electronics production processes through circular behaviors. To this aim, within the CIRC-UITS project a set of methodologies and decision-support tools for the assessment and advisory of sustainability and circularity performances have been developed. Another important objective is the improvement/standardization of information/data sharing/exchange among industrial leaders involved in the same and/or similar value chain. To this aim, the CIRC-UITS project s consortium has been actively involved in the development of two CEN Workshop Agreements, one about the implementation of a Digital Product Passport (DPP) dedicated to electronic components and another dedicated to the application of the standard EN 45554 in the automotive industry. Finally, the CIRC-UITS project demonstrated the benefits coming from the adoption of a Digital Circular Economy through 4 pilots, one on Electronic Control Units (ECU), one on Tire Pressure Monitoring Sensors (TPMS), one on In-Mold Electronics (IME) and one on sorting of obsolete Printed Circuit Boards (PCB) from washing machines.
Idioma: Inglés
Editorial: Springer, 2025
Serie: Libro 442 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 32,45
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Circular Approaches for the Ecodesign, Repair and Remanufacturing of Car and Mass Electronics | The CIRC-UITS Project | Paolo Rosa (u. a.) | Taschenbuch | SpringerBriefs in Applied Sciences and Technology | vi | Englisch | 2025 | Springer | EAN 9783032043009 | Verantwortliche Person für die EU: Sprin…ger Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Idioma: Inglés
Editorial: Springer, 2025
Serie: Libro 442 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
- Impresión bajo demanda
Librería: Brook Bookstore On Demand, Napoli, NA, ItaliaBrook Bookstore On Demand
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 30,22
Envío por EUR 5,50Se envía de Italia a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: new. Questo è un articolo print on demand.
Idioma: Inglés
Editorial: Springer, Berlin, Politecnico Di Milano, Springer, 2025
Serie: Libro 442 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 32,09
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This open access book summarizes research being pursued within the CIRC-UITS project, funded by the European Union community under the Horizon Europe programme, the goal of which is to demonstrate the improvement of circularity of a…utomotive and mass electronics sectors by recovering materials from waste products, as well as supporting the reuse and remanufacturing of electronic components into new (high value) products in these sectors. To this aim, the CIRC-UITS project wants to unlock the full potentials/benefits of circular practices through digital technologies. Specifically, within the project, digital twins, augmented reality, web platforms and simulation tools have been developed. Another important objective is the increase of resource efficiency/independency and reduction of the negative environmental footprint of electronics production processes through circular behaviors. To this aim, within the CIRC-UITS project a set of methodologies and decision-support tools for the assessment and advisory of sustainability and circularity performances have been developed. Another important objective is the improvement/standardization of information/data sharing/exchange among industrial leaders involved in the same and/or similar value chain. To this aim, the CIRC-UITS project s consortium has been actively involved in the development of two CEN Workshop Agreements, one about the implementation of a Digital Product Passport (DPP) dedicated to electronic components and another dedicated to the application of the standard EN 45554 in the automotive industry. Finally, the CIRC-UITS project demonstrated the benefits coming from the adoption of a Digital Circular Economy through 4 pilots, one on Electronic Control Units (ECU), one on Tire Pressure Monitoring Sensors (TPMS), one on In-Mold Electronics (IME) and one on sorting of obsolete Printed Circuit Boards (PCB) from washing machines. 152 pp. Englisch.
Idioma: Inglés
Editorial: Springer, 2025
Serie: Libro 442 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 51,82
Envío por EUR 7,60Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand.
Idioma: Inglés
Editorial: Springer, 2025
Serie: Libro 442 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 53,51
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND.
Idioma: Inglés
Editorial: Springer Verlag GmbH, 2025
Serie: Libro 442 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
- Impresión bajo demanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 30,82
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt.
Idioma: Inglés
Editorial: Springer, Springer Dez 2025, 2025
Serie: Libro 442 de 472 - SpringerBriefs in Applied Sciences and Technology
- Tapa blanda
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 32,09
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This open access book summarizes research being pursued within the CIRC-UITS project, funded by the European Union community under the Horizon Europe programme, the goal of which is to demonstrate the improvement of circularity of autom…otive and mass electronics sectors by recovering materials from waste products, as well as supporting the reuse and remanufacturing of electronic components into new (high value) products in these sectors. To this aim, the CIRC-UITS project wants to unlock the full potentials/benefits of circular practices through digital technologies. Specifically, within the project, digital twins, augmented reality, web platforms and simulation tools have been developed. Another important objective is the increase of resource efficiency/independency and reduction of the negative environmental footprint of electronics production processes through circular behaviors. To this aim, within the CIRC-UITS project a set of methodologies and decision-support tools for the assessment and advisory of sustainability and circularity performances have been developed. Another important objective is the improvement/standardization of information/data sharing/exchange among industrial leaders involved in the same and/or similar value chain. To this aim, the CIRC-UITS project's consortium has been actively involved in the development of two CEN Workshop Agreements, one about the implementation of a Digital Product Passport (DPP) dedicated to electronic components and another dedicated to the application of the standard EN 45554 in the automotive industry. Finally, the CIRC-UITS project demonstrated the benefits coming from the adoption of a Digital Circular Economy through 4 pilots, one on Electronic Control Units (ECU), one on Tire Pressure Monitoring Sensors (TPMS), one on In-Mold Electronics (IME) and one on sorting of obsolete Printed Circuit Boards (PCB) from washing machines.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 160 pp. Englisch.
