9781447119470 - parallel processing in digital control (advances in industrial control) de garcia nocetti, d. fabian fabian garcia; fleming, peter j. (12 resultados)
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 61,61
Envío por EUR 14,11Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa blanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 78,16
Envío por EUR 3,49Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 166.
- Tapa blanda
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 78,02
Envío por EUR 11,78Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: Brand New. 159 pages. 9.53x6.69x0.37 inches. In Stock.
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 58,39
Envío por EUR 61,47Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Parallel Processing in Digital Control is a volume to be published in the new Advances in Industrial Control series, edited by Professor M.J. Grimble and Dr. M.A. Johnson of the Industrial Control Unit, University of Strathclyde. The growing comple…xity of digital control systems in such areas as robotics, flight control and engine control has created a demand for faster and more reliable systems. This book examines how parallel processing can satisfy these requirements. Following a survey of parallel computer architectures, MIMD (Multiple Instruction Multiple Data) machines are identified as suitable systems for digital control problems, which are characterised by a mixture of regular and irregular algorithmic tasks. An example of a typical MIMD architecture, suitable for real-time control, (the Inmos Transputer) is introduced together with its associated parallel programming language (Occam). The key problem in implementing parallel software is associated with mapping parallel tasks onto physical processors. In this book a variety of schemes are described and assessed to help illustrate potential areas of difficulty for the real-time control software engineer. Solutions are proposed and tested on a flight control case study example. Recognising the widespread acceptance of MATLAB and its derivatives for computer aided control system design, this book demonstrates how mapping strategies can be realised in this environment and integrated with a transputer development system for on-line performance evaluation. A case study example demonstrates the power of this approach and important issues are highlighted. Readers will experience the advantages of parallel processing in digital control while being made aware of the key factors to be considered in the development of an effective solution. Practising control engineers and graduate/post-graduate students will find the book of particular interest and benefit.
- Tapa blanda
Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Como Nuevo
EUR 107,95
Envío por EUR 29,44Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: Like New. Like New. book.
- Tapa blanda
- Impresión bajo demanda
Librería: Brook Bookstore On Demand, Napoli, NA, ItaliaBrook Bookstore On Demand
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 46,22
Envío por EUR 5,50Se envía de Italia a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: new. Questo è un articolo print on demand.
- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 53,49
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Parallel Processing in Digital Control is a volume to be published in the new Advances in Industrial Control series, edited by Professor M.J. Grimble and Dr. M.A. Johnson of the Industrial Control Unit, University of Strathclyde. Th…e growing complexity of digital control systems in such areas as robotics, flight control and engine control has created a demand for faster and more reliable systems. This book examines how parallel processing can satisfy these requirements. Following a survey of parallel computer architectures, MIMD (Multiple Instruction Multiple Data) machines are identified as suitable systems for digital control problems, which are characterised by a mixture of regular and irregular algorithmic tasks. An example of a typical MIMD architecture, suitable for real-time control, (the Inmos Transputer) is introduced together with its associated parallel programming language (Occam). The key problem in implementing parallel software is associated with mapping parallel tasks onto physical processors. In this book a variety of schemes are described and assessed to help illustrate potential areas of difficulty for the real-time control software engineer. Solutions are proposed and tested on a flight control case study example. Recognising the widespread acceptance of MATLAB and its derivatives for computer aided control system design, this book demonstrates how mapping strategies can be realised in this environment and integrated with a transputer development system for on-line performance evaluation. A case study example demonstrates the power of this approach and important issues are highlighted. Readers will experience the advantages of parallel processing in digital control while being made aware of the key factors to be considered in the development of an effective solution. Practising control engineers and graduate/post-graduate students will find the book of particular interest and benefit. 164 pp. Englisch.
- Tapa blanda
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 78,85
Envío por EUR 7,65Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand pp. 166 79 Figures, 67:B&W 6.69 x 9.61 in or 244 x 170 mm (Pinched Crown) Perfect Bound on White w/Gloss Lam.
- Tapa blanda
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 79,30
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND pp. 166.
- Tapa blanda
- Impresión bajo demanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 48,37
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Parallel Processing in Digital Control is a volume to be published in the new Advances in Industrial Control series, edited by Professor M.J. Grimble and Dr. M.A. Johnson of the Industrial Control Unit, University of…Strathclyde. The growing c.
- Tapa blanda
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 53,49
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Parallel Processing in Digital Control is a volume to be published in the new Advances in Industrial Control series, edited by Professor M.J. Grimble and Dr. M.A. Johnson of the Industrial Control Unit, University of Strathclyde. The gr…owing complexity of digital control systems in such areas as robotics, flight control and engine control has created a demand for faster and more reliable systems. This book examines how parallel processing can satisfy these requirements. Following a survey of parallel computer architectures, MIMD (Multiple Instruction Multiple Data) machines are identified as suitable systems for digital control problems, which are characterised by a mixture of regular and irregular algorithmic tasks. An example of a typical MIMD architecture, suitable for real-time control, (the Inmos Transputer) is introduced together with its associated parallel programming language (Occam). The key problem in implementing parallel software is associated with mapping parallel tasks onto physical processors. In this book a variety of schemes are described and assessed to help illustrate potential areas of difficulty for the real-time control software engineer. Solutions are proposed and tested on a flight control case study example. Recognising the widespread acceptance of MATLAB and its derivatives for computer aided control system design, this book demonstrates how mapping strategies can be realised in this environment and integrated with a transputer development system for on-line performance evaluation. A case study example demonstrates the power of this approach and important issues are highlighted. Readers will experience the advantages of parallel processing in digital control while being made aware of the key factors to be considered in the development of an effective solution. Practising control engineers and graduate/post-graduate students will find the book of particular interest and benefit.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 164 pp. Englisch.
Más imágenes- Tapa blanda
- Impresión bajo demanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 50,25
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Parallel Processing in Digital Control | D. Fabian Garcia Nocetti (u. a.) | Taschenbuch | Advances in Industrial Control | xiv | Englisch | 2011 | Springer | EAN 9781447119470 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]sprin…ger[dot]com | Anbieter: preigu Print on Demand.
