9780981975306 - SKM, ETAP, & EDSA Power System Analysis Tutorials de Tubbs, Stephen Philip (24 resultados)

paperback. Condición: Very Good. Connecting readers with great books since 1972! Used books may not include companion materials, and may have some shelf wear or limited writing. We ship orders daily and Customer Service is our top priority!

Condición: New.

Paperback or Softback. Condición: New. SKM, ETAP, & EDSA Power System Analysis Tutorials. Book.

Paperback. Condición: New.

Condición: As New. Unread book in perfect condition.

Condición: New. In.

PF. Condición: New.

Condición: New.

Condición: As New. Unread book in perfect condition.

Paperback. Condición: New.

PAP. Condición: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

PAP. Condición: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

Paperback. Condición: new. Paperback. The object of this book is to teach the beginner the basics of three popular power system analysis programs. These programs are designed to simulate and analyze electrical power generation and distribution systems in normal operation and in short-circuit. The programs also have many add-on options like protection selection, arc flash analysis, transmission line sag & tension, raceway calculations, transient motor starting, etc. The programs have Demo (demonstration or trial) versions to allow people to tryout and learn about them. This book provides the engineer and technologist with information needed to use the Demo versions of SKM, ETAP, and EDSA for load flow and short-circuit analysis. The beginner learns how to use them on a small, but realistic, three-phase power system. The information gained is similar to that which students pay for in company-taught "Introduction to ." courses. However, with this book, the student avoids paying tuition, learns at times of his own convenience, and can compare the different programs. In this book, load flow (power-flow) and short-circuit analyses are done on a small steady-state three-phase power system with manual methods. Then, each program is used to carry out the same analyses. Since in practice, three-phase systems are the most often analyzed, only three-phase systems will be considered in this book. The DC and single-phase capabilities of the programs will not be considered. The person using this book should already have an analytical electrical background. Academically, he should be educated to at least the level of a university two-year electrical engineering technology program. The object of this book is to teach the beginner the basics of three popular power system analysis programs. These programs are designed to simulate and analyze electrical power generation and distribution systems in normal operation and in short-circuit. The programs also have many add-on options like protection selection, arc flash analysis, transmission line sag & tension, raceway calculations, transient motor starting, etc. The programs have Demo (demonstration or trial) versions to allow people to tryout and learn about them. This book provides the engineer and technologist with information needed to use the Demo versions of SKM, ETAP, and EDSA for load flow and short-circuit analysis. The beginner learns how to use them on a small, but realistic, three-phase power system. The information gained is similar to that which students pay for in company-taught "Introduction to ." courses. However, with this book, the student avoids paying tuition, learns at times of his own convenience, and can compare the different programs. In this book, load flow (power-flow) and short-circuit analyses are done on a small steady-state three-phase power system with manual methods. Then, each program is used to carry out the same analyses. Since in practice, three-phase systems are the most often analyzed, only three-phase systems will be considered in this book. The DC and single-phase capabilities of the programs will not be considered. The person using this book should already have an analytical electrical background. Academically, he should be educated to at least the level of a university two-year electrical engineering technology program. This item is printed on demand. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days.

Condición: New. Print on Demand pp. 156 Illus.

Condición: New. Print on Demand pp. 156.

Condición: New. PRINT ON DEMAND pp. 156.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The object of this book is to teach the beginner the basics of three popular power system analysis programs. These programs are designed to simulate and analyze electrical power generation and distribution systems in normal operation and in short-circuit. The programs also have many add-on options like protection selection, arc flash analysis, transmission line sag & tension, raceway calculations, transient motor starting, etc. The programs have Demo (demonstration or trial) versions to allow people to tryout and learn about them. This book provides the engineer and technologist with information needed to use the Demo versions of SKM, ETAP, and EDSA for load flow and short-circuit analysis. The beginner learns how to use them on a small, but realistic, three-phase power system. The information gained is similar to that which students pay for in company-taught 'Introduction to .' courses. However, with this book, the student avoids paying tuition, learns at times of his own convenience, and can compare the different programs.In this book, load flow (power-flow) and short-circuit analyses are done on a small steady-state three-phase power system with manual methods. Then, each program is used to carry out the same analyses. Since in practice, three-phase systems are the most often analyzed, only three-phase systems will be considered in this book. The DC and single-phase capabilities of the programs will not be considered.The person using this book should already have an analytical electrical background. Academically, he should be educated to at least the level of a university two-year electrical engineering technology program. 156 pp. Englisch.

Paperback. Condición: new. Paperback. The object of this book is to teach the beginner the basics of three popular power system analysis programs. These programs are designed to simulate and analyze electrical power generation and distribution systems in normal operation and in short-circuit. The programs also have many add-on options like protection selection, arc flash analysis, transmission line sag & tension, raceway calculations, transient motor starting, etc. The programs have Demo (demonstration or trial) versions to allow people to tryout and learn about them. This book provides the engineer and technologist with information needed to use the Demo versions of SKM, ETAP, and EDSA for load flow and short-circuit analysis. The beginner learns how to use them on a small, but realistic, three-phase power system. The information gained is similar to that which students pay for in company-taught "Introduction to ." courses. However, with this book, the student avoids paying tuition, learns at times of his own convenience, and can compare the different programs. In this book, load flow (power-flow) and short-circuit analyses are done on a small steady-state three-phase power system with manual methods. Then, each program is used to carry out the same analyses. Since in practice, three-phase systems are the most often analyzed, only three-phase systems will be considered in this book. The DC and single-phase capabilities of the programs will not be considered. The person using this book should already have an analytical electrical background. Academically, he should be educated to at least the level of a university two-year electrical engineering technology program. The object of this book is to teach the beginner the basics of three popular power system analysis programs. These programs are designed to simulate and analyze electrical power generation and distribution systems in normal operation and in short-circuit. The programs also have many add-on options like protection selection, arc flash analysis, transmission line sag & tension, raceway calculations, transient motor starting, etc. The programs have Demo (demonstration or trial) versions to allow people to tryout and learn about them. This book provides the engineer and technologist with information needed to use the Demo versions of SKM, ETAP, and EDSA for load flow and short-circuit analysis. The beginner learns how to use them on a small, but realistic, three-phase power system. The information gained is similar to that which students pay for in company-taught "Introduction to ." courses. However, with this book, the student avoids paying tuition, learns at times of his own convenience, and can compare the different programs. In this book, load flow (power-flow) and short-circuit analyses are done on a small steady-state three-phase power system with manual methods. Then, each program is used to carry out the same analyses. Since in practice, three-phase systems are the most often analyzed, only three-phase systems will be considered in this book. The DC and single-phase capabilities of the programs will not be considered. The person using this book should already have an analytical electrical background. Academically, he should be educated to at least the level of a university two-year electrical engineering technology program. This item is printed on demand. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Paperback. Condición: new. Paperback. The object of this book is to teach the beginner the basics of three popular power system analysis programs. These programs are designed to simulate and analyze electrical power generation and distribution systems in normal operation and in short-circuit. The programs also have many add-on options like protection selection, arc flash analysis, transmission line sag & tension, raceway calculations, transient motor starting, etc. The programs have Demo (demonstration or trial) versions to allow people to tryout and learn about them. This book provides the engineer and technologist with information needed to use the Demo versions of SKM, ETAP, and EDSA for load flow and short-circuit analysis. The beginner learns how to use them on a small, but realistic, three-phase power system. The information gained is similar to that which students pay for in company-taught "Introduction to ." courses. However, with this book, the student avoids paying tuition, learns at times of his own convenience, and can compare the different programs. In this book, load flow (power-flow) and short-circuit analyses are done on a small steady-state three-phase power system with manual methods. Then, each program is used to carry out the same analyses. Since in practice, three-phase systems are the most often analyzed, only three-phase systems will be considered in this book. The DC and single-phase capabilities of the programs will not be considered. The person using this book should already have an analytical electrical background. Academically, he should be educated to at least the level of a university two-year electrical engineering technology program. The object of this book is to teach the beginner the basics of three popular power system analysis programs. These programs are designed to simulate and analyze electrical power generation and distribution systems in normal operation and in short-circuit. The programs also have many add-on options like protection selection, arc flash analysis, transmission line sag & tension, raceway calculations, transient motor starting, etc. The programs have Demo (demonstration or trial) versions to allow people to tryout and learn about them. This book provides the engineer and technologist with information needed to use the Demo versions of SKM, ETAP, and EDSA for load flow and short-circuit analysis. The beginner learns how to use them on a small, but realistic, three-phase power system. The information gained is similar to that which students pay for in company-taught "Introduction to ." courses. However, with this book, the student avoids paying tuition, learns at times of his own convenience, and can compare the different programs. In this book, load flow (power-flow) and short-circuit analyses are done on a small steady-state three-phase power system with manual methods. Then, each program is used to carry out the same analyses. Since in practice, three-phase systems are the most often analyzed, only three-phase systems will be considered in this book. The DC and single-phase capabilities of the programs will not be considered. The person using this book should already have an analytical electrical background. Academically, he should be educated to at least the level of a university two-year electrical engineering technology program. This item is printed on demand. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. KlappentextThe object of this book is to teach the beginner the basics of three popular power system analysis programs. These programs are designed to simulate and analyze electrical power generation and distribution systems in normal op.

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The object of this book is to teach the beginner the basics of three popular power system analysis programs. These programs are designed to simulate and analyze electrical power generation and distribution systems in normal operation and in short-circuit. The programs also have many add-on options like protection selection, arc flash analysis, transmission line sag & tension, raceway calculations, transient motor starting, etc. The programs have Demo (demonstration or trial) versions to allow people to tryout and learn about them. This book provides the engineer and technologist with information needed to use the Demo versions of SKM, ETAP, and EDSA for load flow and short-circuit analysis. The beginner learns how to use them on a small, but realistic, three-phase power system. The information gained is similar to that which students pay for in company-taught 'Introduction to .' courses. However, with this book, the student avoids paying tuition, learns at times of his own convenience, and can compare the different programs.In this book, load flow (power-flow) and short-circuit analyses are done on a small steady-state three-phase power system with manual methods. Then, each program is used to carry out the same analyses. Since in practice, three-phase systems are the most often analyzed, only three-phase systems will be considered in this book. The DC and single-phase capabilities of the programs will not be considered.The person using this book should already have an analytical electrical background. Academically, he should be educated to at least the level of a university two-year electrical engineering technology program.Libri GmbH, Europaallee 1, 36244 Bad Hersfeld 156 pp. Englisch.

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The object of this book is to teach the beginner the basics of three popular power system analysis programs. These programs are designed to simulate and analyze electrical power generation and distribution systems in normal operation and in short-circuit. The programs also have many add-on options like protection selection, arc flash analysis, transmission line sag & tension, raceway calculations, transient motor starting, etc. The programs have Demo (demonstration or trial) versions to allow people to tryout and learn about them. This book provides the engineer and technologist with information needed to use the Demo versions of SKM, ETAP, and EDSA for load flow and short-circuit analysis. The beginner learns how to use them on a small, but realistic, three-phase power system. The information gained is similar to that which students pay for in company-taught 'Introduction to .' courses. However, with this book, the student avoids paying tuition, learns at times of his own convenience, and can compare the different programs.In this book, load flow (power-flow) and short-circuit analyses are done on a small steady-state three-phase power system with manual methods. Then, each program is used to carry out the same analyses. Since in practice, three-phase systems are the most often analyzed, only three-phase systems will be considered in this book. The DC and single-phase capabilities of the programs will not be considered.The person using this book should already have an analytical electrical background. Academically, he should be educated to at least the level of a university two-year electrical engineering technology program.

Taschenbuch. Condición: Neu. SKM, ETAP, & EDSA Power System Analysis Tutorials | Stephen Philip Tubbs | Taschenbuch | Kartoniert / Broschiert | Englisch | 2009 | Stephen Philip Tubbs | EAN 9780981975306 | Verantwortliche Person für die EU: Libri GmbH, Europaallee 1, 36244 Bad Hersfeld, gpsr[at]libri[dot]de | Anbieter: preigu Print on Demand.