9780412384806 - manufacturing systems: an introduction to the technologies de williams, d.j. (22 resultados)
- Tapa blanda
Librería: WeBuyBooks, Rossendale, LANCS, Reino UnidoWeBuyBooks
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 1,66
Envío por EUR 7,98Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: Very Good. Most items will be dispatched the same or the next working day. A copy that has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
- Tapa blanda
Librería: Bahamut Media, Reading, Reino UnidoBahamut Media
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 4,24
Envío por EUR 8,10Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: Very Good. This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are… not satisfied. See all our books here, order more than 1 book and get discounted shipping.
- Tapa blanda
Librería: AwesomeBooks, Wallingford, Reino UnidoAwesomeBooks
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 11,93
Envío por EUR 5,79Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: Very Good. This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisf…ied. See all our books here, order more than 1 book and get discounted shipping. .
- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 56,29
Envío por EUR 2,31Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.
- Tapa blanda
Librería: BargainBookStores, Grand Rapids, MI, Estados Unidos de AmericaBargainBookStores
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 58,68
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 5 disponibles
Paperback or Softback. Condición: New. Manufacturing Systems: An Introduction to the Technologies. Book.
- Tapa blanda
Librería: California Books, Miami, FL, Estados Unidos de AmericaCalifornia Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 61,33
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.
- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 63,90
Envío por EUR 2,31Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: As New. Unread book in perfect condition.
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 60,72
Envío por EUR 13,90Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa blanda
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 60,71
Envío por EUR 17,41Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.
- Tapa blanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 78,98
Envío por EUR 3,49Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 228.
- Tapa blanda
Librería: Kennys Bookshop and Art Galleries Ltd., Galway, GY, IrlandaKennys Bookshop and Art Galleries Ltd.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 68,42
Envío por EUR 10,50Se envía de Irlanda a Estados Unidos de AmericaCantidad disponible: 15 disponibles
Condición: New. Intended as a `primer' in manufacturing systems, this book concentrates primarily on the technology that is applied on the shop floor to automate the manufacturing process. Num Pages: 224 pages, biography. BIC Classification: PD. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (U…U) Undergraduate. Dimension: 244 x 170 x 12. Weight in Grams: 401. . 1988. New ed. Paperback. . . . .
- Tapa blanda
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 66,87
Envío por EUR 17,41Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: As New. Unread book in perfect condition.
- Tapa blanda
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 79,37
Envío por EUR 11,61Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: Brand New. 224 pages. 9.60x6.60x0.47 inches. In Stock.
- Tapa blanda
Librería: Kennys Bookstore, Olney, MD, Estados Unidos de AmericaKennys Bookstore
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 85,92
Envío por EUR 9,19Se envía dentro de Estados Unidos de AmericaCantidad disponible: 15 disponibles
Condición: New. Intended as a `primer' in manufacturing systems, this book concentrates primarily on the technology that is applied on the shop floor to automate the manufacturing process. Num Pages: 224 pages, biography. BIC Classification: PD. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (U…U) Undergraduate. Dimension: 244 x 170 x 12. Weight in Grams: 401. . 1988. New ed. Paperback. . . . . Books ship from the US and Ireland.
- Tapa blanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 48,37
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Kartoniert / Broschiert. Condición: New.
Más imágenes- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 50,25
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Manufacturing Systems | An introduction to the technologies | D. J. Williams | Taschenbuch | xvi | Englisch | 1988 | Springer | EAN 9780412384806 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu….
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 58,39
Envío por EUR 62,01Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - It is essential for the traditionally industrialised countries to innovate in manu facturing to survive in the increasingly competitive world marketplace. This challenge coupled with the increasing application of computers has led to significant ch…anges in the techniques applied in manufacturing. This book seeks to introduce those technologies that are being applied in discrete parts manufacturing. In the technIcal press there have been many phrases and acronyms coined to describe these technologies including numerical control (NC), machining centres, computer aided manufacture (CAM), computer integrated manufacture (CIM), simulation, robotics, flexible manufacturing systems (FMS), automatic assembly, factory automation, Kanban, just in time (JIT) , manufacturing automation protocol (MAP), advanced manufacturing technology (AMT), etc. The book is intended to introduce senior undergraduates, postgraduate students and practising engineers to the principles of these individual technologies and their integration into complete, automated, programmable manufacturing facilities and systems. It is hoped that this will allow the reader to have a critical perspective of the market place and potential solutions to his own current or future problems. It is also intended to indicate how the complete manufacturing facility can be viewed as a system. The book does not address the related areas of Computer Aided Design (CAD), scheduling, production control and current speculative research at any significant level. It is impossible to do justice, in this short book, to such large subject areas which, without doubt, demand books in their own right. A book such as this is still necessarily wide-ranging and occasionally superficial.
- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 53,49
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -It is essential for the traditionally industrialised countries to innovate in manu facturing to survive in the increasingly competitive world marketplace. This challenge coupled with the increasing application of computers has led t…o significant changes in the techniques applied in manufacturing. This book seeks to introduce those technologies that are being applied in discrete parts manufacturing. In the technIcal press there have been many phrases and acronyms coined to describe these technologies including numerical control (NC), machining centres, computer aided manufacture (CAM), computer integrated manufacture (CIM), simulation, robotics, flexible manufacturing systems (FMS), automatic assembly, factory automation, Kanban, just in time (JIT) , manufacturing automation protocol (MAP), advanced manufacturing technology (AMT), etc. The book is intended to introduce senior undergraduates, postgraduate students and practising engineers to the principles of these individual technologies and their integration into complete, automated, programmable manufacturing facilities and systems. It is hoped that this will allow the reader to have a critical perspective of the market place and potential solutions to his own current or future problems. It is also intended to indicate how the complete manufacturing facility can be viewed as a system. The book does not address the related areas of Computer Aided Design (CAD), scheduling, production control and current speculative research at any significant level. It is impossible to do justice, in this short book, to such large subject areas which, without doubt, demand books in their own right. A book such as this is still necessarily wide-ranging and occasionally superficial. 228 pp. Englisch.
- Tapa blanda
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 79,47
Envío por EUR 7,54Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand pp. 228 67:B&W 6.69 x 9.61 in or 244 x 170 mm (Pinched Crown) Perfect Bound on White w/Gloss Lam.
- Tapa blanda
- Impresión bajo demanda
Librería: THE SAINT BOOKSTORE, Southport, Reino UnidoTHE SAINT BOOKSTORE
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 68,92
Envío por EUR 17,93Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Paperback / softback. Condición: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days.
- Tapa blanda
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 79,66
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND pp. 228.
- Tapa blanda
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 53,49
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -It is essential for the traditionally industrialised countries to innovate in manu facturing to survive in the increasingly competitive world marketplace. This challenge coupled with the increasing application of computers has led to si…gnificant changes in the techniques applied in manufacturing. This book seeks to introduce those technologies that are being applied in discrete parts manufacturing. In the technIcal press there have been many phrases and acronyms coined to describe these technologies including numerical control (NC), machining centres, computer aided manufacture (CAM), computer integrated manufacture (CIM), simulation, robotics, flexible manufacturing systems (FMS), automatic assembly, factory automation, Kanban, just in time (JIT) , manufacturing automation protocol (MAP), advanced manufacturing technology (AMT), etc. The book is intended to introduce senior undergraduates, postgraduate students and practising engineers to the principles of these individual technologies and their integration into complete, automated, programmable manufacturing facilities and systems. It is hoped that this will allow the reader to have a critical perspective of the market place and potential solutions to his own current or future problems. It is also intended to indicate how the complete manufacturing facility can be viewed as a system. The book does not address the related areas of Computer Aided Design (CAD), scheduling, production control and current speculative research at any significant level. It is impossible to do justice, in this short book, to such large subject areas which, without doubt, demand books in their own right. A book such as this is still necessarily wide-ranging and occasionally superficial.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 228 pp. Englisch.
