Young lyman j (12 resultados)
Idioma: Inglés
Editorial: Independently published, 2026
Serie: Learning Express Series, Libro 11 de 9. Libro 11 de 9 - Learning Express Series
- Tapa blanda
Librería: PBShop.store UK, Fairford, GLOS, Reino UnidoPBShop.store UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 29,28
Envío por EUR 4,88Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.
Idioma: Inglés
Editorial: Independently published 2021-04-28, 2021
Serie: Salt City Genre Writers Anthologies, Libro 2 de 4. Libro 2 de 4 - Salt City Genre Writers Anthologies
- Tapa blanda
Librería: Chiron Media, Wallingford, Reino UnidoChiron Media
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 16,27
Envío por EUR 18,17Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Paperback. Condición: New.
Perchance to Dream: The Salt City Genre Writers 2021 Chapter Anthology (Salt City Genre Writers Anthologies)
Young, Bryan; Murtagh, Sarah; Lassen, E K; Ward, Cassidy; Luft, Terra; Lyman, Missy; Tolentino, Rufo; Halleck, R G; Zarnofsky, J E; Hatch, Aren K.
Idioma: Inglés
Editorial: Independently published, 2021
Serie: Salt City Genre Writers Anthologies, Libro 2 de 4. Libro 2 de 4 - Salt City Genre Writers Anthologies
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 21,50
Envío por EUR 14,05Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
Más imágenesEditorial: Government Printing Office, 1898
- Tapa dura
Librería: Boyd Used & Rare Books, Portland, OR, Estados Unidos de AmericaBoyd Used & Rare Books
Contactar con el vendedorVendedor de 5 estrellasMiembro de asociación: CBA
Condición: Usado - Aceptable
EUR 19,91
Envío por EUR 6,15Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. Condición: Good. No Jacket. Olive green cloth with gilt lettering on spine. Shows general wear and soiling, but overall in good condition. Faint mustiness. 1183 pages. President William McKinley's message to Congress, dated December 6,1897 (a few months before the beginning of the Spanish-American War), and the report…s of the Secretary of the Treasury (Lyman J. Gage), Secretary of War (Russell A. Alger), Secretary of the Navy (John D. Long), Secretary of the Interior (Cornelius N. Bliss), Postmaster-General (James A. Gary), Secretary of Agriculture (James Wilson), the Librarian of Congress (John Russell Young), and the U.S. Civil Service Commission.
JOHNNY - N° 2 - Avril 1970 [Johnny Hazard (Frank Robbins) / Alley Oop (V.T. Hamlin) / Hud le spécialiste (Jijé, Philipp) / La petite Annie (Darrell McClure) / Le Roi de la prairie (Fran Striker) / Archie Pott (T.K. Ryan) / Le père Lacloche (C.D. Russell) / L'Agent Secret X 9 (Al Williamson, Archie Goodwin) / Red Barry (Will Gould) / Brick Bradford (William Ritt, Clarence Gray) / Prince Vaillant (Harold R. Foster) / Raoul et Gaston (Lyman Young, Tom Massey) / Terres Jumelles (Oskar Lebeck) / Gérald Norton (Ken Bald, Jerry Brondfield) / Smokey Tover (Bill Holman) / Le Tour du Monde (R.J. Scott) / Spooky (Fenwick Flooky, Rigobert) / Sortilèges (J. Mersant, J. Tosan) / Le Fantôme du Bengale (Lee Falk)].
BD / Johnny / Ken BALD, Jerry BRONFIELD, Lee FALK, Fenwick FLOOKY, Harold R. FOSTER, Archie GOODWIN, Will GOULD, Clarence GRAY, V. T. HAMLIN, Bill HOLMAN, JIJÉ, Oskar LEBECK, Darrell McCLURE, Tom MASSEY, J. MERSANT, PHILIPP, RIGOBERT, William RITT, Frank ROBBINS, C. D. RUSSELL, T. K. RYAN, R. J. SCOTT, Fran STRIKER, J. TOSAN, A. WILLIAMS, Al WILLIAMSON, Lyman YOUNG.
Librería: Jean-Paul TIVILLIER, MEYS, FranciaJean-Paul TIVILLIER
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado
EUR 1,50
Envío por EUR 23,00Se envía de Francia a Estados Unidos de AmericaCantidad disponible: 1 disponibles
PARIS, Serdim-Éditions [29, rue de la Boétie /// Imprimerie Molière, Lyon-Paris] - 1970 - FA.40x28,5 cm - Fascicule en un cahier agrafé au dos; journal de 24 pages; bandes dessinées en noir et en couleurs. (Collection Johnny - Le journal de l'âge d'or - N° 2 - Avril 1970 - Hebdomadaire - Paraît tous les Lundis - 2 Frs - Directeu…rs de Publication: J. Tosan, A. Schwarz). Pliure horizontale. Bon état général. Français Journal.
Perchance to Dream: The Salt City Genre Writers 2021 Chapter Anthology (Salt City Genre Writers Anthologies)
Young, Bryan; Murtagh, Sarah; Lassen, E K; Ward, Cassidy; Luft, Terra; Lyman, Missy; Tolentino, Rufo; Halleck, R G; Zarnofsky, J E; Hatch, Aren K.
Idioma: Inglés
Editorial: Independently published, 2021
Serie: Salt City Genre Writers Anthologies, Libro 2 de 4. Libro 2 de 4 - Salt City Genre Writers Anthologies
- Tapa blanda
- Impresión bajo demanda
Librería: California Books, Miami, FL, Estados Unidos de AmericaCalifornia Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 21,72
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Print on Demand.
Perchance to Dream The Salt City Genre Writers 2021 Chapter Anthology
Young, Bryan; Murtagh, Sarah; Lassen, E K; Ward, Cassidy; Luft, Terra; Lyman, Missy; Tolentino, Rufo; Halleck, R G; Zarnofsky, J E; Hatch, Aren K.
Idioma: Inglés
Editorial: Independently Published, 2021
Serie: Salt City Genre Writers Anthologies, Libro 2 de 4. Libro 2 de 4 - Salt City Genre Writers Anthologies
- Tapa blanda
- Impresión bajo demanda
Librería: PBShop.store US, Wood Dale, IL, Estados Unidos de AmericaPBShop.store US
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 22,45
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
PAP. Condición: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.
Idioma: Inglés
Editorial: Independently Published Jun 2026, 2026
Serie: Learning Express Series, Libro 11 de 9. Libro 11 de 9 - Learning Express Series
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 39,47
Envío por EUR 62,12Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. Neuware.
Perchance to Dream The Salt City Genre Writers 2021 Chapter Anthology
Young, Bryan; Murtagh, Sarah; Lassen, E K; Ward, Cassidy; Luft, Terra; Lyman, Missy; Tolentino, Rufo; Halleck, R G; Zarnofsky, J E; Hatch, Aren K.
Idioma: Inglés
Editorial: Independently Published, 2021
Serie: Salt City Genre Writers Anthologies, Libro 2 de 4. Libro 2 de 4 - Salt City Genre Writers Anthologies
- Tapa blanda
- Impresión bajo demanda
Librería: PBShop.store UK, Fairford, GLOS, Reino UnidoPBShop.store UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 21,39
Envío por EUR 4,88Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
PAP. Condición: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.
The Oxford Handbook of Early Christian Studies:
Edited by Susan Ashbrook Harvey and David Hunter; Contributing authors: William Adler, Lewis Ayres, Paul Blowers, David Brakke, Sebastian Brock, Francine Cardman, Elizabeth Clark, Brian Daley, Harold Drake, Hubertus Drobner, Mark Edwards, Everett Ferguson, Allan Fitzgerald, Georgia Frank, J. William Harmless, Susan Ashbrook Harvey, Michael Holmes, Mark Humphries, David Hunter, Andrew Jacobs, Robin Jensen, Maxwell Johnson, Joseph Kelly, Karen King, Ross Shepard Kraemer, Rebecca Krawiec, Mathijs Lamberigts, Samuel Lieu, J. Rebecca Lyman, Antti Marjanen, Ralph Mathisen, Wendy Mayer, John McGuckin, RIchard Price, Andrew Radde-Gallwitz, Eric Rebillard, Michael Roberts, Jeanne-Nicole Saint-Laurent, Michele Salzman, Daniel Sheerin, Stephen Shoemaker, Columba Stewart, William Tabbernee, Karen Jo Torjesen, Raymond Van Dam, Lucas Van Rompay, Mark Vessey, and Frances Young.
Idioma: Inglés
Editorial: Oxford University Press 2008, 2011, Oxford, England / New York, New York, 2008
- Tapa dura
Librería: Andover Books and Antiquities, Andover, MA, Estados Unidos de AmericaAndover Books and Antiquities
Contactar con el vendedorVendedor de 3 estrellasCondición: Usado
EUR 195,45
Envío por EUR 11,42Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. xxvii, 1020 pp. Oxford Handbooks. Very good condition; a few touches of wear on edges of covers.
Idioma: Inglés
Editorial: Independently published, 2026
Serie: Learning Express Series, Libro 11 de 9. Libro 11 de 9 - Learning Express Series
- Tapa blanda
- Impresión bajo demanda
Librería: California Books, Miami, FL, Estados Unidos de AmericaCalifornia Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 28,95
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Print on Demand.
Idioma: Inglés
Editorial: Independently Published, 2026
Serie: Learning Express Series, Libro 11 de 9. Libro 11 de 9 - Learning Express Series
- Tapa blanda
- Impresión bajo demanda
Librería: CitiRetail, Stevenage, Reino UnidoCitiRetail
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 33,20
Envío por EUR 43,39Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: new. Paperback. Are you trying to finally move from basic CNC experimentation to confident, professional-level design and machining results? Or maybe you already own a CNC router but still find yourself wondering why your toolpaths don't always come out the way you imagined?What if the real issue isn't your… machine. but your workflow inside VCarve Pro?And here's a more important question are you truly using its full potential, or are you only scratching the surface of what it can do?This book, Mastering VCarve Pro 2026, is written to take you step-by-step through the entire CNC design journey in a way that feels practical, clear, and real-world focused. But let's be honest how often have you followed tutorials that left you more confused once you tried your own project?Have you ever asked yourself: Why does my toolpath behave differently than expected?Why do my 2D designs not translate cleanly into cutting results?How do professionals consistently produce clean, accurate 3D carvings?What separates hobby CNC work from production-level output?If these questions sound familiar, then you're exactly where you need to be.This is not just another software walkthrough.It is a structured, practical guide that helps you understand why things work, not just how to click buttons.Inside, you are guided through: Designing with clarity and precision so your ideas translate cleanly into CNC-ready filesBuilding reliable toolpaths that reduce errors, wasted material, and machine frustrationUnderstanding how 2D and 3D routing actually behave in real machining environmentsCreating real-world projects that reflect professional CNC workflows, not just theoryBut here's something worth thinking about are you tired of wasting material on trial and error? Or guessing your way through settings hoping everything works out?What if you could approach every project with confidence, knowing exactly how your design will behave once it reaches the machine?Imagine this for a moment: What would change if your CNC projects consistently came out clean, accurate, and exactly as designed?How would it feel to stop second-guessing toolpaths and start producing work you're actually proud to show or sell?That's the goal of this guide to help you bridge the gap between confusion and control.Whether you're a beginner trying to understand the fundamentals or an intermediate user aiming to refine your workflow, this book helps you move toward real CNC mastery through structured thinking, not guesswork.So ask yourself again are you ready to stop struggling with trial-and-error workflows and finally start building with precision and confidence?If the answer is yes, then this is your next step.Get your copy today and start mastering CNC design, toolpaths, and real-world routing projects with clarity and confidence. This item is printed on demand. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.
