Yoshiro yamada (30 resultados)

Condición: As New. Like New condition. Spanish and Japanese. Book in slipcase. Slipcase Very Good. A near perfect copy that may have very minor cosmetic defects.

Tankobon Hardcover. Condición: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.

Condición: Fine. KOS02400267.

Condición: Fine. KOS01700317.

Condición: Fine. Number of pages: 518p Size: 22cm.

Condición: Fine. The book is in fine condition.

Condición: Fine. Number of pages: 257p Size: A5 Number of books: 1 book.

Condición: Fine. The book is in fine condition.

Condición: New. In English.

Condición: New. In English.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Materials for springs is basically intended for engineers related to spring materials and technologies who graduated from metallurgical or mechanical engineering courses in technical high school, or in other higher engineering schools, as well as those who are related to the purchase or sales of spring materials.The first chapter introduces into the fundamental selection processes of spring materials including the information sources on materials database. It is followed by the basic mechanisms and theories of spring failures such as fatigue fracture, creep/stress relaxation and stress corrosion cracking of metallic materials. The focuses of the second chapter is put on ferrous and non-ferrous metallic materials, including some materials developed in these two decades, such as high strength automobile suspension steels etc. In the third and fourth chapters, polymer materials, FRP (Fiber Reinforced Plastics), ceramics and C/C composite materials are the main subject respectively. In the fifth chapter, lists of Japanese spring material manufacturers and their material grades being produced, comparisons of spring materials in the Japanese Industrial Standards with some other foreign standards, etc, are summarized.…

Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Materials for springs is basically intended for engineers related to spring materials and technologies who graduated from metallurgical or mechanical engineering courses in technical high school, or in other higher engineering schools, as well as those who are related to the purchase or sales of spring materials.The first chapter introduces into the fundamental selection processes of spring materials including the information sources on materials database. It is followed by the basic mechanisms and theories of spring failures such as fatigue fracture, creep/stress relaxation and stress corrosion cracking of metallic materials. The focuses of the second chapter is put on ferrous and non-ferrous metallic materials, including some materials developed in these two decades, such as high strength automobile suspension steels etc. In the third and fourth chapters, polymer materials, FRP (Fiber Reinforced Plastics), ceramics and C/C composite materials are the main subject respectively. In the fifth chapter, lists of Japanese spring material manufacturers and their material grades being produced, comparisons of spring materials in the Japanese Industrial Standards with some other foreign standards, etc, are summarized.…

Taschenbuch. Condición: Neu. Materials for Springs | Yoshiro Yamada | Taschenbuch | xv | Englisch | 2011 | Springer Berlin | EAN 9783642093036 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Condición: New. pp. 396.

Condición: Fine. Number of books: 1 book.

Paperback. Condición: Brand New. 377 pages. 9.25x6.10x0.90 inches. In Stock.

Hardcover. Condición: Brand New. 1st edition. 377 pages. 9.50x6.50x0.50 inches. In Stock.

Hardcover. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: Fine. Used book that is in almost brand-new condition. May contain a remainder mark. Better World Books: Buy Books. Do Good.

Condición: Fine. Number of books: 1 book.

Condición: new. Questo è un articolo print on demand.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -'Materials for springs' is basically intended for engineers related to spring materials and technologies who graduated from metallurgical or mechanical engineering course in technical high school, or in other higher engineering schools, as well as those who are related to purchases or sales of spring materials. This book is the first comprehensive treatment in this specific topic. It is written by experts of the JSSE (Japan Society of Spring Engineers). 396 pp. Englisch.…

Buch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -'Materials for springs' is basically intended for engineers related to spring materials and technologies who graduated from metallurgical or mechanical engineering course in technical high school, or in other higher engineering schools, as well as those who are related to purchases or sales of spring materials. This book is the first comprehensive treatment in this specific topic. It is written by experts of the JSSE (Japan Society of Spring Engineers). 396 pp. Englisch.…

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Only comprehensive treatment in this specific topicWritten by experts of the JSSE (Japan Society of Spring Engineers), strongly woven with the Spring producing industryDr. Yoshiro Yamada: - Master of Engineering Degree from the Grad. …

Gebunden. Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Only comprehensive treatment in this specific topicWritten by experts of the JSSE (Japan Society of Spring Engineers), strongly woven with the Spring producing industryDr. Yoshiro Yamada: - Master of Engineering Degree from the Grad. …

Buch. Condición: Neu. Materials for Springs | Yoshiro Yamada | Buch | xv | Englisch | 2007 | Springer Berlin Heidelberg | EAN 9783540738114 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu Print on Demand.…

Buch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Materials for springs is basically intended for engineers related to spring materials and technologies who graduated from metallurgical or mechanical engineering courses in technical high school, or in other higher engineering schools, as well as those who are related to the purchase or sales of spring materials.The first chapter introduces into the fundamental selection processes of spring materials including the information sources on materials database. It is followed by the basic mechanisms and theories of spring failures such as fatigue fracture, creep/stress relaxation and stress corrosion cracking of metallic materials.The focuses of the second chapter is put on ferrous and non-ferrous metallic materials, including some materials developed in these two decades, such as high strength automobile suspension steels etc.In the third and fourth chapters, polymer materials, FRP (Fiber Reinforced Plastics), ceramics and C/C composite materials are the main subject respectively.In the fifth chapter, lists of Japanese spring material manufacturers and their material grades being produced, comparisons of spring materials in the Japanese Industrial Standards with some other foreign standards, etc, are summarized.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 396 pp. Englisch.…

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Materials for springs is basically intended for engineers related to spring materials and technologies who graduated from metallurgical or mechanical engineering courses in technical high school, or in other higher engineering schools, as well as those who are related to the purchase or sales of spring materials.The first chapter introduces into the fundamental selection processes of spring materials including the information sources on materials database. It is followed by the basic mechanisms and theories of spring failures such as fatigue fracture, creep/stress relaxation and stress corrosion cracking of metallic materials.The focuses of the second chapter is put on ferrous and non-ferrous metallic materials, including some materials developed in these two decades, such as high strength automobile suspension steels etc.In the third and fourth chapters, polymer materials, FRP (Fiber Reinforced Plastics), ceramics and C/C composite materials are the main subject respectively.In the fifth chapter, lists of Japanese spring material manufacturers and their material grades being produced, comparisons of spring materials in the Japanese Industrial Standards with some other foreign standards, etc, are summarized.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 396 pp. Englisch.…

Condición: New. PRINT ON DEMAND pp. 396.

Condición: New. Print on Demand pp. 396 336 Illus.