Terzi sergio (105 resultados)

Condición: New.

Condición: As New. Unread book in perfect condition.

Condición: New.

Condición: As New. Unread book in perfect condition.

Condición: New. In English.

Paperback. Condición: New.

Condición: New. 1st ed. 2019 edition NO-PA16APR2015-KAP.

Paperback. Condición: new. Paperback. This open access book summarizes research being pursued within the CIRC-UITS project, funded by the European Union community under the Horizon Europe programme, the goal of which is to demonstrate the improvement of circularity of automotive and mass electronics sectors by recovering materials from waste products, as well as supporting the reuse and remanufacturing of electronic components into new (high value) products in these sectors. To this aim, the CIRC-UITS project wants to unlock the full potentials/benefits of circular practices through digital technologies. Specifically, within the project, digital twins, augmented reality, web platforms and simulation tools have been developed. Another important objective is the increase of resource efficiency/independency and reduction of the negative environmental footprint of electronics production processes through circular behaviors. To this aim, within the CIRC-UITS project a set of methodologies and decision-support tools for the assessment and advisory of sustainability and circularity performances have been developed. Another important objective is the improvement/standardization of information/data sharing/exchange among industrial leaders involved in the same and/or similar value chain. To this aim, the CIRC-UITS projects consortium has been actively involved in the development of two CEN Workshop Agreements, one about the implementation of a Digital Product Passport (DPP) dedicated to electronic components and another dedicated to the application of the standard EN 45554 in the automotive industry. Finally, the CIRC-UITS project demonstrated the benefits coming from the adoption of a Digital Circular Economy through 4 pilots, one on Electronic Control Units (ECU), one on Tire Pressure Monitoring Sensors (TPMS), one on In-Mold Electronics (IME) and one on sorting of obsolete Printed Circuit Boards (PCB) from washing machines. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Paperback. Condición: Brand New. 156 pages. 9.25x6.10x0.32 inches. In Stock.

Condición: New. In English.

Condición: New.

Condición: Acceptable. Readable, but has significant damage / tears. Has a remainder mark. paperback Used - Acceptable 2023.

Condición: As New. Unread book in perfect condition.

Condición: New.

paperback. Condición: Like New. Most items will be dispatched the same or the next working day. An apparently unread copy in perfect condition. Dust cover is intact with no nicks or tears. Spine has no signs of creasing. Pages are clean and not marred by notes or folds of any kind.

Condición: New.

Condición: New.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This open access book summarizes research being pursued within the Manutelligence project, the goal of which is to help enterprises develop smart, social and flexible products with high value added services. Manutelligence has improved Product and Service Design by developing suitable models and methods, and connecting them through a modular, collaborative and secure ICT Platform.The use of real data collected in real time by Internet of Things (IoT) technologies underpins the design of product-service systems and makes it possible to monitor them throughout their life cycle. Available data allows costs and sustainability issues to be more accurately measured and simulated in the form of Life Cycle Cost (LCC) and Life Cycle Assessment (LCA). Analysing data from IoT systems and sharing LCC and LCA information via the ICT Platform can help to accelerate the design of product-service systems, reduce costs and better understand customer needs.Industrial partners involved inManutelligence provide a clear overview of the project's outcomes, and demonstrate how its technological solutions can be used to improve the design of product-service systems and the management of product-service life cycles. …

Paperback. Condición: Brand New. 153 pages. 9.25x6.10x0.39 inches. In Stock.

Paperback. Condición: Brand New. 130 pages. 9.26x6.11x9.25 inches. In Stock.

Condición: New.

Cartonato con sovracoperta. Presentazione di Davide Lajolo. Numero di tavole: 0 pp.161 altezza 0 larghezza 0 Esemplare in buone condizioni.Copertina con ingiallimento, macchie di polvere e segni di usura ai bordi e agli angoli.Pagine brunite ai bordi. Cancellatura del prezzo a biro. Prezzo scritto a biro nera.Testo in Lingua Italiana.…

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This open access book summarizes research being pursued within the CIRC-UITS project, funded by the European Union community under the Horizon Europe programme, the goal of which is to demonstrate the improvement of circularity of automotive and mass electronics sectors by recovering materials from waste products, as well as supporting the reuse and remanufacturing of electronic components into new (high value) products in these sectors. To this aim, the CIRC-UITS project wants to unlock the full potentials/benefits of circular practices through digital technologies. Specifically, within the project, digital twins, augmented reality, web platforms and simulation tools have been developed. Another important objective is the increase of resource efficiency/independency and reduction of the negative environmental footprint of electronics production processes through circular behaviors. To this aim, within the CIRC-UITS project a set of methodologies and decision-support tools for the assessment and advisory of sustainability and circularity performances have been developed. Another important objective is the improvement/standardization of information/data sharing/exchange among industrial leaders involved in the same and/or similar value chain. To this aim, the CIRC-UITS project s consortium has been actively involved in the development of two CEN Workshop Agreements, one about the implementation of a Digital Product Passport (DPP) dedicated to electronic components and another dedicated to the application of the standard EN 45554 in the automotive industry. Finally, the CIRC-UITS project demonstrated the benefits coming from the adoption of a Digital Circular Economy through 4 pilots, one on Electronic Control Units (ECU), one on Tire Pressure Monitoring Sensors (TPMS), one on In-Mold Electronics (IME) and one on sorting of obsolete Printed Circuit Boards (PCB) from washing machines.…

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This open access book summarizes research being pursued within the FENIX project, funded by the EU community under the H2020 programme, the goal of which is to design a new product service paradigm able to promote innovative business models, to open added value to the vessels and to create new market segments. It experiments and validates its approach on three new concepts of added-value specialized vessels able to run requested services for several maritime sectors in the most effective, efficient, economic valuable and eco-friendly way. The three vessels share the same lean design methodology, IoT tools and HPC simulation strategy: a lean fact-based design model approach, which combines real operative data at sea with lean methodology, to support the development and implementation of the vessel concepts; IT customized tools to enable the acquisition, processing and usage of on board and local weather data, through an IoT platform, to provide business services to different stakeholders; HPC simulation, providing a virtual towing tank environment, for early vessel design improvement and testing. The book demonstrates that an integrated LCC analysis and LCC strategy to guarantee sustainability to vessels concepts and the proper environmental attention inside the maritime industry.…

Condición: As New. Unread book in perfect condition.

Condición: NEW.

Paperback. Condición: new. Paperback. This book constitutes the proceedings of the 4th International Conference, IN4PL 2023, held in Rome, Italy, during November 15-17, 2023The 11 full papers and the 13 short papers included in this volume were carefully reviewed and selected from 33 submissions. The book focuses on research and development involving innovative methods, software and hardware, whereby intelligent systems are applied to industrial production and logistics. This is currently related to the concept of industry 4.0 - an expression reflecting the trend towards automation and data exchange in manufacturing technologies and processes which include cyber-physical systems, the industrial internet of things, industrial robotics, cloud computing, cognitive computing and artificial intelligence. Shipping may be from multiple locations in the US or from the UK, depending on stock availability. …

Condición: New.

Condición: New.

Hardback. Condición: New.