Shibe vineet (20 resultados)

Condición: New. 108 pp., Paperback, new. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.

Condición: New. pp. 72.

Condición: New.

Condición: New.

Paperback. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Taschenbuch. Condición: Neu. Computer Aided Engineering of Gear Box | Stress Anaylsis Using ANSYS | Vineet Shibe | Taschenbuch | 72 S. | Englisch | 2013 | LAP LAMBERT Academic Publishing | EAN 9783659384639 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Advances in engineering technology in recent years have brought demands for gear teeth, which can operate at ever increasing load capacities and speeds. The gears generally fail when tooth stress exceeds the safe limit. Therefore, it is essential to determine the maximum stress that a gear tooth is subjected to, under a specified loading. When failure occurs, they are expensive not only in terms of the cost of replacement or repair but also the cost associated with the downtime of the system of which they are a part. Reliability is thus a critical economic factor and for designer to produce gears with high reliability they need to be able to accurately predict the stress experienced by the loaded gear teeth. The major problems being faced in the gearbox manufactured by Kay Kay Industrial Corporation, Patiala are interference, surface fatigue and fracture. In order to analyze the exact failure point and the stress levels at which gear is failing, the modeling and stress analysis of the gear box has been done in Pro-E & ANSYS respectively. The necessary design modifications have also been made to rectify these problems. 72 pp. Englisch.…

Condición: New. Print on Demand pp. 72 2:B&W 6 x 9 in or 229 x 152 mm Perfect Bound on Creme w/Gloss Lam.

Condición: New. PRINT ON DEMAND pp. 72.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Shibe VineetVineet Shibe is a Research Scholar in Punjab Technical University, Jalandhar & is working as an Assistant Professor in the Department of Mechanical Engineering at B.H.S.B.I.E.T.(Established. & Promoted by Government of P.…

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The Proportional Integral Derivative (PID) controller is one of the most common type of feedback controllers used in dynamics systems. This controller has been widely used in many different areas such as aerospace, process control, manufacturing, robotics and automation. In this book a comparison has been made between the performances of PID controllers used in various industries and that of its fuzzy model. To achieve this goal, real time data was collected from different PID controllers used in various industries for measurement of temperature, pressure, flow and level at various positions in process. On the bases of this collected data, a fuzzy model has been developed for each PID controller. The fuzzy logic based controller has been implemented by taking error and change in error as the inputs and incorporating the IF-THEN rules. On the bases of the rule-base a fuzzified output was obtained. Finally, a comparison has been made between the performance of PID controller and that of its fuzzy model.…

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Kumar RakeshRakesh Kumar and Vineet Shibe are working as Assistant Professor at B.H.S.B.I.E.T. (Established by Government of Punjab), Lehragaga,Punjab, INDIA. Vineet Shibe is a Research Scholar in Punjab Technical University, Jalan.…

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Advances in engineering technology in recent years have brought demands for gear teeth, which can operate at ever increasing load capacities and speeds. The gears generally fail when tooth stress exceeds the safe limit. Therefore, it is essential to determine the maximum stress that a gear tooth is subjected to, under a specified loading. When failure occurs, they are expensive not only in terms of the cost of replacement or repair but also the cost associated with the downtime of the system of which they are a part. Reliability is thus a critical economic factor and for designer to produce gears with high reliability they need to be able to accurately predict the stress experienced by the loaded gear teeth. The major problems being faced in the gearbox manufactured by Kay Kay Industrial Corporation, Patiala are interference, surface fatigue and fracture. In order to analyze the exact failure point and the stress levels at which gear is failing, the modeling and stress analysis of the gear box has been done in Pro-E & ANSYS respectively. The necessary design modifications have also been made to rectify these problems.…

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Solid particle erosion due to the repeated impact of fly ash and unburnt carbon particles is a serious and persistent problem faced by boiler components such as boiler tubes, boiler walls and induced draft (I.D.) fans, etc. especially in coal-fired power plants. Pressure and Process Boilers, Saharanpur, Uttar Pradesh (India) is a leading manufacturer of boilers and the major problem being faced by them is the erosion of I.D. fans. In order to minimize the incurred economic losses, this company allowed us to carry out the research work on the project of combating erosion of the blades of I.D. fans with some surface modification techniques. After through literature review three different types of Fe-C-Cr based hardfacing electrodes (designated as HF1, HF2 and HF3) were deposited by MMAW process and four different types of D-Gun sprayed surface coatings, i.e. WC-12%Co, Cr3C2-25NiCr, Ni-20%Cr and Al2O3-13%TiO2 were applied on ASTM A36 steel. 376 pp. Englisch.…

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Solid particle erosion due to the repeated impact of fly ash and unburnt carbon particles is a serious and persistent problem faced by boiler components such as boiler tubes, boiler walls and induced draft (I.D.) fans, etc. especially in coal-fired power plants. Pressure and Process Boilers, Saharanpur, Uttar Pradesh (India) is a leading manufacturer of boilers and the major problem being faced by them is the erosion of I.D. fans. In order to minimize the incurred economic losses, this company allowed us to carry out the research work on the project of combating erosion of the blades of I.D. fans with some surface modification techniques. After through literature review three different types of Fe-C-Cr based hardfacing electrodes (designated as HF1, HF2 and HF3) were deposited by MMAW process and four different types of D-Gun sprayed surface coatings, i.e. WC-12%Co, Cr3C2-25NiCr, Ni-20%Cr and Al2O3-13%TiO2 were applied on ASTM A36 steel.…

Taschenbuch. Condición: Neu. Combating Erosive Wear of Induced Draft Fans in Coal Fired Power Plant | Using Some Surface Modification Techniques | Vineet Shibe | Taschenbuch | Englisch | 2019 | LAP LAMBERT Academic Publishing | EAN 9786200468918 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu Print on Demand. …

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Solid particle erosion due to the repeated impact of fly ash and unburnt carbon particles is a serious and persistent problem faced by boiler components such as boiler tubes, boiler walls and induced draft (I.D.) fans, etc. especially in coal-fired power plants. Pressure and Process Boilers, Saharanpur, Uttar Pradesh (India) is a leading manufacturer of boilers and the major problem being faced by them is the erosion of I.D. fans. In order to minimize the incurred economic losses, this company allowed us to carry out the research work on the project of combating erosion of the blades of I.D. fans with some surface modification techniques. After through literature review three different types of Fe-C-Cr based hardfacing electrodes (designated as HF1, HF2 and HF3) were deposited by MMAW process and four different types of D-Gun sprayed surface coatings, i.e. WC-12%Co, Cr3C2-25NiCr, Ni-20%Cr and Al2O3-13%TiO2 were applied on ASTM A36 steel.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 376 pp. Englisch.…

Condición: New. Print on Demand.

Condición: New. PRINT ON DEMAND.

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Advances in engineering technology in recent years have brought demands for gear teeth, which can operate at ever increasing load capacities and speeds. The gears generally fail when tooth stress exceeds the safe limit. Therefore, it is essential to determine the maximum stress that a gear tooth is subjected to, under a specified loading. When failure occurs, they are expensive not only in terms of the cost of replacement or repair but also the cost associated with the downtime of the system of which they are a part. Reliability is thus a critical economic factor and for designer to produce gears with high reliability they need to be able to accurately predict the stress experienced by the loaded gear teeth. The major problems being faced in the gearbox manufactured by Kay Kay Industrial Corporation, Patiala are interference, surface fatigue and fracture. In order to analyze the exact failure point and the stress levels at which gear is failing, the modeling and stress analysis of the gear box has been done in Pro-E & ANSYS respectively. The necessary design modifications have also been made to rectify these problems.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 72 pp. Englisch.…