Ruben schlutter (41 resultados)
- Tapa dura
Librería: INDOO, Avenel, NJ, Estados Unidos de AmericaINDOO
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 113,13
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 20 disponibles
Condición: New.
- Tapa dura
Librería: PBShop.store UK, Fairford, GLOS, Reino UnidoPBShop.store UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 154,77
Envío por EUR 6,83Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
HRD. Condición: New. New Book. Shipped from UK. Established seller since 2000.
- Tapa dura
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 164,12
Envío por EUR 2,28Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New.
- Tapa dura
Librería: INDOO, Avenel, NJ, Estados Unidos de AmericaINDOO
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 167,15
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 20 disponibles
Condición: New.
- Tapa dura
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 152,63
Envío por EUR 14,55Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. Condición: Brand New. 255 pages. 9.76x6.89x0.83 inches. In Stock.
- Tapa dura
Librería: Brook Bookstore On Demand, Napoli, NA, ItaliaBrook Bookstore On Demand
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 155,36
Envío por EUR 11,00Se envía de Italia a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: new.
- Tapa dura
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 154,76
Envío por EUR 17,46Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New.
- Tapa dura
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 178,05
Envío por EUR 2,28Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: As New. Unread book in perfect condition.
- Tapa dura
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 176,42
Envío por EUR 17,46Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: As New. Unread book in perfect condition.
- Tapa dura
- Primera edición
Librería: Kennys Bookshop and Art Galleries Ltd., Galway, GY, IrlandaKennys Bookshop and Art Galleries Ltd.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 182,22
Envío por EUR 9,50Se envía de Irlanda a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New. 2024. 1st Edition. hardcover. . . . . .
- Tapa dura
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 148,34
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New. This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastic.
- Tapa dura
Librería: Rarewaves.com USA, London, LONDO, Reino UnidoRarewaves.com USA
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 206,47
Gastos de envío gratisSe envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Hardback. Condición: New. This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This possibili…ty of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology.
- Tapa dura
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 194,90
Envío por EUR 11,64Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Hardcover. Condición: Brand New. 371 pages. 7.01x1.18x9.61 inches. In Stock.
- Tapa dura
Librería: Rheinberg-Buch Andreas Meier eK, Bergisch Gladbach, AlemaniaRheinberg-Buch Andreas Meier eK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 179,99
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Neuware -This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This poss…ibility of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology. Contents:-Introduction-Tool Steels and Their Coatability-Fundamentals of Coating Technologies-Measurement Technology for Coating Characterization-Application of Functional Coatings 400 pp. Englisch.
- Tapa dura
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 179,99
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Neuware -This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This poss…ibility of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology. Contents:-Introduction-Tool Steels and Their Coatability-Fundamentals of Coating Technologies-Measurement Technology for Coating Characterization-Application of Functional Coatings 400 pp. Englisch.
- Tapa dura
Librería: Wegmann1855, Zwiesel, AlemaniaWegmann1855
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 179,99
Envío por EUR 25,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Neuware -This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This poss…ibility of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology.
- Tapa dura
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 221,32
Envío por EUR 7,56Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 3 disponibles
Condición: New.
- Tapa dura
Librería: Kennys Bookstore, Olney, MD, Estados Unidos de AmericaKennys Bookstore
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 233,86
Envío por EUR 9,06Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New. 2024. 1st Edition. hardcover. . . . . . Books ship from the US and Ireland.
- Tapa dura
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 242,36
Envío por EUR 3,44Se envía dentro de Estados Unidos de AmericaCantidad disponible: 3 disponibles
Condición: New.
- Tapa dura
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 179,99
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Neuware -This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This poss…ibility of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology.Hanser Fachbuchverlag, Kolberger Str. 22, 81679 München 400 pp. Englisch.
- Tapa dura
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 179,99
Envío por EUR 65,06Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Neuware - This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This pos…sibility of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology. Contents:-Introduction-Tool Steels and Their Coatability-Fundamentals of Coating Technologies-Measurement Technology for Coating Characterization-Application of Functional Coatings.
- Tapa dura
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 251,17
Envío por EUR 13,94Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. In English.
- Tapa dura
Librería: Rarewaves.com UK, London, Reino UnidoRarewaves.com UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 201,50
Envío por EUR 75,65Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Hardback. Condición: New. This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This possibili…ty of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology.
- Tapa dura
Librería: Books-by-Floh, Paderborn, AlemaniaBooks-by-Floh
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 179,99
Envío por EUR 105,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Neuware -This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This poss…ibility of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology. 400 pp. Englisch.
Editorial: Hanser Fachbuchverlag 2023-11-10, 2023
- Tapa dura
Librería: Chiron Media, Wallingford, Reino UnidoChiron Media
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 109,02
Envío por EUR 18,03Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. Condición: New.
- Tapa dura
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 119,67
Envío por EUR 2,28Se envía dentro de Estados Unidos de AmericaCantidad disponible: 2 disponibles
Condición: As New. Unread book in perfect condition.
- Tapa dura
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 111,99
Envío por EUR 17,46Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Condición: New.
- Tapa dura
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 128,50
Envío por EUR 2,28Se envía dentro de Estados Unidos de AmericaCantidad disponible: 2 disponibles
Condición: New.
- Tapa dura
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 119,08
Envío por EUR 17,46Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Condición: As New. Unread book in perfect condition.
- Tapa dura
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 89,99
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Das Buch bietet einen aktuellen, plattformunabhaengigen Einstieg in die Spritzgiesssimulation, die eine sehr wichtige Rolle in der Konstruktion von Werkzeugen und Formteilen sowie auch die Prozessentwicklung und -optimierung spielt. Die Inhalte werden im inge.
