pryor m r (30 resultados)

Paperback. Condición: New.

Paperback. Condición: New.

Paperback. Condición: New.

Hardcover. Condición: New.

Condición: New.

Condición: As New. Unread book in perfect condition.

Soft Cover. Condición: Good -. "Reprinted from Corrosion Science, 1968, Vol. 8, pp. 149 to 157, Pergamon Press, Printed in Great Britain." Pages are slightly wrinkled but clean and tight. Cover is good. 10 page stapled booklet. (g).

Soft Cover. Condición: Good. "Reprinted from Corrosion Science, 1969, vol. 9, pp. 509 to 517. Pergamon Press. Printed in Great Britain." 12 page stapled booklet. The pages are clean and tight. Cover is good. (g).

Condición: New.

Condición: As New. Unread book in perfect condition.

Soft cover. Condición: Very Good. No Jacket. 8 pages ; 92 mm ; OCLC 41202775 ; small booklet with pictorial printed covers in green paper ; Miniature book advertising "Piso's Cure for Consumption" and "Piso's Remedy for Catarrh". Testimonials for advertised remedies dated 1885 interspersed throughout text ; foxing ; exceedingly rare advertising item ; testimonials from W. M. Pryor, Iowa City, IA -- Lillie N. Smith, Peru, Mass -- J. H. Carleton, Union Center, Ill. -- R. N. Baker, Fort Stockton, Texas -- Mrs. T. S. Heck, Long Pine, Neb. -- L. L. Whipple, druggist, Kintner, Mich. -- Mrs. Cora Barber, Princeton, NJ -- Wm. O. Outten, Maysville, Ky -- Sold by Chas. E. Swift, Ashtebula, O[hio]; small tear and crease to back cover, else VG; Rare. Book.

Paperback. Condición: new. Paperback. textbook. Basic description is attempted, and the bibliography has been specifically chosen to guide the reader toward a fuller treatment of his special ised interests. No fully satisfactory term has yet emerged to describe the processing of minerals, which is also called "ore dressing", "mineral dressing", "mineral engineering" and, in the University of London degree course "mineral technology". The dressing of ores was an excellent description of the older processes which aimed to break down rock to appropriate sizes, grade it, and separate the heavy fraction from the light one in each grade or size by gravity methods. The work done in the mill today goes far beyond these simple operations, and requires some knowledge of physical chemistry, particularly the branches which deal with the physics and chemistry of surfaces and of the interphase between solid particle and the surrounding liquid. At the same time, the engineer must not become so absorbed in the study of fundamental and applied technology as a physico-chemical science that he overlooks the mechanical, economic, and humanistic aspects oli his work. He is an engineer, a chemist, a physicist, and an administrator and, as such, should have a sound scientifj. c and cultural education. Technically, his work is to extract the valuable minerals from the ore sent to his mill; economically, it is to balance all the financial costs and returns in such a way as to ensure the maximum profit from the operation. No fully satisfactory term has yet emerged to describe the processing of minerals, which is also called "ore dressing", "mineral dressing", "mineral engineering" and, in the University of London degree course "mineral technology". Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condición: New.

Condición: New. In.

Condición: New.

Condición: New. pp. 860 3rd Edition.

Taschenbuch. Condición: Neu. Mineral Processing | M. R. Pryor | Taschenbuch | 844 S. | Englisch | 2011 | Springer | EAN 9789401029438 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Paperback. Condición: Brand New. 3rd reprint edition. 844 pages. 9.00x6.00x1.75 inches. In Stock.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - textbook. Basic description is attempted, and the bibliography has been specifically chosen to guide the reader toward a fuller treatment of his special ised interests. No fully satisfactory term has yet emerged to describe the processing of minerals, which is also called 'ore dressing', 'mineral dressing', 'mineral engineering' and, in the University of London degree course 'mineral technology'. The dressing of ores was an excellent description of the older processes which aimed to break down rock to appropriate sizes, grade it, and separate the heavy fraction from the light one in each grade or size by gravity methods. The work done in the mill today goes far beyond these simple operations, and requires some knowledge of physical chemistry, particularly the branches which deal with the physics and chemistry of surfaces and of the interphase between solid particle and the surrounding liquid. At the same time, the engineer must not become so absorbed in the study of fundamental and applied technology as a physico-chemical science that he overlooks the mechanical, economic, and humanistic aspects oli his work. He is an engineer, a chemist, a physicist, and an administrator and, as such, should have a sound scientifj. c and cultural education. Technically, his work is to extract the valuable minerals from the ore sent to his mill; economically, it is to balance all the financial costs and returns in such a way as to ensure the maximum profit from the operation.

Rústica. Condición: New. Estado de la sobrecubierta: Nuevo. 01. Esta guía clásica, revisada y actualizada, incluye información sobre: beneficios de dar el pecho para la salud de los bebés y las madres lactantes; consejos para empezar la lactancia desde las primeras horas después del parto; consejos sobre la lactancia. LIBRO.

Paperback. Condición: new. Paperback. textbook. Basic description is attempted, and the bibliography has been specifically chosen to guide the reader toward a fuller treatment of his special ised interests. No fully satisfactory term has yet emerged to describe the processing of minerals, which is also called "ore dressing", "mineral dressing", "mineral engineering" and, in the University of London degree course "mineral technology". The dressing of ores was an excellent description of the older processes which aimed to break down rock to appropriate sizes, grade it, and separate the heavy fraction from the light one in each grade or size by gravity methods. The work done in the mill today goes far beyond these simple operations, and requires some knowledge of physical chemistry, particularly the branches which deal with the physics and chemistry of surfaces and of the interphase between solid particle and the surrounding liquid. At the same time, the engineer must not become so absorbed in the study of fundamental and applied technology as a physico-chemical science that he overlooks the mechanical, economic, and humanistic aspects oli his work. He is an engineer, a chemist, a physicist, and an administrator and, as such, should have a sound scientifj. c and cultural education. Technically, his work is to extract the valuable minerals from the ore sent to his mill; economically, it is to balance all the financial costs and returns in such a way as to ensure the maximum profit from the operation. No fully satisfactory term has yet emerged to describe the processing of minerals, which is also called "ore dressing", "mineral dressing", "mineral engineering" and, in the University of London degree course "mineral technology". Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Paperback. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: As New. Unread book in perfect condition.

Paperback. Condición: Brand New. 3rd reprint edition. 844 pages. 9.00x6.00x1.75 inches. In Stock. This item is printed on demand.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -textbook. Basic description is attempted, and the bibliography has been specifically chosen to guide the reader toward a fuller treatment of his special ised interests. No fully satisfactory term has yet emerged to describe the processing of minerals, which is also called 'ore dressing', 'mineral dressing', 'mineral engineering' and, in the University of London degree course 'mineral technology'. The dressing of ores was an excellent description of the older processes which aimed to break down rock to appropriate sizes, grade it, and separate the heavy fraction from the light one in each grade or size by gravity methods. The work done in the mill today goes far beyond these simple operations, and requires some knowledge of physical chemistry, particularly the branches which deal with the physics and chemistry of surfaces and of the interphase between solid particle and the surrounding liquid. At the same time, the engineer must not become so absorbed in the study of fundamental and applied technology as a physico-chemical science that he overlooks the mechanical, economic, and humanistic aspects oli his work. He is an engineer, a chemist, a physicist, and an administrator and, as such, should have a sound scientifj. c and cultural education. Technically, his work is to extract the valuable minerals from the ore sent to his mill; economically, it is to balance all the financial costs and returns in such a way as to ensure the maximum profit from the operation. 860 pp. Englisch.

Condición: New. Print on Demand pp. 860 23:B&W 6 x 9 in or 229 x 152 mm Perfect Bound on White w/Gloss Lam.

Condición: New. PRINT ON DEMAND pp. 860, Abbreviations.

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -textbook. Basic description is attempted, and the bibliography has been specifically chosen to guide the reader toward a fuller treatment of his special ised interests. No fully satisfactory term has yet emerged to describe the processing of minerals, which is also called 'ore dressing', 'mineral dressing', 'mineral engineering' and, in the University of London degree course 'mineral technology'. The dressing of ores was an excellent description of the older processes which aimed to break down rock to appropriate sizes, grade it, and separate the heavy fraction from the light one in each grade or size by gravity methods. The work done in the mill today goes far beyond these simple operations, and requires some knowledge of physical chemistry, particularly the branches which deal with the physics and chemistry of surfaces and of the interphase between solid particle and the surrounding liquid. At the same time, the engineer must not become so absorbed in the study of fundamental and applied technology as a physico-chemical science that he overlooks the mechanical, economic, and humanistic aspects oli his work. He is an engineer, a chemist, a physicist, and an administrator and, as such, should have a sound scientifj. c and cultural education. Technically, his work is to extract the valuable minerals from the ore sent to his mill; economically, it is to balance all the financial costs and returns in such a way as to ensure the maximum profit from the operation.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 860 pp. Englisch.

Leather Bound. Condición: New. Language: English. Language: English. Presenting an Exquisite Leather-Bound Edition, expertly crafted with Original Natural Leather that gracefully adorns the spine and corners. The allure continues with Golden Leaf Printing that adds a touch of elegance, while Hand Embossing on the rounded spine lends an artistic flair. This masterpiece has been meticulously reprinted in 2025, utilizing the invaluable guidance of the original edition published many years ago in 1899. The contents of this book are presented in classic black and white. Its durability is ensured through a meticulous sewing binding technique, enhancing its longevity. Imprinted on top-tier quality paper. A team of professionals has expertly processed each page, delicately preserving its content without alteration. Due to the vintage nature of these books, every page has been manually restored for legibility. However, in certain instances, occasional blurriness, missing segments, or faint black spots might persist. We sincerely hope for your understanding of the challenges we faced with these books. Recognizing their significance for readers seeking insight into our historical treasure, we've diligently restored and reissued them. Our intention is to offer this valuable resource once again. We eagerly await your feedback, hoping that you'll find it appealing and will generously share your thoughts and recommendations. Lang: - English, Pages:- 298, Print on Demand. If it is a multi-volume set, then it is only a single volume. We are specialised in Customisation of books, if you wish to opt different color leather binding, you may contact us. This service is chargeable. Product Disclaimer: Kindly be informed that, owing to the inherent nature of leather as a natural material, minor discolorations or textural variations may be perceptible. Explore the FOLIO EDITION (12x19 Inches): Available Upon Request. 298 298.

Leather Bound. Condición: New. Language: English. Language: English. Presenting an Exquisite Leather-Bound Edition, expertly crafted with Original Natural Leather that gracefully adorns the spine and corners. The allure continues with Golden Leaf Printing that adds a touch of elegance, while Hand Embossing on the rounded spine lends an artistic flair. This masterpiece has been meticulously reprinted in 2025, utilizing the invaluable guidance of the original edition published many years ago in 1903. The contents of this book are presented in classic black and white. Its durability is ensured through a meticulous sewing binding technique, enhancing its longevity. Imprinted on top-tier quality paper. A team of professionals has expertly processed each page, delicately preserving its content without alteration. Due to the vintage nature of these books, every page has been manually restored for legibility. However, in certain instances, occasional blurriness, missing segments, or faint black spots might persist. We sincerely hope for your understanding of the challenges we faced with these books. Recognizing their significance for readers seeking insight into our historical treasure, we've diligently restored and reissued them. Our intention is to offer this valuable resource once again. We eagerly await your feedback, hoping that you'll find it appealing and will generously share your thoughts and recommendations. Lang: - English, Pages:- 420, Print on Demand. If it is a multi-volume set, then it is only a single volume. We are specialised in Customisation of books, if you wish to opt different color leather binding, you may contact us. This service is chargeable. Product Disclaimer: Kindly be informed that, owing to the inherent nature of leather as a natural material, minor discolorations or textural variations may be perceptible. Explore the FOLIO EDITION (12x19 Inches): Available Upon Request. 420 420.