Mukesh regmi (14 resultados)

Condición: New.

Paperback. Condición: Brand New. 88 pages. 8.66x5.91x0.20 inches. In Stock.

Taschenbuch. Condición: Neu. Multi Response Optimization of Die Sinker Edm for Alsic Composite | A Design of Experiments Technique to Optimization | Mukesh Regmi | Taschenbuch | 88 S. | Englisch | 2016 | LAP LAMBERT Academic Publishing | EAN 9783659895043 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

Taschenbuch. Condición: Neu. Flood Map Delineation Using HEC-RAS, HEC-GEORAS & ARC-GIS | A Case Study of Narayani River | Mukesh Regmi (u. a.) | Taschenbuch | Englisch | 2021 | LAP LAMBERT Academic Publishing | EAN 9786204199108 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -One of the important aspects that should be taken into consideration in the majority of manufacturing processes and,particularly, in processes related to Electrical Discharge Machining (EDM) is the correct selection of manufacturing conditions. Appropriate choice of the machining parameters and electrode material during electric discharge machining is fundamental to its performance and accuracy. This book presents a fundamental study of EDM by using two different electrode and aims at investigating the effect of EDM parameters on material removal rate (MRR) and tool wear rate(TWR) as an alternative method for machining Aluminium Silicon Carbide (AlSiC ) metal matrix composite produced with stir casting method. The primary aim of this research is to determine the optimal machining parameter conditions of intensity of current, pulse on time and pulse off time and proper electrode material for machining AlSiC workpiece using EDM. The concept of response surface methodology, with a well-designed experimental scheme named central composite design was used and a second order model capable of predicting the responses is developed. This model was further checked for its adequacy by ANOVA. 88 pp. Englisch.…

Condición: New. Print on Demand.

Condición: New. PRINT ON DEMAND.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book is based on the one dimensional hydrodynamic model simulation of flood map of one of the largest river basin i.e. Narayani River floodplain, located in the Central zone of Nepal. The study area covers around twenty kilometers of the flood area located at the upper stream of the bridge section in East West Highway of Narayani River. The precipitation data collected from the Department of Hydrology has been used to calculate the four scenario (100, 200, 500 and 1000 years) flood analysis from Gumbell method. The digital model is developed through ARCGIS by feeding the Gumbell analyzed flood data using flood depth as a hydraulic characteristic factor of flood. The hydrodynamic model for mapping were developed using the Hydrologic Engineering Center River Analysis System (HEC-RAS) in concert with HEC-GeoRAS. HEC- GeoRAS set procedures, tools, and utilities for processing Geographic Information Systems data by using a graphical user interface on a GIS platform. Different Flood Map zone has been prepared and the inundation area has been identified in this book as per the discharge taken for four scenario (100, 200, 500 and 1000 years). 64 pp. Englisch.…

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Regmi MukeshMukesh Regmi is originally from Nepal. He graduated from IOE Thapathali Campus as a gold medalist with a distinction division in Industrial Engineering. He obtained M.Tech. degree in Mechanical Engineering with specializa.…

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Regmi MukeshMukesh Regmi and Krishna Aryal are currently from Nepal. Mukesh Regmi has done bachelors in industrial engineering from IOE and masters in mechanical engineering from VTU and Krishna Aryal has done bachelors in civil engi.…

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -One of the important aspects that should be taken into consideration in the majority of manufacturing processes and,particularly, in processes related to Electrical Discharge Machining (EDM) is the correct selection of manufacturing conditions. Appropriate choice of the machining parameters and electrode material during electric discharge machining is fundamental to its performance and accuracy. This book presents a fundamental study of EDM by using two different electrode and aims at investigating the effect of EDM parameters on material removal rate (MRR) and tool wear rate(TWR) as an alternative method for machining Aluminium Silicon Carbide (AlSiC ) metal matrix composite produced with stir casting method. The primary aim of this research is to determine the optimal machining parameter conditions of intensity of current, pulse on time and pulse off time and proper electrode material for machining AlSiC workpiece using EDM. The concept of response surface methodology, with a well-designed experimental scheme named central composite design was used and a second order model capable of predicting the responses is developed. This model was further checked for its adequacy by ANOVA.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 88 pp. Englisch.…

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - This book is based on the one dimensional hydrodynamic model simulation of flood map of one of the largest river basin i.e. Narayani River floodplain, located in the Central zone of Nepal. The study area covers around twenty kilometers of the flood area located at the upper stream of the bridge section in East West Highway of Narayani River. The precipitation data collected from the Department of Hydrology has been used to calculate the four scenario (100, 200, 500 and 1000 years) flood analysis from Gumbell method. The digital model is developed through ARCGIS by feeding the Gumbell analyzed flood data using flood depth as a hydraulic characteristic factor of flood. The hydrodynamic model for mapping were developed using the Hydrologic Engineering Center River Analysis System (HEC-RAS) in concert with HEC-GeoRAS. HEC- GeoRAS set procedures, tools, and utilities for processing Geographic Information Systems data by using a graphical user interface on a GIS platform. Different Flood Map zone has been prepared and the inundation area has been identified in this book as per the discharge taken for four scenario (100, 200, 500 and 1000 years).…

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - One of the important aspects that should be taken into consideration in the majority of manufacturing processes and,particularly, in processes related to Electrical Discharge Machining (EDM) is the correct selection of manufacturing conditions. Appropriate choice of the machining parameters and electrode material during electric discharge machining is fundamental to its performance and accuracy. This book presents a fundamental study of EDM by using two different electrode and aims at investigating the effect of EDM parameters on material removal rate (MRR) and tool wear rate(TWR) as an alternative method for machining Aluminium Silicon Carbide (AlSiC ) metal matrix composite produced with stir casting method. The primary aim of this research is to determine the optimal machining parameter conditions of intensity of current, pulse on time and pulse off time and proper electrode material for machining AlSiC workpiece using EDM. The concept of response surface methodology, with a well-designed experimental scheme named central composite design was used and a second order model capable of predicting the responses is developed. This model was further checked for its adequacy by ANOVA.…

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book is based on the one dimensional hydrodynamic model simulation of flood map of one of the largest river basin i.e. Narayani River floodplain, located in the Central zone of Nepal. The study area covers around twenty kilometers of the flood area located at the upper stream of the bridge section in East West Highway of Narayani River. The precipitation data collected from the Department of Hydrology has been used to calculate the four scenario (100, 200, 500 and 1000 years) flood analysis from Gumbell method. The digital model is developed through ARCGIS by feeding the Gumbell analyzed flood data using flood depth as a hydraulic characteristic factor of flood. The hydrodynamic model for mapping were developed using the Hydrologic Engineering Center River Analysis System (HEC-RAS) in concert with HEC-GeoRAS. HEC- GeoRAS set procedures, tools, and utilities for processing Geographic Information Systems data by using a graphical user interface on a GIS platform. Different Flood Map zone has been prepared and the inundation area has been identified in this book as per the discharge taken for four scenario (100, 200, 500 and 1000 years).VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 64 pp. Englisch.…