mageto maxwell (21 resultados)

Condición: New.

Condición: New.

Taschenbuch. Condición: Neu. Al-Mg-Si Alloys: Micostructure, Hardness and Tensile Properties | TEM Studies of Microstructure in Relation to Hardness and Ductility in Al-Mg-Si (6xxx) Alloys | Maxwell Mageto | Taschenbuch | 116 S. | Englisch | 2010 | LAP LAMBERT Academic Publishing | EAN 9783838329222 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu.

Paperback. Condición: Brand New. 116 pages. 8.66x5.91x0.27 inches. In Stock.

Paperback. Condición: Brand New. 240 pages. 8.66x5.91x0.55 inches. In Stock.

paperback. Condición: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

paperback. Condición: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: New.

Condición: New.

Condición: New.

Condición: New.

Condición: New.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Two different solution heat treatments were used to study precipitation in two 6xxx (Al-Mg-si) dispersoid-free-alloys with composition: 0.721 at % Si, 0.577 at % Mg and 0.57 at %Si 0.72 at % Mg. The relation between their microstructure and macroscopical properties such as hardness and ductility has been investigated. Tensile tests, hardness measurements, electrical conductivity sigma tests, grain size measurements in optical microscope and microstructure characterization in Transmission Electron Microscope (TEM) have all been done. The effect of alloy composition and solution heat treatment temperature and time on the microstructure and the resulting macroscopical properties (hardness, yield stress, tensile strength and ductility) was investigated. The results indicate that when alloy A3 is solution treated at 520°C for 10 minutes and then annealed for 3 hours at 175°C, its hardness, yield stress and tensile strength as well as ductility is optimised i.e.A3 has better mechanical properties and low cost of production at these conditions. It has been proved that the strengthening was solely due to precipitation particles and not grain size. 116 pp. Englisch.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: MAGETO MAXWELLMaxwell J. Mageto, MSc: Studied Physics at the Norwegian University of Science and Technology, Norway. PhD candidate at Uppsala University, Sweden. Assistant lecturer University of Eastern Africa, Baraton, Kenya and Mas.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Titanium oxide has been extensively studied because of its usefulness in a wide variety of applications, including photo-catalysis, pigments and sensors. In this book, TCO thin films of TiO2:Nb and TiO2:Co were made by the spray pyrolysis technique. The films were deposited on Corning 7059, silicon and glass substrates at temperature 500 C and 475 C respectively using an alcoholic precursor solution consisting of titanium (iv) Isopropoxide with NbCl5 or Co(NO3)2. All as prepared films were amorphous, which were highly crystallized to be anatase TiO2 after air or hydrogen annealing. The TiO2:Nb films were then studied with regard to opto-electronic applications while TiO2:Co films were explored for magneto-optic applications. The influence of increasing Nb or Co dopant concentration on the electrical, optical, structural and (magneto-optical for CoxTi1-xO2) properties was investigated. The minimum resistivity, 3.36 cm, for Ti1-xNb2O2 film (x = 0.15) was obtained after 1 hour post deposition annealing in hydrogen atmosphere. Dispersion analysis using a model for dielectric susceptibility of the film consisting of two parts: Drude and Kim terms was used to simulate data. 240 pp. Englisch.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: MAGETO MAXWELLMaxwell Mageto: Studied Physics at Moi University, Norwegian University of Science and Technology and University of Eldoret. He studied at Uppsala University under the sandwich programme with Moi University and sponsor.

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Two different solution heat treatments were used to study precipitation in two 6xxx (Al-Mg-si) dispersoid-free-alloys with composition: 0.721 at % Si, 0.577 at % Mg and 0.57 at %Si 0.72 at % Mg. The relation between their microstructure and macroscopical properties such as hardness and ductility has been investigated. Tensile tests, hardness measurements, electrical conductivity sigma tests, grain size measurements in optical microscope and microstructure characterization in Transmission Electron Microscope (TEM) have all been done. The effect of alloy composition and solution heat treatment temperature and time on the microstructure and the resulting macroscopical properties (hardness, yield stress, tensile strength and ductility) was investigated. The results indicate that when alloy A3 is solution treated at 520°C for 10 minutes and then annealed for 3 hours at 175°C, its hardness, yield stress and tensile strength as well as ductility is optimised i.e.A3 has better mechanical properties and low cost of production at these conditions. It has been proved that the strengthening was solely due to precipitation particles and not grain size.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 116 pp. Englisch.

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Two different solution heat treatments were used to study precipitation in two 6xxx (Al-Mg-si) dispersoid-free-alloys with composition: 0.721 at % Si, 0.577 at % Mg and 0.57 at %Si 0.72 at % Mg. The relation between their microstructure and macroscopical properties such as hardness and ductility has been investigated. Tensile tests, hardness measurements, electrical conductivity sigma tests, grain size measurements in optical microscope and microstructure characterization in Transmission Electron Microscope (TEM) have all been done. The effect of alloy composition and solution heat treatment temperature and time on the microstructure and the resulting macroscopical properties (hardness, yield stress, tensile strength and ductility) was investigated. The results indicate that when alloy A3 is solution treated at 520°C for 10 minutes and then annealed for 3 hours at 175°C, its hardness, yield stress and tensile strength as well as ductility is optimised i.e.A3 has better mechanical properties and low cost of production at these conditions. It has been proved that the strengthening was solely due to precipitation particles and not grain size.

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Titanium oxide has been extensively studied because of its usefulness in a wide variety of applications, including photo-catalysis, pigments and sensors. In this book, TCO thin films of TiO2:Nb and TiO2:Co were made by the spray pyrolysis technique. The films were deposited on Corning 7059, silicon and glass substrates at temperature 500¿C and 475¿C respectively using an alcoholic precursor solution consisting of titanium (iv) Isopropoxide with NbCl5 or Co(NO3)2. All as prepared films were amorphous, which were highly crystallized to be anatase TiO2 after air or hydrogen annealing. The TiO2:Nb films were then studied with regard to opto-electronic applications while TiO2:Co films were explored for magneto-optic applications. The influence of increasing Nb or Co dopant concentration on the electrical, optical, structural and (magneto-optical for CoxTi1-xO2) properties was investigated. The minimum resistivity, 3.36 ¿ cm, for Ti1-xNb2O2 film (x = 0.15) was obtained after 1 hour post deposition annealing in hydrogen atmosphere. Dispersion analysis using a model for dielectric susceptibility of the film consisting of two parts: Drude and Kim terms was used to simulate data.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 240 pp. Englisch.

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Titanium oxide has been extensively studied because of its usefulness in a wide variety of applications, including photo-catalysis, pigments and sensors. In this book, TCO thin films of TiO2:Nb and TiO2:Co were made by the spray pyrolysis technique. The films were deposited on Corning 7059, silicon and glass substrates at temperature 500 C and 475 C respectively using an alcoholic precursor solution consisting of titanium (iv) Isopropoxide with NbCl5 or Co(NO3)2. All as prepared films were amorphous, which were highly crystallized to be anatase TiO2 after air or hydrogen annealing. The TiO2:Nb films were then studied with regard to opto-electronic applications while TiO2:Co films were explored for magneto-optic applications. The influence of increasing Nb or Co dopant concentration on the electrical, optical, structural and (magneto-optical for CoxTi1-xO2) properties was investigated. The minimum resistivity, 3.36 cm, for Ti1-xNb2O2 film (x = 0.15) was obtained after 1 hour post deposition annealing in hydrogen atmosphere. Dispersion analysis using a model for dielectric susceptibility of the film consisting of two parts: Drude and Kim terms was used to simulate data.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. CH3NH3PbI3-xClx wurde experimentell untersucht und hat vielversprechende Ergebnisse fuer die photovoltaische Anwendung gezeigt. Um die Leistung zu verbessern, untersuchte diese Studie den Effekt der unterschiedlichen Dicke von FTO, TiO2 und CH3NH3PbI3-xClx f.