M goosey (62 resultados)
- Tapa dura
Librería: Anybook.com, Lincoln, Reino UnidoAnybook.com
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Aceptable
EUR 2,97
Envío por EUR 15,67Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,700grams, ISBN:9780412584008.
- Tapa dura
Librería: Anybook.com, Lincoln, Reino UnidoAnybook.com
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Regular
EUR 5,81
Envío por EUR 15,67Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: Fair. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In fair condition, suitable as a study copy. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,850grams, ISB…N:0853343381.
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 60,28
Envío por EUR 13,80Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa dura
- Primera edición
Librería: Books Boheme, Tempe, AZ, Estados Unidos de AmericaBooks Boheme
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 80,88
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. Condición: Very Good. First Edition. :: Outlines some of the developments in the chemistry, formulations and application of polymers and their composites in the electronic and optoelectronic industries. :: Bound in publisher's printed paper-covered boards. Octavo (9 1/2 x 6 1/6 inches; 240 x 159 millimeters). 351 page…s. Condition: Very Good. Light shelf-wear / rubbing, small stains. Binding tight, interior clean.
- Tapa blanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 80,54
Envío por EUR 3,48Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 396.
Más imágenes- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 50,25
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Plastics for Electronics | M. Goosey | Taschenbuch | 380 S. | Englisch | 2011 | Springer | EAN 9789401086905 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 59,97
Envío por EUR 62,86Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Much of the progress towards ever greater miniaturisation made by the electronics industry, from the early days of valves to the development of the transistor and later the integrated circuit, has only been made possible because of the availability… of various polymeric materials. Indeed, many new plastics have been developed specifically for electri cal and electronic device applications and as a consequence the plastics and electronics industries have continued to grow side-by-side. Electronic components are one of the few groups of products in which the real cost performance function has declined significantly over the years, and part of the reason can be directly attributed to the availability and performance of new polymeric materials. The evolu tion of the personal computer is a specific example, where improve ments in polymer-based photoresists and plastic encapsulation techni ques have allowed the mass production of high-density memories and microprocessors at a cost which yields machines more powerful than mainframe computers of 30 years ago for little more than the price of a toy. Today, plastic materials are widely used throughout all areas of electrical and electronic device production in diverse applications ranging from alpha particle barriers on memory devices to insulator mouldings for the largest bushings and transformers. Plastics, or more correctly polymers, find use as packaging materials for individual microcircuits, protective coatings, wire and cable insulators, printed circuit board components, die attach adhesives, equipment casings and a host of other applications.
- Tapa dura
Librería: moluna, Greven, , Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 88,12
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Gebunden. Condición: New. An up-to-date review of the scale of the electronic waste problem, the impact of recent legislation, current and future methods for treatment, recycling and disposal.Über den AutorrnrnThe series has been edited by Professors Hester a.
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 163,59
Envío por EUR 13,80Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa dura
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 163,59
Envío por EUR 13,80Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa dura
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 163,59
Envío por EUR 13,80Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 163,59
Envío por EUR 13,80Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
Biochemistry of Cell Walls and Membranes in Fungi
Kuhn, P. J. (EDT); Trinci, A. P. J. (EDT); Jung, M. J. (EDT); Goosey, M. W. (EDT); Copping, L. G. (EDT)
- Tapa blanda
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 163,57
Envío por EUR 17,28Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.
Biochemistry of Cell Walls and Membranes in Fungi
Kuhn, P. J. (EDT); Trinci, A. P. J. (EDT); Jung, M. J. (EDT); Goosey, M. W. (EDT); Copping, L. G. (EDT)
- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 180,33
Envío por EUR 2,30Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.
- Tapa dura
Librería: moluna, Greven, , Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 136,16
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.
- Tapa dura
Librería: Buchpark, Trebbin, , AlemaniaBuchpark
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Excelente
EUR 79,84
Envío por EUR 105,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: Sehr gut. Zustand: Sehr gut | Seiten: 388 | Sprache: Englisch | Produktart: Bücher | Commercially successful fully synthetic polymeric materials were pro duced in the early years of this century, the first example being Bakelite. This was made from phenol and formaldehyde by Leo Bakeland in 1909. Before the end of th…e 1920s, a large number of other synthetic polymers had been created, including polyvinyl chloride and urea-formaldehyde. Today, there are literally hundreds of synthetic polymers commercially available with ranges of properties making them suitable for applications in many industrial sectors, including the electrical and electronics industries. In many instances the driving force behind the development of new materials actually came from the electronics industry, and today's advanced electronics would be inconceivable without these materials. For many years polymers have been widely used in all sectors of the electronics industry. From the early days of the semiconductor industry to the current state of the art, polymers have provided the enabling technologies that have fuelled the inexorable and rapid development of advanced electronic and optoelectronic devices.
- Tapa blanda
Librería: moluna, Greven, , Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 136,16
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.
Más imágenes- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 140,00
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Plastics for Electronics | M. Goosey | Taschenbuch | xiv | Englisch | 2010 | Springer | EAN 9789048140183 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Tapa blanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 214,66
Envío por EUR 3,48Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 380.
- Tapa blanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 217,67
Envío por EUR 3,48Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 420.
- Tapa dura
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 218,19
Envío por EUR 3,48Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 424 2nd Edition.
- Tapa dura
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 229,96
Envío por EUR 3,48Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 380.
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 168,73
Envío por EUR 63,20Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Polymeric materials are widely used during nearly all stages of the manufacturing process of electronics products and this book is intended to give an introductory overview of the chemistry, properties and uses of some of the more important classes… of materials likely to be encountered in these applications. It is intended to serve primarily as an introduction to the use of polymers and plastics in the processing and manufacture of electronic and electrical components and assemblies. With no in-depth knowledge of polymers assumed, the book is ideal for engineers and researchers working in areas where electronics and polymer technology overlap. There are also numerous references for those wishing to delve deeper. The first edition of this book was published in 1985 and since then there has been an unbelievable change and growth in the electronics industry. Much of this has been made possible by the continued development of new and improved polymeric materials. In some areas the polymers used have changed markedly whereas in others there have been continued improvements to the same basic materials. Consequently, this second edition includes new chapters detailing the materials which have emerged more recently. Chapters covering the same topics as the original version have been extensively rewritten and updated, often with the assistance of current international experts. In the last few years much work has been carried out on the development and use of special polymers that have important properties in addition to those normally associated with conventional polymers. This edition therefore includes a chapter that introduces one particular group of materials exhibiting these special properties, the ferroelectric polymers. The book also includes new chapters on high temperature thermoplastics, or engineering plastics as they are sometimes known, and their use in so-called moulded interconnect devices, where the polymer is used to provide a much wider range of functions than has been possible using a more conventional approach. This new edition also has a wider international coverage with chapters by experts based in Belgium, Holland, Switzerland, Germany, England and the United States of America.
- Tapa dura
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 168,73
Envío por EUR 63,67Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Commercially successful fully synthetic polymeric materials were pro duced in the early years of this century, the first example being Bakelite. This was made from phenol and formaldehyde by Leo Bakeland in 1909. Before the end of the 1920s, a large numbe…r of other synthetic polymers had been created, including polyvinyl chloride and urea-formaldehyde. Today, there are literally hundreds of synthetic polymers commercially available with ranges of properties making them suitable for applications in many industrial sectors, including the electrical and electronics industries. In many instances the driving force behind the development of new materials actually came from the electronics industry, and today's advanced electronics would be inconceivable without these materials. For many years polymers have been widely used in all sectors of the electronics industry. From the early days of the semiconductor industry to the current state of the art, polymers have provided the enabling technologies that have fuelled the inexorable and rapid development of advanced electronic and optoelectronic devices.
- Tapa dura
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 168,73
Envío por EUR 64,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Polymeric materials are widely used during nearly all stages of the manufacturing process of electronics products and this book is intended to give an introductory overview of the chemistry, properties and uses of some of the more important classes of mat…erials likely to be encountered in these applications. It is intended to serve primarily as an introduction to the use of polymers and plastics in the processing and manufacture of electronic and electrical components and assemblies. With no in-depth knowledge of polymers assumed, the book is ideal for engineers and researchers working in areas where electronics and polymer technology overlap. There are also numerous references for those wishing to delve deeper. The first edition of this book was published in 1985 and since then there has been an unbelievable change and growth in the electronics industry. Much of this has been made possible by the continued development of new and improved polymeric materials. In some areas the polymers used have changed markedly whereas in others there have been continued improvements to the same basic materials. Consequently, this second edition includes new chapters detailing the materials which have emerged more recently. Chapters covering the same topics as the original version have been extensively rewritten and updated, often with the assistance of current international experts. In the last few years much work has been carried out on the development and use of special polymers that have important properties in addition to those normally associated with conventional polymers. This edition therefore includes a chapter that introduces one particular group of materials exhibiting these special properties, the ferroelectric polymers. The book also includes new chapters on high temperature thermoplastics, or engineering plastics as they are sometimes known, and their use in so-called moulded interconnect devices, where the polymer is used to provide a much wider range of functions than has been possible using a more conventional approach. This new edition also has a wider international coverage with chapters by experts based in Belgium, Holland, Switzerland, Germany, England and the United States of America.
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 168,73
Envío por EUR 62,88Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Commercially successful fully synthetic polymeric materials were pro duced in the early years of this century, the first example being Bakelite. This was made from phenol and formaldehyde by Leo Bakeland in 1909. Before the end of the 1920s, a larg…e number of other synthetic polymers had been created, including polyvinyl chloride and urea-formaldehyde. Today, there are literally hundreds of synthetic polymers commercially available with ranges of properties making them suitable for applications in many industrial sectors, including the electrical and electronics industries. In many instances the driving force behind the development of new materials actually came from the electronics industry, and today's advanced electronics would be inconceivable without these materials. For many years polymers have been widely used in all sectors of the electronics industry. From the early days of the semiconductor industry to the current state of the art, polymers have provided the enabling technologies that have fuelled the inexorable and rapid development of advanced electronic and optoelectronic devices.
- Tapa blanda
Librería: Revaluation Books, Exeter, , Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 237,45
Envío por EUR 14,40Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: Brand New. 2nd ed. softcover of orig. ed. 1999 edition. 418 pages. 8.98x5.83x1.26 inches. In Stock.
Biochemistry of Cell Walls and Membranes in Fungi
Kuhn, P. J. (EDT); Trinci, A. P. J. (EDT); Jung, M. J. (EDT); Goosey, M. W. (EDT); Copping, L. G. (EDT)
- Tapa blanda
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 237,35
Envío por EUR 17,28Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: As New. Unread book in perfect condition.
- Tapa blanda
Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Como Nuevo
EUR 226,68
Envío por EUR 28,81Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: Like New. Like New. book.
Biochemistry of Cell Walls and Membranes in Fungi
Kuhn, P. J. (EDT); Trinci, A. P. J. (EDT); Jung, M. J. (EDT); Goosey, M. W. (EDT); Copping, L. G. (EDT)
- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 262,50
Envío por EUR 2,30Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: As New. Unread book in perfect condition.
