Lambie benjamin (11 resultados)

Condición: New.

215 pp.; 29 x 25 cm.; glue bound; black-and-white & color; edition size unknown; unsigned and unnumbered; offset-printed Exhibition catalogue published in conjunction with show held at the New Museum, New York, December 1, 2007 - March 30, 2008, the first exhibition in their new building on the Bowery. Curated by Richard Flood, Massimiliano Gioni, and Laura Hoptman. Texts by Richard Flood, Massimiliano Gioni, Laura Hoptman, Trevor Smith, Sara Reisman, Benjamin Godsill, and Eva Díaz. Artists include Alexandra Bircken, John Bock, Sara Reisman Martin Boyce, Tobias Buche, Carlos Bunga, Tom Burr, Urs Fischer, Abraham Cruzvillegas, Aaron Curry, Sam Durant, Claire Fontaine, Isa Genzken, Rachel Harrison, Elliott Hundley, Gabriel Kuri, Jim Lambie, Nate Lowman, Sarah Lucas, Matthew Monahan, Kristen Morgin, Manfred Pernice, Anselm Reyle, Marc André Robinson, Eva Rothschild, Lara Schnitger, Gedi Sibony, Shinique Smith, Nobuko Tsuchiya, Rebecca Warren, and Carol Bove. Includes contributor biographies and index. Fine. As issued, contents clean and unmarked. Due to large size and weight of this publication additional shipping charges will be required for international orders.…

Soft cover. Condición: Fine. No Jacket. 1st Edition. first edition 2012 softcover in fine condition, slight shelf wear on the cover, 290x250x24 mm, 216 pages.

Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This open access book explains the wetting of surfaces by fluids or their dewetting plays an important role in numerous processes in production engineering, energy technology and process engineering. However, the mutual influences between the dynamic wetting and dewetting processes and the local transport processes in terms of momentum, energy or material are not sufficiently understood and predictable, especially when the fluids and surfaces are complex and the processes are transient. The Collaborative Research Center 1194 of the German Research Foundation (CRC 1194) has derived 5 overarching goals for its research program: (1) In-depth understanding of the relationships and mechanisms of action of local momentum, heat and mass transport processes on wetting properties and vice versa; (2) Development of physically based, mathematical models, numerical methods and freely available simulation programs; (3) Development of high-resolution measurement methods for the experimental analysis of the interactions of transport and wetting processes, including the establishment of new measuring instruments; (4) Demonstration of the possibilities of targeted influencing and optimization of wetting processes by transport processes and vice versa; (5) Exemplary research into new and improved processes for selected, technically relevant applications. To achieve these goals, researchers from different disciplines (engineering, mathematics, natural sciences) work together in the CRC using complementary methods. This allows the processes to be investigated experimentally, theoretically and numerically on different length scales (nano-micro-meso-macro). In addition, a bridge is built between basic research and application-oriented research. The CRC comprises three project areas: (A) Generic Experiments (B) Modeling and Numerical Simulation and (C) New and Improved Applications. Two generic guiding configurations and OpenFOAM as a common software platform were established as important integrative brackets and for the common focus. The guiding configurations immersion body and droplet are, on the one hand, independent generic experiments that address complementary scientific questions and, on the other hand, arrangements that are taken up in numerous other experiments and that serve to validate the simulation models. In the last funding period, the focus lied on consolidating the comprehensive understanding and description of various coupled phenomena while further increasing the complexity of the fluids and surfaces. In addition, the transfer of measurement technology was accelerated.…

Hardcover. Condición: Brand New. 498 pages. 6.14x1.06x9.21 inches. In Stock.

Hardcover. Condición: new. Hardcover. This open access book explains the wetting of surfaces by fluids or their dewetting plays an important role in numerous processes in production engineering, energy technology and process engineering. However, the mutual influences between the dynamic wetting and dewetting processes and the local transport processes in terms of momentum, energy or material are not sufficiently understood and predictable, especially when the fluids and surfaces are complex and the processes are transient. The Collaborative Research Center 1194 of the German Research Foundation (CRC 1194) has derived 5 overarching goals for its research program: (1) In-depth understanding of the relationships and mechanisms of action of local momentum, heat and mass transport processes on wetting properties and vice versa; (2) Development of physically based, mathematical models, numerical methods and freely available simulation programs; (3) Development of high-resolution measurement methods for the experimental analysis of the interactions of transport and wetting processes, including the establishment of new measuring instruments; (4) Demonstration of the possibilities of targeted influencing and optimization of wetting processes by transport processes and vice versa; (5) Exemplary research into new and improved processes for selected, technically relevant applications. To achieve these goals, researchers from different disciplines (engineering, mathematics, natural sciences) work together in the CRC using complementary methods. This allows the processes to be investigated experimentally, theoretically and numerically on different length scales (nano-micro-meso-macro). In addition, a bridge is built between basic research and application-oriented research. The CRC comprises three project areas: (A) Generic Experiments (B) Modeling and Numerical Simulation and (C) New and Improved Applications. Two generic guiding configurations and OpenFOAM as a common software platform were established as important integrative brackets and for the common focus. The guiding configurations immersion body and droplet are, on the one hand, independent generic experiments that address complementary scientific questions and, on the other hand, arrangements that are taken up in numerous other experiments and that serve to validate the simulation models. In the last funding period, the focus lied on consolidating the comprehensive understanding and description of various coupled phenomena while further increasing the complexity of the fluids and surfaces. In addition, the transfer of measurement technology was accelerated. This open access book explains the wetting of surfaces by fluids or their dewetting plays an important role in numerous processes in production engineering, energy technology and process engineering. This item is printed on demand. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Buch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This open access book explains the wetting of surfaces by fluids or their dewetting plays an important role in numerous processes in production engineering, energy technology and process engineering. However, the mutual influences between the dynamic wetting and dewetting processes and the local transport processes in terms of momentum, energy or material are not sufficiently understood and predictable, especially when the fluids and surfaces are complex and the processes are transient. The Collaborative Research Center 1194 of the German Research Foundation (CRC 1194) has derived 5 overarching goals for its research program: (1) In-depth understanding of the relationships and mechanisms of action of local momentum, heat and mass transport processes on wetting properties and vice versa; (2) Development of physically based, mathematical models, numerical methods and freely available simulation programs; (3) Development of high-resolution measurement methods for the experimental analysis of the interactions of transport and wetting processes, including the establishment of new measuring instruments; (4) Demonstration of the possibilities of targeted influencing and optimization of wetting processes by transport processes and vice versa; (5) Exemplary research into new and improved processes for selected, technically relevant applications. To achieve these goals, researchers from different disciplines (engineering, mathematics, natural sciences) work together in the CRC using complementary methods. This allows the processes to be investigated experimentally, theoretically and numerically on different length scales (nano-micro-meso-macro). In addition, a bridge is built between basic research and application-oriented research. The CRC comprises three project areas: (A) Generic Experiments (B) Modeling and Numerical Simulation and (C) New and Improved Applications. Two generic guiding configurations and OpenFOAM as a common software platform were established as important integrative brackets and for the common focus. The guiding configurations immersion body and droplet are, on the one hand, independent generic experiments that address complementary scientific questions and, on the other hand, arrangements that are taken up in numerous other experiments and that serve to validate the simulation models. In the last funding period, the focus lied on consolidating the comprehensive understanding and description of various coupled phenomena while further increasing the complexity of the fluids and surfaces. In addition, the transfer of measurement technology was accelerated. 475 pp. Englisch. …

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt.

Hardcover. Condición: new. Hardcover. This open access book explains the wetting of surfaces by fluids or their dewetting plays an important role in numerous processes in production engineering, energy technology and process engineering. However, the mutual influences between the dynamic wetting and dewetting processes and the local transport processes in terms of momentum, energy or material are not sufficiently understood and predictable, especially when the fluids and surfaces are complex and the processes are transient. The Collaborative Research Center 1194 of the German Research Foundation (CRC 1194) has derived 5 overarching goals for its research program: (1) In-depth understanding of the relationships and mechanisms of action of local momentum, heat and mass transport processes on wetting properties and vice versa; (2) Development of physically based, mathematical models, numerical methods and freely available simulation programs; (3) Development of high-resolution measurement methods for the experimental analysis of the interactions of transport and wetting processes, including the establishment of new measuring instruments; (4) Demonstration of the possibilities of targeted influencing and optimization of wetting processes by transport processes and vice versa; (5) Exemplary research into new and improved processes for selected, technically relevant applications. To achieve these goals, researchers from different disciplines (engineering, mathematics, natural sciences) work together in the CRC using complementary methods. This allows the processes to be investigated experimentally, theoretically and numerically on different length scales (nano-micro-meso-macro). In addition, a bridge is built between basic research and application-oriented research. The CRC comprises three project areas: (A) Generic Experiments (B) Modeling and Numerical Simulation and (C) New and Improved Applications. Two generic guiding configurations and OpenFOAM as a common software platform were established as important integrative brackets and for the common focus. The guiding configurations immersion body and droplet are, on the one hand, independent generic experiments that address complementary scientific questions and, on the other hand, arrangements that are taken up in numerous other experiments and that serve to validate the simulation models. In the last funding period, the focus lied on consolidating the comprehensive understanding and description of various coupled phenomena while further increasing the complexity of the fluids and surfaces. In addition, the transfer of measurement technology was accelerated. This open access book explains the wetting of surfaces by fluids or their dewetting plays an important role in numerous processes in production engineering, energy technology and process engineering. This item is printed on demand. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.…

Buch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This open access book explains the wetting of surfaces by fluids or their dewetting plays an important role in numerous processes in production engineering, energy technology and process engineering. However, the mutual influences between the dynamic wetting and dewetting processes and the local transport processes in terms of momentum, energy or material are not sufficiently understood and predictable, especially when the fluids and surfaces are complex and the processes are transient. The Collaborative Research Center 1194 of the German Research Foundation (CRC 1194) has derived 5 overarching goals for its research program: (1) In-depth understanding of the relationships and mechanisms of action of local momentum, heat and mass transport processes on wetting properties and vice versa; (2) Development of physically based, mathematical models, numerical methods and freely available simulation programs; (3) Development of high-resolution measurement methods for the experimental analysis of the interactions of transport and wetting processes, including the establishment of new measuring instruments; (4) Demonstration of the possibilities of targeted influencing and optimization of wetting processes by transport processes and vice versa; (5) Exemplary research into new and improved processes for selected, technically relevant applications. To achieve these goals, researchers from different disciplines (engineering, mathematics, natural sciences) work together in the CRC using complementary methods. This allows the processes to be investigated experimentally, theoretically and numerically on different length scales (nano-micro-meso-macro). In addition, a bridge is built between basic research and application-oriented research. The CRC comprises three project areas: (A) Generic Experiments (B) Modeling and Numerical Simulation and (C) New and Improved Applications. Two generic guiding configurations and OpenFOAM as a common software platform were established as important integrative brackets and for the common focus. The guiding configurations immersion body and droplet are, on the one hand, independent generic experiments that address complementary scientific questions and, on the other hand, arrangements that are taken up in numerous other experiments and that serve to validate the simulation models. In the last funding period, the focus lied on consolidating the comprehensive understanding and description of various coupled phenomena while further increasing the complexity of the fluids and surfaces. In addition, the transfer of measurement technology was accelerated.Springer Nature Customer Service Center GmbH, Europaplatz 3,69115 Heidelberg, Germany, Heidelberg 500 pp. Englisch.…

Hardcover. Condición: new. Hardcover. This open access book explains the wetting of surfaces by fluids or their dewetting plays an important role in numerous processes in production engineering, energy technology and process engineering. However, the mutual influences between the dynamic wetting and dewetting processes and the local transport processes in terms of momentum, energy or material are not sufficiently understood and predictable, especially when the fluids and surfaces are complex and the processes are transient. The Collaborative Research Center 1194 of the German Research Foundation (CRC 1194) has derived 5 overarching goals for its research program: (1) In-depth understanding of the relationships and mechanisms of action of local momentum, heat and mass transport processes on wetting properties and vice versa; (2) Development of physically based, mathematical models, numerical methods and freely available simulation programs; (3) Development of high-resolution measurement methods for the experimental analysis of the interactions of transport and wetting processes, including the establishment of new measuring instruments; (4) Demonstration of the possibilities of targeted influencing and optimization of wetting processes by transport processes and vice versa; (5) Exemplary research into new and improved processes for selected, technically relevant applications. To achieve these goals, researchers from different disciplines (engineering, mathematics, natural sciences) work together in the CRC using complementary methods. This allows the processes to be investigated experimentally, theoretically and numerically on different length scales (nano-micro-meso-macro). In addition, a bridge is built between basic research and application-oriented research. The CRC comprises three project areas: (A) Generic Experiments (B) Modeling and Numerical Simulation and (C) New and Improved Applications. Two generic guiding configurations and OpenFOAM as a common software platform were established as important integrative brackets and for the common focus. The guiding configurations immersion body and droplet are, on the one hand, independent generic experiments that address complementary scientific questions and, on the other hand, arrangements that are taken up in numerous other experiments and that serve to validate the simulation models. In the last funding period, the focus lied on consolidating the comprehensive understanding and description of various coupled phenomena while further increasing the complexity of the fluids and surfaces. In addition, the transfer of measurement technology was accelerated. This open access book explains the wetting of surfaces by fluids or their dewetting plays an important role in numerous processes in production engineering, energy technology and process engineering. This item is printed on demand. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.…