Kropp jörg (20 resultados)

Softcover. 89 S. Sehr guter Zustand. Die Leseseiten sind sauber und ohne Markierungen. Leichte Lager- und Gebrauchsspuren. Ansonsten sehr gutesExemplar. 9783932102257 Sprache: Deutsch Gewicht in Gramm: 1000.

Condición: New. In English.

Condición: New.

Gebunden. Condición: New.

Condición: New. In English.

Paperback. Condición: Brand New. 576 pages. 9.25x6.10x1.30 inches. In Stock.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - From July 10th through July 13th, 1994, an informal workshop co-organized by RILEM committees 116-PCD and 123-MME was held at Saint-Remy-Ies Chevreuse, France, and attended by 38 delegates from 16 countries. Twenty-nine papers were presented, converging the general subjects of modelling micro structures and predicting durability of concrete and other cement-based materials. A short summary follows: G. M. Idom's paper entitled 'Modelling Research for Concrete Engineering' serves as an introduction to the workshop, presenting an overview of modelling research with the conelusion that the broad practica1 objective is to produce high-quality concrete. This means that many characteristics, ranging from rheology to alkali-silica reaction, must be modelled. In other words, the system must be understood. Idom's paper sets the stage for papers in two general areas: 1) models and 2) transport properties. After this, abrief survey of the develop ment of microstructurally-based models is presented. A elose relationship between computer power and speed is suggested. The first group of papers on models covers the subjects of scale and resolution. Most models define and predict characteristics of the pore system, which range in scale from nanometer to millimeter. Various types ofnetworks are proposed in these papers. A good microstructural model must describe the pores and other phases at ascale appropriate to the properties that the model predicts. Also, a good model should be based on fundamental knowledge. In the case of cement-based materials, the important properties may depend on the microstructure, especially the porosity, at several scales. …

Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - From July 10th through July 13th, 1994, an informal workshop co-organized by RILEM committees 116-PCD and 123-MME was held at Saint-Remy-Ies Chevreuse, France, and attended by 38 delegates from 16 countries. Twenty-nine papers were presented, converging the general subjects of modelling micro structures and predicting durability of concrete and other cement-based materials. A short summary follows: G. M. Idom's paper entitled 'Modelling Research for Concrete Engineering' serves as an introduction to the workshop, presenting an overview of modelling research with the conelusion that the broad practica1 objective is to produce high-quality concrete. This means that many characteristics, ranging from rheology to alkali-silica reaction, must be modelled. In other words, the system must be understood. Idom's paper sets the stage for papers in two general areas: 1) models and 2) transport properties. After this, abrief survey of the develop ment of microstructurally-based models is presented. A elose relationship between computer power and speed is suggested. The first group of papers on models covers the subjects of scale and resolution. Most models define and predict characteristics of the pore system, which range in scale from nanometer to millimeter. Various types ofnetworks are proposed in these papers. A good microstructural model must describe the pores and other phases at ascale appropriate to the properties that the model predicts. Also, a good model should be based on fundamental knowledge. In the case of cement-based materials, the important properties may depend on the microstructure, especially the porosity, at several scales.…

Condición: Sehr gut. Zustand: Sehr gut | Produktart: Bücher | Keine Beschreibung verfügbar.

Ohne Stempel, keine An-und Unterstreichungen, guter Zustand. Softcover. Original kartoniert. Kein Versand aufgrund von EPR Regelungen in EU-Länder außerhalb Deutschlands. No shipping to EU countries outside of Germany due to EPR regulations.

Condición: gut. 2010. Und sollen auch die ulnner und ir erben ? pfleger und getruwe zu seher sin des spittals": Kapelle und Hospitalstiftung der Ulner von Diebur in Weinheim In deutscher Sprache. pages.

Couverture rigide. Condición: Comme neuf. Edition originale. Genève 1989. 1 Volume/1. -- Edition Facsimile -- Comme Neuf -- Reliure éditeur cartonnée pleine toile havane. Titre doré. Collection "Cahiers d'Orientalisme". Format in-4°( 29,7 x 21 cm ). ------- 532 pages + 53 planches illustrées . ********************* Présentation éditeur : "" En 1936, C. Schmidt publiait, en collaboration avec W. Schubart, un important témoin grec des Acta Pauli d'après un papyrus appartenant à la Staats- und Universitätsbibliothek de Hambourg: 11 pages fragmentaires sur lesquelles court un texte acéphale nous restituant partiellement une recension primitive de ces Actes. Cinquante ans après que cette retentissante publication eut vu le jour, les autres feuillets du papyrus, dont on ne connaissait que sommairement le contenu, étaient encore à éditer. Outre les Actes apocryphes de Paul, ce manuscrit bilingue renferme en effet, dans son état actuel, trois Livres de l'Ancien Testament, à savoir le Cantique des Cantiques en copte (7 pages), les Lamentations de Jérémie en copte (10 pages), l'Ecclésiaste en copte (14 pages) et en grec, desinit mutilus (14 pages). Les Cahiers d'orientalisme ont le plaisir et l'avantage de présenter aux lecteurs, publiés et discutés pour la première fois, ces précieux documents. Il est à peine nécessaire d'insister sur la valeur intrinsèque de cet inestimable papyrus de Hambourg, que Kahle pouvait déjà dater du IIIe-IVe siècle. Rares sont les papyri grecs ou coptes qui peuvent rivaliser d'antiquité et d'autorité avec le nôtre. Faut-il préciser que celui-ci est l'un des plus anciens manuscrits coptes au monde et l'un des plus longs , nous livrant la plus grande portion de trois Livres vétérotestamentaires dans un subdialiecte des plus archaïques? L'édition elle-même, confiée en premier lieu au P. Angelicus M. Kropp, pour la partie copte, et à C. Voigt, pour la partie grecque, reprise et réactualisée, après leur mort, par B. J. Diebner et R. Kasser, a pu enfin se réaliser grâce aux efforts conjugés de ces deux derniers savants. Un témoin de cette qualité, apportant une contribution irremplaçable à la critique textuelle des Septante, pourra difficilement être ignoré du bibliste. Le papyrologue, pour sa part, trouvera là matière à enrichir ses connaissances. Le coptisant, bien entendu, ne sera pas en reste: guidé par la recherche de M. Kasser et par ses copieux index, il sera à même d'utiliser ces textes pour l'étude d'un subdialecte jusqu'ici non attesté, ce qui laisse présager une meilleure intelligence de la linguistique copte (et, par elle, de l'égyptologie). "" ****************** Ref fav-055-06 & ya0556. …

Condición: Hervorragend. Zustand: Hervorragend | Produktart: Bücher | Keine Beschreibung verfügbar.

Softcover. Condición: gut. Festigkeitsverhalten und Strukturänderungen von Beton bei Temperaturbeanspruchung bis 2500 C In deutscher Sprache. pages.

Taschenbuch. Condición: Neu. The Modelling of Microstructure and its Potential for Studying Transport Properties and Durability | H. Jennings (u. a.) | Taschenbuch | Einband - flex.(Paperback) | Englisch | 2010 | Springer Netherland | EAN 9789048146536 | Verantwortliche Person für die EU: Springer Netherlands, Haberstr. 7, 69126 Heidelberg, buchhandel-buch[at]springer[dot]com | Anbieter: preigu Print on Demand.…

Buch. Condición: Neu. The Modelling of Microstructure and its Potential for Studying Transport Properties and Durability | H. Jennings (u. a.) | Buch | Einband - fest (Hardcover) | Englisch | 1995 | Springer Netherland | EAN 9780792338529 | Verantwortliche Person für die EU: Springer Netherlands, Haberstr. 7, 69126 Heidelberg, buchhandel-buch[at]springer[dot]com | Anbieter: preigu Print on Demand. …

Buch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -From July 10th through July 13th, 1994, an informal workshop co-organized by RILEM committees 116-PCD and 123-MME was held at Saint-Remy-Ies Chevreuse, France, and attended by 38 delegates from 16 countries. Twenty-nine papers were presented, converging the general subjects of modelling micro structures and predicting durability of concrete and other cement-based materials. A short summary follows: G. M. Idom's paper entitled 'Modelling Research for Concrete Engineering' serves as an introduction to the workshop, presenting an overview of modelling research with the conelusion that the broad practica1 objective is to produce high-quality concrete. This means that many characteristics, ranging from rheology to alkali-silica reaction, must be modelled. In other words, the system must be understood. Idom's paper sets the stage for papers in two general areas: 1) models and 2) transport properties. After this, abrief survey of the develop ment of microstructurally-based models is presented. A elose relationship between computer power and speed is suggested. The first group of papers on models covers the subjects of scale and resolution. Most models define and predict characteristics of the pore system, which range in scale from nanometer to millimeter. Various types ofnetworks are proposed in these papers. A good microstructural model must describe the pores and other phases at ascale appropriate to the properties that the model predicts. Also, a good model should be based on fundamental knowledge. In the case of cement-based materials, the important properties may depend on the microstructure, especially the porosity, at several scales.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 574 pp. Englisch. …

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -From July 10th through July 13th, 1994, an informal workshop co-organized by RILEM committees 116-PCD and 123-MME was held at Saint-Remy-Ies Chevreuse, France, and attended by 38 delegates from 16 countries. Twenty-nine papers were presented, converging the general subjects of modelling micro structures and predicting durability of concrete and other cement-based materials. A short summary follows: G. M. Idom's paper entitled 'Modelling Research for Concrete Engineering' serves as an introduction to the workshop, presenting an overview of modelling research with the conelusion that the broad practica1 objective is to produce high-quality concrete. This means that many characteristics, ranging from rheology to alkali-silica reaction, must be modelled. In other words, the system must be understood. Idom's paper sets the stage for papers in two general areas: 1) models and 2) transport properties. After this, abrief survey of the develop ment of microstructurally-based models is presented. A elose relationship between computer power and speed is suggested. The first group of papers on models covers the subjects of scale and resolution. Most models define and predict characteristics of the pore system, which range in scale from nanometer to millimeter. Various types ofnetworks are proposed in these papers. A good microstructural model must describe the pores and other phases at ascale appropriate to the properties that the model predicts. Also, a good model should be based on fundamental knowledge. In the case of cement-based materials, the important properties may depend on the microstructure, especially the porosity, at several scales.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 576 pp. Englisch.…

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -From July 10th through July 13th, 1994, an informal workshop co-organized by RILEM committees 116-PCD and 123-MME was held at Saint-Remy-Ies Chevreuse, France, and attended by 38 delegates from 16 countries. Twenty-nine papers were presented, converging the general subjects of modelling micro structures and predicting durability of concrete and other cement-based materials. A short summary follows: G. M. Idom's paper entitled 'Modelling Research for Concrete Engineering' serves as an introduction to the workshop, presenting an overview of modelling research with the conelusion that the broad practica1 objective is to produce high-quality concrete. This means that many characteristics, ranging from rheology to alkali-silica reaction, must be modelled. In other words, the system must be understood. Idom's paper sets the stage for papers in two general areas: 1) models and 2) transport properties. After this, abrief survey of the develop ment of microstructurally-based models is presented. A elose relationship between computer power and speed is suggested. The first group of papers on models covers the subjects of scale and resolution. Most models define and predict characteristics of the pore system, which range in scale from nanometer to millimeter. Various types ofnetworks are proposed in these papers. A good microstructural model must describe the pores and other phases at ascale appropriate to the properties that the model predicts. Also, a good model should be based on fundamental knowledge. In the case of cement-based materials, the important properties may depend on the microstructure, especially the porosity, at several scales. 576 pp. Englisch.…

Buch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -From July 10th through July 13th, 1994, an informal workshop co-organized by RILEM committees 116-PCD and 123-MME was held at Saint-Remy-Ies Chevreuse, France, and attended by 38 delegates from 16 countries. Twenty-nine papers were presented, converging the general subjects of modelling micro structures and predicting durability of concrete and other cement-based materials. A short summary follows: G. M. Idom's paper entitled 'Modelling Research for Concrete Engineering' serves as an introduction to the workshop, presenting an overview of modelling research with the conelusion that the broad practica1 objective is to produce high-quality concrete. This means that many characteristics, ranging from rheology to alkali-silica reaction, must be modelled. In other words, the system must be understood. Idom's paper sets the stage for papers in two general areas: 1) models and 2) transport properties. After this, abrief survey of the develop ment of microstructurally-based models is presented. A elose relationship between computer power and speed is suggested. The first group of papers on models covers the subjects of scale and resolution. Most models define and predict characteristics of the pore system, which range in scale from nanometer to millimeter. Various types ofnetworks are proposed in these papers. A good microstructural model must describe the pores and other phases at ascale appropriate to the properties that the model predicts. Also, a good model should be based on fundamental knowledge. In the case of cement-based materials, the important properties may depend on the microstructure, especially the porosity, at several scales. 574 pp. Englisch. …