Korval darien (6 resultados)

Taschenbuch. Condición: Neu. Neuware.

Paperback. Condición: new. Paperback. Every force applied by a wheel to a rail must travel a complete and continuous load path from contact patch to subgrade. That single engineering premise runs through every chapter of this handbook, and it is the reason a track engineer who understands where the equations come from will always outperform one who can only apply them.Railway track is the most heavily loaded, most precisely toleranced, and most widely distributed civil engineering structure in existence. A single meter of main-line track carries tens of thousands of gross tons per year; the cumulative mechanical demand over a 30-year design life is extraordinary. Yet the track must simultaneously maintain geometric tolerances measured in millimetres, because deviations of only a few millimetres in rail level, alignment, or gauge can excite vehicle dynamics that escalate into derailment risk. That combination of structural demand and geometric precision is what makes permanent way engineering far more demanding than it first appears, and what makes a derivation-based handbook essential.This handbook covers the complete engineering of the railway track in fifteen chapters, from the load model that begins every design through structural analysis, materials, geometry, substructure, switches and crossings, vehicle-track dynamics, maintenance, rail defect management, urban track systems, and whole-life cost. Two standards frameworks run in parallel throughout: AREMA and FRA 49 CFR Part 213 for US practice; Network Rail Standards and the EN series for UK and European practice. Both are treated as two dialects of the same engineering language, cross-referenced at every significant junction.The approach throughout is to show the work. Every equation is derived from stated assumptions. Every worked example carries units through every step and every intermediate result to a final answer. Practice problems graded in difficulty, with fully worked solutions, close every chapter. The result is a resource that develops engineering judgment, not only procedural competence.Readers working through this handbook will develop the analytical ability to: Derive and apply the Winkler beam-on-elastic-foundation model, thermal force and buckling analysis for continuously welded rail, and Hertzian contact mechanics at the wheel-rail interfaceSize ballast depth, formation bearing capacity, and subballast specification using the Boussinesq stress distribution modelDesign track geometry including cant, clothoid transition curves, and vertical alignment to FRA and EN standards simultaneouslyAnalyse turnout geometry, crossing stress, and vehicle dynamics through switches and crossingsSpecify track for high-speed and heavy-haul applications, and manage the competing constraints between themApply fracture mechanics, rolling contact fatigue analysis, and ultrasonic inspection strategy to rail defect managementModel whole-life cost using net present value analysis and make economically defensible renewal and rehabilitation decisionsWritten for practising railway engineers, postgraduate students, and upper-level civil engineering undergraduates seeking a rigorous, derivation-based treatment of track mechanics, this handbook is the single-volume engineering reference the permanent way profession has been missing.Get your copy and build the analytical foundation that makes every design decision traceable, every maintenance judgment defensible, and every standard limit physically meaningful. This item is printed on demand. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Condición: New. Print on Demand.

PAP. Condición: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

PAP. Condición: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

Paperback. Condición: new. Paperback. Every force applied by a wheel to a rail must travel a complete and continuous load path from contact patch to subgrade. That single engineering premise runs through every chapter of this handbook, and it is the reason a track engineer who understands where the equations come from will always outperform one who can only apply them.Railway track is the most heavily loaded, most precisely toleranced, and most widely distributed civil engineering structure in existence. A single meter of main-line track carries tens of thousands of gross tons per year; the cumulative mechanical demand over a 30-year design life is extraordinary. Yet the track must simultaneously maintain geometric tolerances measured in millimetres, because deviations of only a few millimetres in rail level, alignment, or gauge can excite vehicle dynamics that escalate into derailment risk. That combination of structural demand and geometric precision is what makes permanent way engineering far more demanding than it first appears, and what makes a derivation-based handbook essential.This handbook covers the complete engineering of the railway track in fifteen chapters, from the load model that begins every design through structural analysis, materials, geometry, substructure, switches and crossings, vehicle-track dynamics, maintenance, rail defect management, urban track systems, and whole-life cost. Two standards frameworks run in parallel throughout: AREMA and FRA 49 CFR Part 213 for US practice; Network Rail Standards and the EN series for UK and European practice. Both are treated as two dialects of the same engineering language, cross-referenced at every significant junction.The approach throughout is to show the work. Every equation is derived from stated assumptions. Every worked example carries units through every step and every intermediate result to a final answer. Practice problems graded in difficulty, with fully worked solutions, close every chapter. The result is a resource that develops engineering judgment, not only procedural competence.Readers working through this handbook will develop the analytical ability to: Derive and apply the Winkler beam-on-elastic-foundation model, thermal force and buckling analysis for continuously welded rail, and Hertzian contact mechanics at the wheel-rail interfaceSize ballast depth, formation bearing capacity, and subballast specification using the Boussinesq stress distribution modelDesign track geometry including cant, clothoid transition curves, and vertical alignment to FRA and EN standards simultaneouslyAnalyse turnout geometry, crossing stress, and vehicle dynamics through switches and crossingsSpecify track for high-speed and heavy-haul applications, and manage the competing constraints between themApply fracture mechanics, rolling contact fatigue analysis, and ultrasonic inspection strategy to rail defect managementModel whole-life cost using net present value analysis and make economically defensible renewal and rehabilitation decisionsWritten for practising railway engineers, postgraduate students, and upper-level civil engineering undergraduates seeking a rigorous, derivation-based treatment of track mechanics, this handbook is the single-volume engineering reference the permanent way profession has been missing.Get your copy and build the analytical foundation that makes every design decision traceable, every maintenance judgment defensible, and every standard limit physically meaningful. This item is printed on demand. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.…