john keates (56 resultados)

Paperback. Condición: Good. Good - Bumped and creased book with tears to the extremities, but not affecting the text block, may have remainder mark or previous owner's name - GOOD PAPERBACK Standard-sized.

Condición: Very Good. Very Good condition. With remainder mark. A copy that may have a few cosmetic defects. May also contain light spine creasing or a few markings such as an owner's name, short gifter's inscription or light stamp.

Condición: Very Good. This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. .

Soft cover. Condición: Near Fine. Softcover in glossy, excellent, unmarked, next-to-pristine condition (slightest handling). 80 pages. [4oz]. Book.

Condición: Very Good. Shipped within 24 hours from our UK warehouse. Clean, undamaged book with no damage to pages and minimal wear to the cover. Spine still tight, in very good condition. Remember if you are not happy, you are covered by our 100% money back guarantee.

Paperback. Condición: Very Good. Trade pbk.; unmarked; no bent / torn pp.; cover and spine, fine.

Soft cover. Condición: Near Fine. 1st Edition. Near fine condition. Some minor edge wear to cover.

Cloth. Condición: Good. Numbered Limited Edition. 1st edition, limited and numbered, this being #934. SIGNED. A Good copy. 8vo., 57 pp. Bound in blue cloth with title on the front board. The boards are rubbed and soiled, with the lettering faded. The front hinge is cracked, just before the title page. SIGNED by the author on the limitation page. A Good copy.

Soft cover. Condición: Near Fine. No Jacket. John Keates Ilustrador. First Edition. Small dent back cover, one corner slightly curved. Introduction by Jeff VanderMeer, stories by Liz Williams, Adam Roberts, Neil Ayres, Richard Kunzmann, Chris Butler, James Lovegrove, Ed Clayton, Conrad Williams, Marion Arnott, Roger Levy. 51 pages.

John Keates Ilustrador. Birmingham: British Fantasy Society:, 2008. First edition, TPBO, Trade paperback, Fine, 50 pp. Cover artwork by: John Keates First edition, TPBO, Trade paperback, Fine,

8° Pappeinband. ohne Schutzumschlag kleinere Gebrauchsspuren an Einband und Block Block sauber und fest ohne handschriftliche Einträge 30 Deutsch 340g.

Hardcover. Condición: Fine. KARLIN, Eugene Ilustrador. 1st thus. Fine condition, octavo, quarter brown leather, brown cloth boards, gilt decorated front and rear, four raised bands and gilt title and decoration to spine, all edges gilt, silk ribbon marker, decorated end paper, xxv plus 461 pages including index of first lines. [QP].

Couverture rigide. Condición: bon. RO30330229: 1981. In-Folio. Relié. Bon état, Couv. convenable, Dos satisfaisant, Intérieur frais. 93 pages. Nombreuses photos en couleurs, in et hors texte. Jaquette correcte. Rares rousseurs. Avec Jaquette. . . Classification Dewey : 945-Italie.

Condición: Bon. Merci, votre achat aide à financer des programmes de lutte contre l'illettrisme.

Condición: New. pp. 244.

Condición: New. In.

Softcover. Condición: Gut. Gebraucht - Gut 227 p. About this Book: Inclusive design, universal design and universal access are long standing, familiar terms with clear and laudable goals. However, their teaching and industrial uptake has been very limited. Many products still exclude users unnecessarily for reasons ranging from corporate insensitivity and the size of the market for inclusive products to the individual designer's inability to design them. This pragmatic approach to making inclusive design desirable to industry addresses these issues and discusses why existing methods have failed to be assimilated into industry. Featuring: - The concept of design exclusion - Definition and specification of target populations - The prevalence of impairments in a population - Quantifying the number of people excluded - Proposals for new design approaches, tools and techniques - Assessment of a design's inclusivity - An introduction to current legislation - Making inclusive design desirable to industry Through the use of case studies and examples, Countering Design Exclusion introduces the mind-set necessary to think through the challenges raised by inclusive design and to adapt their solutions to the needs of particular companies. The practical outlook will appeal to anyone who wishes to take account of the largest possible part of the population in their designs. Written for Practitioners and researchers in engineering design, advanced undergraduate and early graduate students in design, libraries, policy makers in areas involving accessibility, employers having to implement policies involving accessibility.

Condición: New. pp. 324.

Taschenbuch. Condición: Neu. Universal Access and Assistive Technology | Proceedings of the Cambridge Workshop on UA and AT '02 | Simeon Keates (u. a.) | Taschenbuch | xiv | Englisch | 2013 | Springer London | EAN 9781447137214 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Condición: New. In.

Condición: New. In.

Condición: New. In.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - The first Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT) was held at Trinity Hall, Cambridge, in March 2002. It was inspired by the earlier, highly successful Cambridge Workshops on Rehabilitation Robotics organised by the late Robin Jackson. Robin was the founder of Rehabilitation Research at Cambridge which now continues in the Engineering Design Centre within the Department of Engineering, led by John Clarkson and Simeon Keates, and in the Rainbow Group within the Computer Laboratory led by Peter Robinson. CWUAAT represents the first in a new series of workshops that we are aiming to hold every two years which, reflecting the spirit of recent moves to extend the rights for universal accessibility, will encourage discussion of a broad range of interests. There will be a general focus on product/solution development. Hence it is intended that the principal requirements for the successful design of assistive technology shall be addressed, where these range from the identification and capture of the needs of the users, through to the development and evaluation of truly usable and accessible systems for users with special needs. The best submissions received for the first CWUAAT are contained in this book, where the contributors are all leading researchers in the fields of Universal Access and Assistive Technology and represent a large part of the international research community. They include, though not exclusively, computer scientists, designers, engineers, industrial representatives, ergonomists and sociologists.

Paperback. Condición: Brand New. 320 pages. 9.02x5.98x0.73 inches. In Stock.

Paperback. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: New. pp. 284.

Taschenbuch. Condición: Neu. Designing a More Inclusive World | Simeon Keates (u. a.) | Taschenbuch | xiii | Englisch | 2012 | Springer | EAN 9781447110460 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Condición: New. pp. 284.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Designing inclusively is no longer an option for companies. It is a business essential. Global populations are getting older, legislation is increasingly prohibitive of unnecessary exclusion and consumer attitudes are beginning to change. Exclusivity is out, inclusivity is in. Research communities the world over are responding to this change in design emphasis. Conferences such as the Cambridge Workshops on Universal Access and Assistive Technology (CWUAAT) offer a forum for researchers from diverse and varied disciplines to bring their perspectives on inclusive design together. This book has been inspired by the second CWUAAT, held in Cambridge, England in March 2004. It contains chapters from an international group of leading researchers in this field. Contributions focus on the following topics:design issues for universal access and assistive technology;enabling computer access and new technologies; and,assistive technology and rehabilitation robotics. This series of conferences is aimed at a broad range of interests, with a general focus on the development of products and solutions. Numerous case studies are used to raise awareness of the challenges faced in developing truly inclusive products, along with examples of good practice for design for a more inclusive world.

Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Designing inclusively is no longer an option for companies. It is a business essential. Global populations are getting older, legislation is increasingly prohibitive of unnecessary exclusion and consumer attitudes are beginning to change. Exclusivity is out, inclusivity is in. Research communities the world over are responding to this change in design emphasis. Conferences such as the Cambridge Workshops on Universal Access and Assistive Technology (CWUAAT) offer a forum for researchers from diverse and varied disciplines to bring their perspectives on inclusive design together. This book has been inspired by the second CWUAAT, held in Cambridge, England in March 2004. It contains chapters from an international group of leading researchers in this field. Contributions focus on the following topics:design issues for universal access and assistive technology;enabling computer access and new technologies; and,assistive technology and rehabilitation robotics. This series of conferences is aimed at a broad range of interests, with a general focus on the development of products and solutions. Numerous case studies are used to raise awareness of the challenges faced in developing truly inclusive products, along with examples of good practice for design for a more inclusive world.