Islam shyha (55 resultados)

Oversized paperback. Condición: Very good. First Edition. This is the printed copy of Professor Shyha's PhD thesis. It is a bound copy with illustrations and graphs etc. included. There are appendices and an extensive reference section. 231pp The book is clean and there are no obvious highlighted words or added comments. It is a heavy book and may cost more to send abroad. The price reflects that this book is not our more usual genre.…

Taschenbuch. Condición: Neu. Drilling of Carbon Fibre Reinforced Plastic Composites | Islam Shyha | Taschenbuch | 260 S. | Englisch | 2018 | LAP LAMBERT Academic Publishing | EAN 9783659671227 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu. …

Condición: As New. Unread book in perfect condition.

Condición: New.

Paperback. Condición: Brand New. 260 pages. 8.66x5.91x0.59 inches. In Stock.

Condición: New.

Condición: As New. Unread book in perfect condition.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book covers a wide range of conventional and non-conventional machining processes of various composite materials, including polymer and metallic-based composites, nanostructured composites and green/natural composites. It presents state-of-the-art academic work and industrial developments in material fabrication, machining, modelling and applications, together with current practices and requirements for producing high-quality composite components. There are also dedicated chapters on physical properties and fabrication techniques of different composite material groups. The book also has chapters on health and safety considerations when machining composite materials and recycling composite materials. The contributors present machining composite materials in terms of operating conditions; cutting tools; appropriate machines; and typical damage patterns following machining operations.This book serves as a useful reference for manufacturing engineers, productionsupervisors, tooling engineers, planning and application engineers, and machine tool designers. It can also benefit final-year undergraduate and postgraduate students, as it provides comprehensive information on the machining of composite materials to produce high-quality final components. The book chapters were authored by experienced academics and researchers from four continents and nine countries including Canada, China, Egypt, India, Malaysia, Portugal, Singapore, United Kingdom and the USA.…

Taschenbuch. Condición: Neu. Advances in Machining of Composite Materials | Conventional and Non-conventional Processes | Islam Shyha (u. a.) | Taschenbuch | Engineering Materials | vi | Englisch | 2022 | Springer | EAN 9783030714406 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

Condición: New.

Condición: New. 1st ed. 2021 edition NO-PA16APR2015-KAP.

Condición: New.

Condición: Hervorragend. Zustand: Hervorragend | Seiten: 560 | Sprache: Englisch | Produktart: Bücher | This book covers a wide range of conventional and non-conventional machining processes of various composite materials, including polymer and metallic-based composites, nanostructured composites and green/natural composites. It presents state-of-the-art academic work and industrial developments in material fabrication, machining, modelling and applications, together with current practices and requirements for producing high-quality composite components. There are also dedicated chapters on physical properties and fabrication techniques of different composite material groups. The book also has chapters on health and safety considerations when machining composite materials and recycling composite materials. The contributors present machining composite materials in terms of operating conditions; cutting tools; appropriate machines; and typical damage patterns following machining operations. This book serves as a useful reference for manufacturing engineers, productionsupervisors, tooling engineers, planning and application engineers, and machine tool designers. It can also benefit final-year undergraduate and postgraduate students, as it provides comprehensive information on the machining of composite materials to produce high-quality final components. The book chapters were authored by experienced academics and researchers from four continents and nine countries including Canada, China, Egypt, India, Malaysia, Portugal, Singapore, United Kingdom and the USA.…

Condición: As New. Unread book in perfect condition.

Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book covers a wide range of conventional and non-conventional machining processes of various composite materials, including polymer and metallic-based composites, nanostructured composites and green/natural composites. It presents state-of-the-art academic work and industrial developments in material fabrication, machining, modelling and applications, together with current practices and requirements for producing high-quality composite components. There are also dedicated chapters on physical properties and fabrication techniques of different composite material groups. The book also has chapters on health and safety considerations when machining composite materials and recycling composite materials. The contributors present machining composite materials in terms of operating conditions; cutting tools; appropriate machines; and typical damage patterns following machining operations.This book serves as a useful reference for manufacturing engineers, productionsupervisors, tooling engineers, planning and application engineers, and machine tool designers. It can also benefit final-year undergraduate and postgraduate students, as it provides comprehensive information on the machining of composite materials to produce high-quality final components. The book chapters were authored by experienced academics and researchers from four continents and nine countries including Canada, China, Egypt, India, Malaysia, Portugal, Singapore, United Kingdom and the USA. …

Condición: New.

Hardcover. Condición: Brand New. 558 pages. 9.25x6.10x1.19 inches. In Stock.

Condición: New.

Taschenbuch. Condición: Neu. Perçage des composites plastiques renforcés de fibres de carbone | Islam Shyha | Taschenbuch | Französisch | 2022 | Editions Notre Savoir | EAN 9786205164150 | Verantwortliche Person für die EU: SIA OmniScriptum Publishing, Brivibas Gatve 197, 1039 RIGA, LETTLAND, customerservice[at]vdm-vsg[dot]de | Anbieter: preigu. …

Condición: New.

Condición: New.

Taschenbuch. Condición: Neu. Perfuração de Compósitos Plásticos Reforçados com Fibra de Carbono | Islam Shyha | Taschenbuch | Portugiesisch | 2022 | Edições Nosso Conhecimento | EAN 9786205164181 | Verantwortliche Person für die EU: SIA OmniScriptum Publishing, Brivibas Gatve 197, 1039 RIGA, LETTLAND, customerservice[at]vdm-vsg[dot]de | Anbieter: preigu. …

Taschenbuch. Condición: Neu. Foratura di compositi plastici rinforzati con fibra di carbonio | Islam Shyha | Taschenbuch | Italienisch | 2022 | Edizioni Sapienza | EAN 9786205164174 | Verantwortliche Person für die EU: SIA OmniScriptum Publishing, Brivibas Gatve 197, 1039 RIGA, LETTLAND, customerservice[at]vdm-vsg[dot]de | Anbieter: preigu. …

Taschenbuch. Condición: Neu. Bohren von kohlenstofffaserverstärkten Kunststoffverbundwerkstoffen | Islam Shyha | Taschenbuch | 260 S. | Deutsch | 2022 | Verlag Unser Wissen | EAN 9786205164143 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu. …

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Following an extensive literature survey focusing on the machinability of carbon fibre reinforced plastics (CFRP), three main phases of experimental work were undertaken to evaluate the drilling of CFRP and associated stack materials. Phase 1 and 2 involved small diameter holes (1.5 mm) in thin CFRP laminates (3 mm thick) while Phase 3 addressed the feasibility of one-shot drilling (6.35 mm diameter holes) in multilayer workpiece stacks comprising titanium, CFRP and aluminium. Machinability was assessed in terms of tool life/wear, force/torque, hole size and geometrical accuracy, workpiece surface integrity and chip morphology. Initial trials (Phase 1A) were performed to investigate the effect of peel ply layers (~100 mim thick nylon sheet attached on both sides of the laminate to assist the bleeding of volatiles and air during curing as well as preventing surface contamination) on hole entry and exit quality, as current industrial practice involves removal of the protective sheet prior to drilling. 260 pp. Englisch.…

Condición: new. Questo è un articolo print on demand.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Shyha IslamDr. Shyha has over 14 years of experience in teaching and research at higher education. His main research fields include machinability/surface integrity analysis of advanced workpiece materials, conventional and non-conven.…

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Following an extensive literature survey focusing on the machinability of carbon fibre reinforced plastics (CFRP), three main phases of experimental work were undertaken to evaluate the drilling of CFRP and associated stack materials. Phase 1 and 2 involved small diameter holes (1.5 mm) in thin CFRP laminates (3 mm thick) while Phase 3 addressed the feasibility of one-shot drilling (6.35 mm diameter holes) in multilayer workpiece stacks comprising titanium, CFRP and aluminium. Machinability was assessed in terms of tool life/wear, force/torque, hole size and geometrical accuracy, workpiece surface integrity and chip morphology. Initial trials (Phase 1A) were performed to investigate the effect of peel ply layers (~100 mim thick nylon sheet attached on both sides of the laminate to assist the bleeding of volatiles and air during curing as well as preventing surface contamination) on hole entry and exit quality, as current industrial practice involves removal of the protective sheet prior to drilling.…

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Following an extensive literature survey focusing on the machinability of carbon fibre reinforced plastics (CFRP), three main phases of experimental work were undertaken to evaluate the drilling of CFRP and associated stack materials. Phase 1 and 2 involved small diameter holes (1.5 mm) in thin CFRP laminates (3 mm thick) while Phase 3 addressed the feasibility of one-shot drilling (6.35 mm diameter holes) in multilayer workpiece stacks comprising titanium, CFRP and aluminium. Machinability was assessed in terms of tool life/wear, force/torque, hole size and geometrical accuracy, workpiece surface integrity and chip morphology. Initial trials (Phase 1A) were performed to investigate the effect of peel ply layers (~100 ¿m thick nylon sheet attached on both sides of the laminate to assist the bleeding of volatiles and air during curing as well as preventing surface contamination) on hole entry and exit quality, as current industrial practice involves removal of the protective sheet prior to drilling.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 260 pp. Englisch.…

Condición: new. Questo è un articolo print on demand.