Anderl reiner (113 resultados)

162 figs., XXX, 319 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

Condición: Sehr gut. 120 Seiten In very good condition. ISBN: 9783540539438 Sprache: Englisch Gewicht in Gramm: 221 17,0 x 0,7 x 24,4 cm, softcover.

Condición: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,700grams, ISBN:9781852339036.

Condición: New.

Condición: As New. Unread book in perfect condition.

Condición: New. In English.

Condición: New. pp. 120.

Paperback. Condición: Brand New. 1st edition. 119 pages. 9.61x6.69x0.28 inches. In Stock.

Softcover. Condición: Neu. Neu Schnelle Lieferung, Kartonverpackung. Abzugsfähige Rechnung. Bei Mehrfachbestellung werden die Versandkosten anteilig erstattet. -Die Normenreihe ISO 10303 (STEP) bildet die wesentliche Grundlage der Produktdatentechnologie. Vor diesem Hintergrund stellt die Einführung von STEP für alle technischen Unternehmen sowie auch die Weiterentwicklung der Produktdatennorm eine große Herausforderung im Arbeitsfeld Logistik, Materialfluss und Informationslogistik dar. Das vorliegende Buch bietet einen fundierten Einblick. Es werden die thematischen Schwerpunkte wie Leistungsumfang, Implementierung und Normung betrachtet und bewertet. Beispiele aus der industriellen Einführung und Anwendung von STEP runden das Gesamtbild ab und stellen den Praxisbezug her. 245 pp. Deutsch.…

4., überarbeitete Auflage. VII, 429 Seiten : Illustrationen ; 24 cm + 1 CD-ROM ISBN 9783446444898 Der Versand erfolgt innerhalb von 2 Werktagen.Bei Gewicht - wird bei Buchtitel angezeigt - ab 1000 Gramm = 7 Euro Portoanteil in D, EU = 20 Euro, WELT BITTE V O R BESTELUNG ERFRAGEN! NO SHIPPING TO THE UNITED STATES FOR US POSSIBLE. Über 2000 Titel wurden wegen Lagerauflösung reduziert - erkennbar meist an der Preisendziffer "9". Sprache: Deutsch Gewicht in Gramm: 1091 Gebundener Originalpappband.Gutes Exemplar.…

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Reiner Anderl The Advanced Modelling part of the CAD\*I project aimed at the development of a new generation of modelling techniques as a basic functionality of future CAD/CAM systems. The methodology and concepts for advanced modelling techniques, their availability in the communication interface of a CAD/CAM system and their influence on internal interfaces in the software architecture of a CAD/CAM system are fundamental results of advanced modelling work. These results form the basis for the development of a new generation of CAD/CAM systems which are called product modelling systems. CAD/CAM systems today mainly support the geometric description of a technical part or its description as a technical drawing. Advanced geometric modelling capabilities deal with parametric design functions embedded into CAD/CAM systems. However, development strategies for future CAD/CAM systems are directed toward the following: 1. The development of product modelling systems and 2. the development of integrated systems based on CAD, CAP (Computer Aided Planning), CAM and other CIM (Computer Integrated Manu facturing) functionalities.; This volume presents the results of research work performed within ESPRIT Project 322 'CAD Interfaces (CAD I)'. It describes the concept for a methodology and guidelines to extend geometric modelling systems by modelling functions for the design of technical products. These functions are based on providing more semantics and design operations. A two-level concept for extending geometric modelling functions is presented: geometric associative functions and technical functions reflecting technical terms and technical form features are defined. For the implementation of an advanced modelling system, a specification for procedural interfaces and the description of a user interface are given as typical examples. Dieser ESPRIT-Bericht beschreibt ein Konzept zur Erweiterung von Funktionen der Geometrischen Modellierung auf technische Anwendungen. Es wird ein Stufenkonzept vorgestellt, das aufbauend auf geometrischen Funktionen zunächst geometrisch-assoziative und sodann technische Funktionen spezifiziert.…

Condición: New.

Condición: New.

Condición: New.

HRD. Condición: New. New Book. Shipped from UK. Established seller since 2000.

Condición: Gut. Zustand: Gut | Sprache: Englisch | Produktart: Bücher | Reiner Anderl The Advanced Modelling part of the CAD*I project aimed at the development of a new generation of modelling techniques as a basic functionality of future CAD/CAM systems. The methodology and concepts for advanced modelling techniques, their availability in the communication interface of a CAD/CAM system and their influence on internal interfaces in the software architecture of a CAD/CAM system are fundamental results of advanced modelling work. These results form the basis for the development of a new generation of CAD/CAM systems which are called product modelling systems. CAD/CAM systems today mainly support the geometric description of a technical part or its description as a technical drawing. Advanced geometric modelling capabilities deal with parametric design functions embedded into CAD/CAM systems. However, development strategies for future CAD/CAM systems are directed toward the following: 1. The development of product modelling systems and 2. the development of integrated systems based on CAD, CAP (Computer Aided Planning), CAM and other CIM (Computer Integrated Manu­ facturing) functionalities.…

Hardcover. Condición: Brand New. 2nd har/psc edition. 388 pages. 9.00x7.50x1.00 inches. In Stock.

Condición: New.

Condición: New.

Kombiprodukt. Condición: Neu. Neuware - Testing and optimizing digital products with Siemens NX and Simcenter 3DIn times of Industry 4.0 the digitalization of the value-chain becomes more and more important. The so-called digital twin allows simulations that are very close to reality. This book provides all necessary basics to perform simple as well as complex simulations with NX and Simcenter 3D (former NX CAE). It is aimed at design engineers, CAE engineers and engineering students. The following topics are covered in the book:- Motion Simulation (MBD)- Design Simulation (FEA, Nastran)- Simcenter/Advanced Simulation (FEA, CFD and EM) - Management of Calculation and Simulation Data (Teamcenter for Simulation)Starting off with brief theoretical introductions each chapter contains learning tasks of increasing difficulty. Most of them are based on the CAD model of the legendary Opel RAK2.The presented methods are based on NX 12 and Simcenter 3D, the new 3D CAE solution. Revised topics in this edition are Motion Simulation with the new Simcenter Motion solver and post-processing in Simcenter 3D (FEA).The CAD data and calculation results of all exercises can be found online. The exercises can be completed in NX 11, NX 12 and probably later versions.System requirements for Elektronisches Buch bonus: internet connection and Adobe Acrobat Reader, Elektronisches Buch reader or Adobe Digital Editions.…

Condición: New.

Hardback. Condición: New. Second Edition. Testing and optimizing the performance of digital products with Siemens NX and Simcenter 3DIn times of Industry 4.0 the digitalization of the value-chain becomes more and more important. The so-called digital twin allows simulations that are very close to reality. This book provides all necessary basics to perform simple as well as complex simulations with NX and Simcenter 3D (former NX CAE). It is aimed at design engineers, CAE engineers and engineering students.The following topics are covered in the book:Motion Simulation (MBD)Design Simulation (FEA, Nastran)Simcenter/Advanced Simulation (FEA, CFD and EM) Management of Calculation and Simulation Data (Teamcenter for Simulation)Starting off with brief theoretical introductions each chapter contains learning tasks of increasing difficulty. Most of them are based on the CAD model of the legendary Opel RAK2. The presented methods are based on NX 12 and Simcenter 3D, the new 3D CAE solution. Revised topics in this edition are Motion Simulation with the LMS solver and post-processing in Simcenter (FEA). The CAD data and calculation results of all exercises can be found online. The exercises can be completed in NX 11, NX 12 and probably later versions.…

Condición: New. In times of Industry 4.0 the digitalization of the value-chain becomes more and more important. The so-called digital twin allows simulations that are very close to reality. This book provides all necessary basics to perform simple as well as complex simula.

Condición: As New. Unread book in perfect condition.

Condición: New.

Condición: As New. Unread book in perfect condition.

Condición: As New. Unread book in perfect condition.

Condición: As New. Unread book in perfect condition.

Hardback. Condición: New. New copy - Usually dispatched within 4 working days.

Hardcover. Condición: New. New never used. Cover has minor shelf rubbings.