Organic additives ceramic processing de shanefield daniel (30 resultados)
- Tapa dura
Librería: ThriftBooks-Atlanta, AUSTELL, GA, Estados Unidos de AmericaThriftBooks-Atlanta
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 72,17
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. Condición: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
- Tapa dura
Librería: HPB-Red, Dallas, TX, Estados Unidos de AmericaHPB-Red
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Aceptable
EUR 109,58
Envío por EUR 3,28Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
hardcover. Condición: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority.
- Tapa dura
Librería: Zubal-Books, Since 1961, Cleveland, OH, Estados Unidos de AmericaZubal-Books, Since 1961
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Aceptable
EUR 109,57
Envío por EUR 3,94Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: Good. 330 pp., hardcover, ex library, else text and binding clean and tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country. Photos ava…ilable upon request.
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 142,22
Envío por EUR 14,10Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa dura
Librería: Gian Luigi Fine Books, albany, NY, Estados Unidos de AmericaGian Luigi Fine Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Excelente
EUR 175,94
Envío por EUR 8,50Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. Condición: Fine. SECOND EDITION. "general electric fore-edge stamp, otherwise as new, unread condition.
- Tapa blanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 189,05
Envío por EUR 3,50Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 328.
Más imágenes- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 122,15
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Organic Additives and Ceramic Processing | With Applications in Powder Metallurgy, Ink, and Paint | Daniel J. Shanefield | Taschenbuch | xv | Englisch | 2013 | Springer US | EAN 9781475761054 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]h…artmann[at]springer[dot]com | Anbieter: preigu.
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 146,98
Envío por EUR 62,50Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Organic Additives and Ceramic Processing: With Applications in Powder Metallurgy, Ink, and Paint describes the major manufacturing processes, such as slip casting, tape casting, injection molding, etc. The book covers each subject, including the ce…ramic processes, organic chemical structures, polymers, colloid science and others, starting from fundamental principles, with many literature references for further reading. After the fundamentals, detailed case studies from industrial applications are described for the optimization of solvents, dispersants, binders, plasticizers, lubricants and some minor additives. A wide range of information is covered, beginning with fundamental equations for students, and extending to advanced applications for development workers and factory problem solvers. Shanefield undertook this ambitious task only because of the previous lack of resources that address the growing need for detailed information on organic additives for ceramics. Suitable for use as a textbook and as a reference source for working ceramists and chemists who wish to supply the ceramics industry with additives.
- Tapa dura
Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Bueno
EUR 201,17
Envío por EUR 29,41Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. Condición: Very Good. Very Good. Dust Jacket may NOT BE INCLUDED.CDs may be missing. SHIPS FROM MULTIPLE LOCATIONS. book.
- Tapa dura
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 229,09
Envío por EUR 14,10Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa dura
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 197,62
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Gebunden. Condición: New.
- Tapa dura
Librería: BennettBooksLtd, Los Angeles, CA, Estados Unidos de AmericaBennettBooksLtd
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 261,67
Envío por EUR 6,09Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
hardcover. Condición: New. In shrink wrap. Looks like an interesting title.
- Tapa dura
Librería: Kennys Bookshop and Art Galleries Ltd., Galway, GY, IrlandaKennys Bookshop and Art Galleries Ltd.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 278,70
Envío por EUR 10,50Se envía de Irlanda a Estados Unidos de AmericaCantidad disponible: 15 disponibles
Condición: New. A textbook and a reference source for working ceramists. It presents information on topics such as high solids loadings in slips, applying external lubricants after spray drying, optimizing dry pressing, achieving very high green density, and some logical thinking procedures for solving industrial problems. Num P…ages: 316 pages, biography. BIC Classification: TDCQ. Category: (P) Professional & Vocational. Dimension: 234 x 156 x 20. Weight in Grams: 653. . 1996. 2nd ed. 1996. Hardback. . . . .
- Tapa dura
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 312,85
Envío por EUR 3,50Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 340 2nd Edition.
- Tapa dura
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 244,86
Envío por EUR 63,38Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This volume is intended to be used as a textbook for teaching pur poses and also as a reference source for working engineers. Therefore, a wide range of subject matter must be covered, starting with funda mental explanations for students, and extending to… advanced applica tions for development workers and factory problem-solvers. Such an ambitious task is being attempted only because of the present lack of resources which might otherwise fill the need. The author planned the book for use as the primary text in an un dergraduate course in processing, which he teaches at Rutgers University. However, the book could also be used as a supplementary text for more general courses in related subjects. Powder metallurgy, printing inks, and paints involve many of the same organic additives as ceramic processing. These specialized fields of technology are usually covered somewhat by very general college courses in metallurgy, materials science, and chemical engineering, but there appears to be a need for more specific training in the area of the organic additives used in those fields. The formulators, for lack of confidence and better understanding, often rely on simple waxes or acrylates, when a higher level of technological knowledge could provide improved results. It is intended that this book will be useful as a supplementary source of information for those fields also, both as a self-teaching tool and for college coursework.
- Tapa dura
Librería: Kennys Bookstore, Olney, MD, Estados Unidos de AmericaKennys Bookstore
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 353,95
Envío por EUR 9,20Se envía dentro de Estados Unidos de AmericaCantidad disponible: 15 disponibles
Condición: New. A textbook and a reference source for working ceramists. It presents information on topics such as high solids loadings in slips, applying external lubricants after spray drying, optimizing dry pressing, achieving very high green density, and some logical thinking procedures for solving industrial problems. Num P…ages: 316 pages, biography. BIC Classification: TDCQ. Category: (P) Professional & Vocational. Dimension: 234 x 156 x 20. Weight in Grams: 653. . 1996. 2nd ed. 1996. Hardback. . . . . Books ship from the US and Ireland.
- Tapa dura
Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Como Nuevo
EUR 367,19
Envío por EUR 29,41Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.
- Tapa blanda
- Impresión bajo demanda
Librería: Brook Bookstore On Demand, Napoli, NA, ItaliaBrook Bookstore On Demand
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 110,26
Envío por EUR 5,50Se envía de Italia a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: new. Questo è un articolo print on demand.
- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 139,09
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Organic Additives and Ceramic Processing: With Applications in Powder Metallurgy, Ink, and Paint describes the major manufacturing processes, such as slip casting, tape casting, injection molding, etc. The book covers each subject,…including the ceramic processes, organic chemical structures, polymers, colloid science and others, starting from fundamental principles, with many literature references for further reading. After the fundamentals, detailed case studies from industrial applications are described for the optimization of solvents, dispersants, binders, plasticizers, lubricants and some minor additives. A wide range of information is covered, beginning with fundamental equations for students, and extending to advanced applications for development workers and factory problem solvers. Shanefield undertook this ambitious task only because of the previous lack of resources that address the growing need for detailed information on organic additives for ceramics. Suitable for use as a textbook and as a reference source for working ceramists and chemists who wish to supply the ceramics industry with additives. 328 pp. Englisch.
- Tapa blanda
- Impresión bajo demanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 118,61
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Organic Additives and Ceramic Processing: With Applications in Powder Metallurgy, Ink, and Paint describes the major manufacturing processes, such as slip casting, tape casting, injection molding, etc. The book covers… each subject, incl.
- Tapa dura
- Impresión bajo demanda
Librería: Basi6 International, Irving, TX, Estados Unidos de AmericaBasi6 International
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 178,31
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 10 disponibles
Condición: Brand New. New. US edition. Print on demand title. Delivery takes 20-25 days.
- Tapa blanda
- Impresión bajo demanda
Librería: THE SAINT BOOKSTORE, Southport, Reino UnidoTHE SAINT BOOKSTORE
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 168,58
Envío por EUR 18,40Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Paperback / softback. Condición: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days.
- Tapa blanda
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 139,09
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Organic Additives and Ceramic Processing: With Applications in Powder Metallurgy, Ink, and Paint describes the major manufacturing processes, such as slip casting, tape casting, injection molding, etc. The book covers each subject, incl…uding the ceramic processes, organic chemical structures, polymers, colloid science and others, starting from fundamental principles, with many literature references for further reading. After the fundamentals, detailed case studies from industrial applications are described for the optimization of solvents, dispersants, binders, plasticizers, lubricants and some minor additives. A wide range of information is covered, beginning with fundamental equations for students, and extending to advanced applications for development workers and factory problem solvers. Shanefield undertook this ambitious task only because of the previous lack of resources that address the growing need for detailed information on organic additives for ceramics.Suitable for use as a textbook and as a reference source for working ceramists and chemists who wish to supply the ceramics industry with additives.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 328 pp. Englisch.
- Tapa blanda
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 199,61
Envío por EUR 7,65Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand pp. 328 49:B&W 6.14 x 9.21 in or 234 x 156 mm (Royal 8vo) Perfect Bound on White w/Gloss Lam.
- Tapa blanda
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 199,63
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND pp. 328.
- Tapa dura
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 235,39
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Buch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This volume is intended to be used as a textbook for teaching pur poses and also as a reference source for working engineers. Therefore, a wide range of subject matter must be covered, starting with funda mental explanations for students,…and extending to advanced applica tions for development workers and factory problem-solvers. Such an ambitious task is being attempted only because of the present lack of resources which might otherwise fill the need. The author planned the book for use as the primary text in an un dergraduate course in processing, which he teaches at Rutgers University. However, the book could also be used as a supplementary text for more general courses in related subjects. Powder metallurgy, printing inks, and paints involve many of the same organic additives as ceramic processing. These specialized fields of technology are usually covered somewhat by very general college courses in metallurgy, materials science, and chemical engineering, but there appears to be a need for more specific training in the area of the organic additives used in those fields. The formulators, for lack of confidence and better understanding, often rely on simple waxes or acrylates, when a higher level of technological knowledge could provide improved results. It is intended that this book will be useful as a supplementary source of information for those fields also, both as a self-teaching tool and for college coursework. 340 pp. Englisch.
Más imágenes- Tapa dura
- Impresión bajo demanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 204,85
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Buch. Condición: Neu. Organic Additives and Ceramic Processing, Second Edition | With Applications in Powder Metallurgy, Ink, and Paint | Daniel J. Shanefield | Buch | xiv | Englisch | 1996 | Springer US | EAN 9780792397656 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[do…t]hartmann[at]springer[dot]com | Anbieter: preigu Print on Demand.
- Tapa dura
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 235,39
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This volume is intended to be used as a textbook for teaching pur poses and also as a reference source for working engineers. Therefore, a wide range of subject matter must be covered, starting with funda mental explanations for students, and…extending to advanced applica tions for development workers and factory problem-solvers. Such an ambitious task is being attempted only because of the present lack of resources which might otherwise fill the need. The author planned the book for use as the primary text in an un dergraduate course in processing, which he teaches at Rutgers University. However, the book could also be used as a supplementary text for more general courses in related subjects. Powder metallurgy, printing inks, and paints involve many of the same organic additives as ceramic processing. These specialized fields of technology are usually covered somewhat by very general college courses in metallurgy, materials science, and chemical engineering, but there appears to be a need for more specific training in the area of the organic additives used in those fields. The formulators, for lack of confidence and better understanding, often rely on simple waxes or acrylates, when a higher level of technological knowledge could provide improved results. It is intended that this book will be useful as a supplementary source of information for those fields also, both as a self-teaching tool and for college coursework.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 340 pp. Englisch.
- Tapa dura
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 334,84
Envío por EUR 7,65Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand pp. 340 52:B&W 6.14 x 9.21in or 234 x 156mm (Royal 8vo) Case Laminate on White w/Gloss Lam.
- Tapa dura
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 333,50
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND pp. 340.
