Learning applying solidworks de hansen scott (23 resultados)

- Tapa blanda
Librería: Hay-on-Wye Booksellers, Hay-on-Wye, HEREF, Reino UnidoHay-on-Wye Booksellers
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Bueno
EUR 10,76
Envío por EUR 30,03Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponible
Condición: Very Good. New/unused condition with small scuffs and scratches to the cover. The content is in new condition.

Learning and Applying Solidworks 2010-2011: Step-by-step [Paperback] [Aug 03, 2010] Hansen, L. Scott
- Tapa blanda
Librería: Hay-on-Wye Booksellers, Hay-on-Wye, HEREF, Reino UnidoHay-on-Wye Booksellers
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Bueno
EUR 12,59
Envío por EUR 30,03Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponible
Condición: Very Good. Some mild shelfwear on the cover otherwise very good.

- Tapa blanda
Librería: ThriftBooks-Dallas, Dallas, TX, Estados Unidos de AmericaThriftBooks-Dallas
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 57,13
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponible
Paperback. Condición: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 74,41
Envío por EUR 2,40Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: As New. Unread book in perfect condition.

- Tapa blanda
Librería: PBShop.store UK, Fairford, GLOS, Reino UnidoPBShop.store UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 68,06
Envío por EUR 9,17Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 15 disponibles
PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.

- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 76,22
Envío por EUR 2,40Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.

- Tapa blanda
Librería: California Books, Miami, FL, Estados Unidos de AmericaCalifornia Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 75,89
Envío por EUR 2,73Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.

- Tapa blanda
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 76,44
Envío por EUR 18,02Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.

- Tapa blanda
Librería: Grand Eagle Retail, Bensenville, IL, Estados Unidos de AmericaGrand Eagle Retail
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 97,94
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponible
Paperback. Condición: new. Paperback. This unique reference is intended to help users learn SolidWorks on their own with little or no outside help. Unlike other books of its kind, it begins at a very basic level and ends at a fairly advanced level. It has been updated to include all new features of SolidWorks 2013 - 2014. And it's perfect for anyone enrolled in Engineering and Technology programs, as well as professionals interested in learning SolidWorks. It provides step-by-step instructions along with numerous illustrations. Commands are shown in bold for those who would rather not read every word of instruction. It includes graphic illustration for each step for those who would rather learn visually. It contains small notes on most illustrations to further clarify instructions. Most chapters are self contained, allowing users to start from most anywhere in the book. This unique reference is intended to help users learn SolidWorks on their own with little or no outside help. Unlike other books of its kind, it begins at a very basic level and ends at a fairly advanced level. It has been updated to include all new features of SolidWorks 2013-2014. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

- Tapa blanda
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 84,06
Envío por EUR 18,02Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: As New. Unread book in perfect condition.

- Tapa blanda
Librería: THE SAINT BOOKSTORE, Southport, Reino UnidoTHE SAINT BOOKSTORE
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 76,46
Envío por EUR 26,56Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Paperback / softback. Condición: New. New copy - Usually dispatched within 4 working days.

- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 90,17
Envío por EUR 22,02Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In English.

- Tapa blanda
Librería: Rarewaves.com USA, London, LONDO, Reino UnidoRarewaves.com USA
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 116,59
Gastos de envío gratisSe envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Paperback. Condición: New. 2013-2014 Edition. This unique reference is intended to help users learn SolidWorks on their own with little or no outside help. Unlike other books of its kind, it begins at a very basic level and ends at a fairly advanced level. It has been updated to include all new features of SolidWorks 2013 - 2014. And it's perfect for anyone enrolled in Engineering and Technology programs, as well as professionals interested in learning SolidWorks. It provides step-by-step instructions along with numerous illustrations. Commands are shown in bold for those who would rather not read every word of instruction. It includes graphic illustration for each step for those who would rather learn visually. It contains small notes on most illustrations to further clarify instructions. Most chapters are self contained, allowing users to start from most anywhere in the book.…

- Tapa blanda
Librería: Rarewaves USA, HEBRON, KY, Estados Unidos de AmericaRarewaves USA
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 117,49
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Paperback. Condición: New. 2013-2014 Edition. This unique reference is intended to help users learn SolidWorks on their own with little or no outside help. Unlike other books of its kind, it begins at a very basic level and ends at a fairly advanced level. It has been updated to include all new features of SolidWorks 2013 - 2014. And it's perfect for anyone enrolled in Engineering and Technology programs, as well as professionals interested in learning SolidWorks. It provides step-by-step instructions along with numerous illustrations. Commands are shown in bold for those who would rather not read every word of instruction. It includes graphic illustration for each step for those who would rather learn visually. It contains small notes on most illustrations to further clarify instructions. Most chapters are self contained, allowing users to start from most anywhere in the book.…

- Tapa blanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 75,30
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Über den Autor Introduction to Mastercam X5 Creating 2D Geometry Additional Tools for CAD Generating Hole Operations in 2D Space Profiling and Pocketing in 2D Space Editing Machining Operations Via the Operations Manager Using T.

- Tapa blanda
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 110,13
Envío por EUR 18,02Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: Brand New. 450 pages. 10.80x8.50x1.30 inches. In Stock.

- Tapa blanda
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 111,07
Envío por EUR 18,02Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponible
Paperback. Condición: Brand New. 450 pages. 11.25x8.50x0.75 inches. In Stock.

- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 102,87
Envío por EUR 44,05Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. Neuware - This text presents a thorough introduction to SolidWorks for anyone with little or no prior experience with this software. It can be used in virtually any educational setting from 4-year engineering schools to vo/tech colleges and industrial training centers and will also serve as a reliable reference for on-the-job use. Unlike other books of its kind, it begins at a very basic level and ends with coverage of advanced topics. It's a perfect choice for anyone interested in learning SolidWorks quickly and effectively. Features- New to this edition: Chapter 16 on the FloXpress Analysis Wizard; Chapter 17, Introduction to Equations; Additional Practice Problems.- Easy-to-follow step-by-step instructions complemented by numerous illustrations.- Commands are highlighted in bold for more efficient reading and review.- Includes hundreds of graphic illustrations that enhance visual learning.- Most chapters are self-contained, providing added flexibility in using this book.…

- Tapa blanda
Librería: Rarewaves.com UK, London, Reino UnidoRarewaves.com UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 83,74
Envío por EUR 78,08Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Paperback. Condición: New. Overview This text presents a thorough introduction to SolidWorks for anyone with little or no prior experience with this software. It can be used in virtually any educational setting - from 4-year engineering schools to vo/tech colleges and industrial training centers - and will also serve as a reliable reference for on-the-job use. Unlike other books of its kind, it begins at a very basic level and ends with coverage of advanced topics. It's a perfect choice for anyone interested in learning SolidWorks quickly and effectively. New to this edition: Chapter 16 on the FloXpress Analysis Wizard; Chapter 17, Introduction to Equations; Additional Practice Problems.Easy-to-follow step-by-step instructions complemented by numerous illustrations.Commands are highlighted in bold for more efficient reading and review.Includes hundreds of graphic illustrations that enhance visual learning.Most chapters are self-contained, providing added flexibility in using this book.Getting StartedCreate a simple sketch using the Sketch commandsDimension a sketch using the Smart Dimension commandExtrude a sketch using the Features commands. Create a fillet using the Fillet commandCreate a hole using the Extruded Cut commandCreate a counter bore using the Hole Wizard commandLearning More BasicsRevolve a sketch using the Revolve Boss/Base commandCreate a hole using the Extruded Cut commandCreate a series of holes using the Circular Pattern commandLearning to Detail Part DrawingsCreate an Orthographic View using the Drawing commandsAdvanced Detail Drawing ProceduresCreate an Auxiliary View using the Drawing commandsCreate a Section View using the Drawing commandsDimension views using the Drawing commandsCreate Text using the Drawing Annotation commandsLearning to Edit Existing Solid ModelsEdit the part using the Edit Sketch commandEdit the part using the Edit Feature commandAdvanced Design ProceduresLearn to use the Front, Top, and Right PlanesLearn to use the Wireframe viewing commandLearn to Convert Entities on to a new sketchLearn to use the Shell commandIntroduction to Assembly View ProceduresLearn to insert existing solid models into the Assembly commandsLearn to constrain all parts using the Mate commandLearn to edit/modify parts while in the Assembly commandLearn to simulate motion using the Motion Study commandIntroduction to Advanced CommandsLearn to use the Swept Boss/Base Command. Learn to use the Plane commandLearn to use the Lofted Boss/Base commandIntroduction to SimulationXpressLearn to run an analysis on a partLearn to interpret an analysis on a partIntroduction to Mechanical MatesLearn to use the Cam mechanical mateAdvanced Work Plane ProceduresLearn to create points on a solid modelLearn to create an offset work planeLearn to create an offset Extruded cutIntroduction to Creating a HelixLearn how to create a HelixIntroduction to Importing .DWG filesLearn to create a simple .DWG fileLearn to import a .DWG file into a 1 view drawingLearn to import a .DWG. …

- Tapa blanda
Librería: Rarewaves USA United, HEBRON, KY, Estados Unidos de AmericaRarewaves USA United
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 120,68
Envío por EUR 45,48Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Paperback. Condición: New. 2013-2014 Edition. This unique reference is intended to help users learn SolidWorks on their own with little or no outside help. Unlike other books of its kind, it begins at a very basic level and ends at a fairly advanced level. It has been updated to include all new features of SolidWorks 2013 - 2014. And it's perfect for anyone enrolled in Engineering and Technology programs, as well as professionals interested in learning SolidWorks. It provides step-by-step instructions along with numerous illustrations. Commands are shown in bold for those who would rather not read every word of instruction. It includes graphic illustration for each step for those who would rather learn visually. It contains small notes on most illustrations to further clarify instructions. Most chapters are self contained, allowing users to start from most anywhere in the book.…

- Tapa blanda
Librería: AussieBookSeller, Truganina, VIC, AustraliaAussieBookSeller
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 143,75
Envío por EUR 33,66Se envía de Australia a Estados Unidos de AmericaCantidad disponible: 1 disponible
Paperback. Condición: new. Paperback. This unique reference is intended to help users learn SolidWorks on their own with little or no outside help. Unlike other books of its kind, it begins at a very basic level and ends at a fairly advanced level. It has been updated to include all new features of SolidWorks 2013 - 2014. And it's perfect for anyone enrolled in Engineering and Technology programs, as well as professionals interested in learning SolidWorks. It provides step-by-step instructions along with numerous illustrations. Commands are shown in bold for those who would rather not read every word of instruction. It includes graphic illustration for each step for those who would rather learn visually. It contains small notes on most illustrations to further clarify instructions. Most chapters are self contained, allowing users to start from most anywhere in the book. This unique reference is intended to help users learn SolidWorks on their own with little or no outside help. Unlike other books of its kind, it begins at a very basic level and ends at a fairly advanced level. It has been updated to include all new features of SolidWorks 2013-2014. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.…

- Tapa blanda
Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Bueno
EUR 190,53
Envío por EUR 30,03Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponible
Paperback. Condición: Very Good. Very Good. Dust Jacket may NOT BE INCLUDED.CDs may be missing. SHIPS FROM MULTIPLE LOCATIONS. book.

- Tapa blanda
Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 207,86
Envío por EUR 30,03Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponible
Paperback. Condición: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.