Iutam symposium creep structures (39 resultados)

Condición: New. In English.

Condición: New.

Condición: New. A brand new book in pristine condition. Showing zero signs of shelf wear, creases, or damage.

Condición: New. In English.

Condición: New. In English.

Paperback. Condición: Brand New. reprint edition. 631 pages. 9.25x6.10x1.40 inches. In Stock.

Paperback. Condición: Brand New. reprint edition. 444 pages. 9.25x6.10x1.00 inches. In Stock.

Condición: Gut. Zustand: Gut | Seiten: 356 | Sprache: Englisch | Produktart: Bücher | This book offers a current state of the art in analysis and modeling of creep phenomena with applications to the structural mechanics. It presents the some presentations from the IUTAM-Symposium series "Creep in Structures", which held in Magdeburg (Germany) in September 2023, and it discusses many advances and new results in the field. These are for example: interlinks of mechanics with materials science in multi-scale analysis of deformation and damage mechanisms over a wide range of stresses and temperature; development and analysis of new alloys for (ultra)high-temperature applications; formulation and calibration of advanced constitutive models of inelastic behavior under transient loading and temperature conditions; development of efficient procedures and machine learning techniques for identification of material parameters in advanced constitutive laws; introduction of gradient-enhanced and non-local theories to account for damage and fracture processes; and applicationof new experimental methods, such as digital image correlation, for the analysis of inelastic deformation under multi-axial stress state.…

Condición: New.

Condición: As New. Unread book in perfect condition.

Condición: New. In English.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - There is a tradition to organize IUTAM Symposia 'Creep in Structures' every ten years: the first Symposium was organized by N.J. Hoff in Stan ford (1960), the second one by J. Hult in Goteborg (1970), and the third one by A.R.S. Ponter in Leicester (1980). The fourth Symposium in Cracow, September 1990, gathered 123 par ticipants from 21 countries and reflected rapid development of the theory, experimental research and structural applications of creep and viscoplas ticity, including damage and rupture. Indeed, the scope of the Sympo sium was broad, maybe even too broad, but it was kept according to the tradition. Probably the chairman of 'Creep in Structures V' in the year 2000 (if organized at all) will be forced to confine the scope substantially. Participation in the Symposium was reserved for invited participants, suggested by members of the Scientific Committee. Total number of sug gestions was very large and the response - unexpectedly high. Apart from several papers rejected, as being out of scope, over 100 papers were accepted for presentation. A somewhat unconventional way of presenta tion was introduced to provide ample time for fruitful and well prepared discussions: besides general lectures (30 minutes each), all the remain ing papers were presented as short introductory lectures (10 minutes) followed by a I-hour poster discussion with the authors and then by a general discussion. Such an approach made it possible to present general ideas orally, and then to discuss all the papers through and through.…

Taschenbuch. Condición: Neu. Creep in Structures VI | IUTAM Symposium Proceedings | Holm Altenbach (u. a.) | Taschenbuch | Advanced Structured Materials | xx | Englisch | 2024 | Springer | EAN 9783031390722 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a current state of the art in analysis and modeling of creep phenomena with applications to the structural mechanics. It presents the some presentations from the IUTAM-Symposium series 'Creep in Structures', which held in Magdeburg (Germany) in September 2023, and it discusses many advances and new results in the field. These are for example: interlinks of mechanics with materials science in multi-scale analysis of deformation and damage mechanisms over a wide range of stresses and temperature; development and analysis of new alloys for (ultra)high-temperature applications; formulation and calibration of advanced constitutive models of inelastic behavior under transient loading and temperature conditions; development of efficient procedures and machine learning techniques for identification of material parameters in advanced constitutive laws; introduction of gradient-enhanced and non-local theories to account for damage and fracture processes; and applicationof new experimental methods, such as digital image correlation, for the analysis of inelastic deformation under multi-axial stress state.…

Paperback. Condición: Brand New. reprint edition. 732 pages. 9.25x6.10x1.66 inches. In Stock.

Condición: gut. Creep in Structures. 4th IUTAM Symposium, Cracow, Poland, September 10-14, 1990. International Union of Theoretical and Applied Mechanics. In deutscher Sprache. pages.

Condición: New.

Hardcover. Condición: Brand New. 354 pages. 9.25x6.10x0.91 inches. In Stock.

Condición: New.

Taschenbuch. Condición: Neu. IUTAM Symposium on Creep in Structures | N. Ohno (u. a.) | Taschenbuch | xxii | Englisch | 2010 | Springer Netherland | EAN 9789048156238 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

Condición: Sehr gut. Zustand: Sehr gut | Seiten: 732 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.

Condición: New. In English.

Condición: As New. Unread book in perfect condition.

Condición: New. Held in Nagoya, Japan, 3-7 April 2000 Editor(s): Murakami, S.; Ohno, N. Series: Solid Mechanics and its Applications. Num Pages: 544 pages, biography. BIC Classification: TGMD5. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 233 x 155 x 30. Weight in Grams: 1076. . 2000. 120. Hardback. . . . . …

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - The advent of steam turbines and the sudden rise of steam temperature at the beginning of the 20th century gave a great impetus to the start of scientific research on metal creep and high-temperature strength. Then aeronautical and aerospace exploitation in the 1940's and 1950's enlarged the scope of creep research. In this context, the first IUTAM Symposium on 'Creep in Structures' was held at Stanford University in July 1960, and about 60 participants from seven countries around the world discussed their recent results on this problem. Subsequent innovation in science and technology, as in nuclear and new energy technology, new materials, large scale integration of semiconductors etc., has claimed solutions to new and challenging problems in this fundamental field of applied mechanics. In order to discuss the new topics in this discipline, the IUTAM Symposia 'Creep in Structures' thereafter have been held every ten years; i.e. the second in 1970 at Gothenburg, Sweden, the third in 1980 at Leicester, U.K. and the fourth in 1990 at Cracow,Poland. The First (1960) and Second Symposium (1970) were concerned mainly with the phenomenological law of creep and creep analysis of structural elements, whereas the issues of the Third Symposium (1980) shifted toward the problems of creep damage, creep crack growth, practical and effective design methods, etc.…

Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - The advent of steam turbines and the sudden rise of steam temperature at the beginning of the 20th century gave a great impetus to the start of scientific research on metal creep and high-temperature strength. Then aeronautical and aerospace exploitation in the 1940's and 1950's enlarged the scope of creep research. In this context, the first IUTAM Symposium on 'Creep in Structures' was held at Stanford University in July 1960, and about 60 participants from seven countries around the world discussed their recent results on this problem. Subsequent innovation in science and technology, as in nuclear and new energy technology, new materials, large scale integration of semiconductors etc., has claimed solutions to new and challenging problems in this fundamental field of applied mechanics. In order to discuss the new topics in this discipline, the IUTAM Symposia 'Creep in Structures' thereafter have been held every ten years; i.e. the second in 1970 at Gothenburg, Sweden, the third in 1980 at Leicester, U.K. and the fourth in 1990 at Cracow,Poland. The First (1960) and Second Symposium (1970) were concerned mainly with the phenomenological law of creep and creep analysis of structural elements, whereas the issues of the Third Symposium (1980) shifted toward the problems of creep damage, creep crack growth, practical and effective design methods, etc.…

Hardcover. Condición: Brand New. 1st edition. 520 pages. 10.00x6.75x1.00 inches. In Stock.

Condición: New. Held in Nagoya, Japan, 3-7 April 2000 Editor(s): Murakami, S.; Ohno, N. Series: Solid Mechanics and its Applications. Num Pages: 544 pages, biography. BIC Classification: TGMD5. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 233 x 155 x 30. Weight in Grams: 1076. . 2000. 120. Hardback. . . . . Books ship from the US and Ireland. …

Gr.-8°. XXIV, 707 S. m. einigen Fig., OPpbd., ausgeschiedenes Bibliotheksexpl. mit den üblichen Kennzeichnungen, sehr guter Zustand. ISBN 3540537864.

Springer-Verlag, Berlin 1991. xxiv, 708 pp. Hardcover. Fine condition. (IUTAM symposia).