Integrated biomaterials tissue engineering (32 resultados)

Condición: Like New. Page block firm and clean, binding unblemished, boards straight, no markings of any kind. Fine, like new condition. Well packaged and promptly shipped from California. Partnered with Friends of the Library since 2010.

hardcover. Condición: Used; Good. Dispatched, from the UK, within 48 hours of ordering. This book is in good condition but will show signs of previous ownership. Please expect some creasing to the spine and/or minor damage to the cover. Damaged cover. The cover of is slightly damaged for instance a torn or bent corner.…

Condición: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,650grams, ISBN:9780412412608. …

Condición: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,650grams, ISBN:9780412412608. …

Hardcover. Condición: Very Good. No Dust Jacket. Hardcover. No jacket. Superficial marks on boards. Very light wear on spine ends and leading corners. Binding is intact, contents are clean and clear. AM. Used.

Condición: New.

Condición: New.

Condición: Gut. Zustand: Gut | Seiten: 312 | Sprache: Englisch | Produktart: Bücher | are then selected and must meet the general 'biocompatibility' require­ ments. Prototypes are built and tested to include biocompatibility evalua­ tions based on ASTM standard procedures. The device is validated for sterility and freedom from pyrogens before it can be tested on animals or humans. Medical devices are classified as class I, II or III depending on their invasiveness. Class I devices can be marketed by submitting notification to the FDA. Class II and III devices require either that they show equivalence to a device marketed prior to 1976 or that they receive pre-marketing approval. The time from device conception to FDA approval can range from months (class I device) to in excess of ten years (class III device). Therefore, much planning is necessary to pick the best regulatory approach. 2. Wound Dressings and Skin Replacement 2.1 Introduction Wounds to the skin are encountered every day. Minor skin wounds cause some pain, but these wounds will heal by themselves in time. Even though many minor wounds heal effectively without scarring in the absence of treatment, they heal more rapidly if they are kept clean and moist. Devices such as Band-Aids are used to assist in wound healing. For deeper wounds, a variety of wound dressings have been developed including cell cultured artificial skin. These materials are intended to promote healing of skin damaged or removed as a result of skin grafting, ulceration, burns, cancer excision or mechanical trauma.…

Condición: New. This book acts as a self-contained resource for understanding the current technological advancement of biomaterials towards tissue engineering applications. Editor(s): Ramalingam, Murugan; Haidar, Ziyad; Ramakrishna, Seeram; Kobayashi, Hisatoshi; Haikel, Youssef. Series: Biomedical Science, Engineering, and Technology. Num Pages: 328 pages, Illustrations. BIC Classification: TCB; TGM. Category: (P) Professional & Vocational. Dimension: 240 x 156 x 22. Weight in Grams: 586. . 2012. 1st Edition. Hardcover. . . . .…

Condición: New. Brand new! Please provide a physical shipping address.

Condición: New.

Gebunden. Condición: New.

Condición: New.

Condición: New. In English.

Condición: New. In English.

Condición: As New. Unread book in perfect condition.

Hardcover. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: As New. Unread book in perfect condition.

Taschenbuch. Condición: Neu. Biomaterials, Medical Devices and Tissue Engineering: An Integrated Approach | An integrated approach | F. H. Silver | Taschenbuch | vii | Englisch | 2012 | Springer Netherland | EAN 9789401043168 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

Gebunden. Condición: New. This book acts as a self-contained resource for understanding the current technological advancement of biomaterials towards tissue engineering applications. It covers impact of biomaterials at different length scales such as macro/micro/nano/ level and offe.

Condición: New. This book acts as a self-contained resource for understanding the current technological advancement of biomaterials towards tissue engineering applications. Editor(s): Ramalingam, Murugan; Haidar, Ziyad; Ramakrishna, Seeram; Kobayashi, Hisatoshi; Haikel, Youssef. Series: Biomedical Science, Engineering, and Technology. Num Pages: 328 pages, Illustrations. BIC Classification: TCB; TGM. Category: (P) Professional & Vocational. Dimension: 240 x 156 x 22. Weight in Grams: 586. . 2012. 1st Edition. Hardcover. . . . . Books ship from the US and Ireland.…

Paperback. Condición: Brand New. reprint edition. 303 pages. 9.25x6.25x0.75 inches. In Stock.

Hardcover. Condición: Brand New. 303 pages. 9.75x6.50x0.75 inches. In Stock.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - are then selected and must meet the general 'biocompatibility' require ments. Prototypes are built and tested to include biocompatibility evalua tions based on ASTM standard procedures. The device is validated for sterility and freedom from pyrogens before it can be tested on animals or humans. Medical devices are classified as class I, II or III depending on their invasiveness. Class I devices can be marketed by submitting notification to the FDA. Class II and III devices require either that they show equivalence to a device marketed prior to 1976 or that they receive pre-marketing approval. The time from device conception to FDA approval can range from months (class I device) to in excess of ten years (class III device). Therefore, much planning is necessary to pick the best regulatory approach. 2. Wound Dressings and Skin Replacement 2.1 Introduction Wounds to the skin are encountered every day. Minor skin wounds cause some pain, but these wounds will heal by themselves in time. Even though many minor wounds heal effectively without scarring in the absence of treatment, they heal more rapidly if they are kept clean and moist. Devices such as Band-Aids are used to assist in wound healing. For deeper wounds, a variety of wound dressings have been developed including cell cultured artificial skin. These materials are intended to promote healing of skin damaged or removed as a result of skin grafting, ulceration, burns, cancer excision or mechanical trauma.…

Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - are then selected and must meet the general 'biocompatibility' require ments. Prototypes are built and tested to include biocompatibility evalua tions based on ASTM standard procedures. The device is validated for sterility and freedom from pyrogens before it can be tested on animals or humans. Medical devices are classified as class I, II or III depending on their invasiveness. Class I devices can be marketed by submitting notification to the FDA. Class II and III devices require either that they show equivalence to a device marketed prior to 1976 or that they receive pre-marketing approval. The time from device conception to FDA approval can range from months (class I device) to in excess of ten years (class III device). Therefore, much planning is necessary to pick the best regulatory approach. 2. Wound Dressings and Skin Replacement 2.1 Introduction Wounds to the skin are encountered every day. Minor skin wounds cause some pain, but these wounds will heal by themselves in time. Even though many minor wounds heal effectively without scarring in the absence of treatment, they heal more rapidly if they are kept clean and moist. Devices such as Band-Aids are used to assist in wound healing. For deeper wounds, a variety of wound dressings have been developed including cell cultured artificial skin. These materials are intended to promote healing of skin damaged or removed as a result of skin grafting, ulceration, burns, cancer excision or mechanical trauma.…

Paperback. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: new. Questo è un articolo print on demand.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -are then selected and must meet the general 'biocompatibility' require ments. Prototypes are built and tested to include biocompatibility evalua tions based on ASTM standard procedures. The device is validated for sterility and freedom from pyrogens before it can be tested on animals or humans. Medical devices are classified as class I, II or III depending on their invasiveness. Class I devices can be marketed by submitting notification to the FDA. Class II and III devices require either that they show equivalence to a device marketed prior to 1976 or that they receive pre-marketing approval. The time from device conception to FDA approval can range from months (class I device) to in excess of ten years (class III device). Therefore, much planning is necessary to pick the best regulatory approach. 2. Wound Dressings and Skin Replacement 2.1 Introduction Wounds to the skin are encountered every day. Minor skin wounds cause some pain, but these wounds will heal by themselves in time. Even though many minor wounds heal effectively without scarring in the absence of treatment, they heal more rapidly if they are kept clean and moist. Devices such as Band-Aids are used to assist in wound healing. For deeper wounds, a variety of wound dressings have been developed including cell cultured artificial skin. These materials are intended to promote healing of skin damaged or removed as a result of skin grafting, ulceration, burns, cancer excision or mechanical trauma. 312 pp. Englisch.…

Buch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -are then selected and must meet the general 'biocompatibility' require ments. Prototypes are built and tested to include biocompatibility evalua tions based on ASTM standard procedures. The device is validated for sterility and freedom from pyrogens before it can be tested on animals or humans. Medical devices are classified as class I, II or III depending on their invasiveness. Class I devices can be marketed by submitting notification to the FDA. Class II and III devices require either that they show equivalence to a device marketed prior to 1976 or that they receive pre-marketing approval. The time from device conception to FDA approval can range from months (class I device) to in excess of ten years (class III device). Therefore, much planning is necessary to pick the best regulatory approach. 2. Wound Dressings and Skin Replacement 2.1 Introduction Wounds to the skin are encountered every day. Minor skin wounds cause some pain, but these wounds will heal by themselves in time. Even though many minor wounds heal effectively without scarring in the absence of treatment, they heal more rapidly if they are kept clean and moist. Devices such as Band-Aids are used to assist in wound healing. For deeper wounds, a variety of wound dressings have been developed including cell cultured artificial skin. These materials are intended to promote healing of skin damaged or removed as a result of skin grafting, ulceration, burns, cancer excision or mechanical trauma. 312 pp. Englisch.…

Buch. Condición: Neu. Biomaterials, Medical Devices and Tissue Engineering: An Integrated Approach | An integrated approach | F. H. Silver | Buch | vii | Englisch | 1993 | Springer Netherland | EAN 9780412412608 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu Print on Demand.…