Advanced manufacturing processes selected (46 resultados)
Idioma: Inglés
Editorial: Cham, Springer. 2020
Serie: Lecture Notes in Mechanical Engineering, Libro 118 de 268. Libro 118 de 268 - Lecture Notes in Mechanical Engineering
- Tapa blanda
Librería: Universitätsbuchhandlung Herta Hold GmbH, Berlin, , AlemaniaUniversitätsbuchhandlung Herta Hold GmbH
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado
EUR 20,00
Envío por EUR 30,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
XIX, 629 p. Softcover. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Lecture Notes in Mechanical Engineering. Sprache: Englisch.
- Tapa blanda
Librería: Buchpark, Trebbin, , AlemaniaBuchpark
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado
EUR 85,82
Envío por EUR 105,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: Hervorragend. Zustand: Hervorragend | Seiten: 616 | Sprache: Englisch | Produktart: Bücher | This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as… grinding, boring, milling, broaching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenkös International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6¿9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
Idioma: Inglés
Editorial: Springer 2020
Serie: Lecture Notes in Mechanical Engineering, Libro 118 de 268. Libro 118 de 268 - Lecture Notes in Mechanical Engineering
- Tapa blanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 209,13
Envío por EUR 3,48Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 590.
Más imágenesIdioma: Inglés
Editorial: Springer 2020
Serie: Lecture Notes in Mechanical Engineering, Libro 118 de 268. Libro 118 de 268 - Lecture Notes in Mechanical Engineering
- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 140,00
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Advanced Manufacturing Processes | Selected Papers from the Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2019), September 10-13, 2019, Odessa, Ukraine | Volodymyr Tonkonogyi (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xix | Englisch | 2…020 | Springer | EAN 9783030407230 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Idioma: Inglés
Editorial: Springer International Publishing 2020
Serie: Lecture Notes in Mechanical Engineering, Libro 118 de 268. Libro 118 de 268 - Lecture Notes in Mechanical Engineering
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 160,49
Envío por EUR 64,86Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely yet comprehensive snapshot of innovative research and developments in the area of manufacturing. It covers a wide range of manufacturing processes, such as cutting, coatings, and grinding, highlighting the advantages provi…ded by the use of new materials and composites, as well as new methods and technologies. It discusses topics in energy generation and pollution prevention. It shows how computational methods and mathematical models have been applied to solve a number of issues in both theoretical and applied research. Based on selected papers presented at the Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2019), held in Odessa, Ukraine on September 10-13, 2019, this book offers a timely overview and extensive information on trends and technologies in the area of manufacturing, mechanical and materials engineering. It is also intended to facilitate communication and collaboration between different groups working on similar topics, and to offer a bridge between academic and industrial researchers.
- Tapa dura
Librería: Books From California, Simi Valley, CA, Estados Unidos de AmericaBooks From California
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Aceptable
EUR 232,18
Envío por EUR 4,35Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
hardcover. Condición: Good. cover warped minor wear and creasing.
Idioma: Inglés
Editorial: Springer 2021
Serie: Lecture Notes in Mechanical Engineering, Libro 185 de 268. Libro 185 de 268 - Lecture Notes in Mechanical Engineering
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 224,35
Envío por EUR 13,80Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa dura
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 224,35
Envío por EUR 13,80Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 224,35
Envío por EUR 13,80Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
Idioma: Inglés
Editorial: Springer 2020
Serie: Lecture Notes in Mechanical Engineering, Libro 118 de 268. Libro 118 de 268 - Lecture Notes in Mechanical Engineering
- Tapa blanda
Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 226,68
Envío por EUR 28,81Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: New. New. book.
Más imágenes- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 184,85
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Advanced Manufacturing Processes IV | Selected Papers from the 4th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2022), September 6-9, 2022, Odessa, Ukraine | Volodymyr Tonkonogyi (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xviii | Engli…sch | 2023 | Springer | EAN 9783031166532 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Tapa blanda
Librería: California Books, Miami, FL, Estados Unidos de AmericaCalifornia Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 265,09
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.
Idioma: Inglés
Editorial: Springer 2021
Serie: Lecture Notes in Mechanical Engineering, Libro 185 de 268. Libro 185 de 268 - Lecture Notes in Mechanical Engineering
- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 184,85
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Advanced Manufacturing Processes II | Selected Papers from the 2nd Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2020), September 8-11, 2020, Odessa, Ukraine | Volodymyr Tonkonogyi (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xxiii | Engl…isch | 2021 | Springer | EAN 9783030680138 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Tapa dura
Librería: Buchpark, Trebbin, , AlemaniaBuchpark
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado
EUR 153,56
Envío por EUR 105,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Condición: Hervorragend. Zustand: Hervorragend | Seiten: 604 | Sprache: Englisch | Produktart: Bücher | This book offers a timely snapshot of innovative research and developments at the interface between design, manufacturing, materials, mechanical and process engineering, and quality assurance. It covers various manufacturing p…rocesses, such as grinding, milling, broaching, and gear machining, including additive manufacturing, vibrational-centrifugal strengthening, laser-ultrasonic surface hardening, and antifriction coatings. It focuses on computer and numerical simulation, mathematical and integrated process modeling, parametric synthesis, virtual prototyping, automatic control, design of manufacturing, mechanical and mechatronics systems. It describes innovative cutting and abrasive processes and combined technologies. It also covers the formation, strengthening, and thermomechanical rolling. It also investigates the temperature field behavior, thermal stability, wear resistance, and other processes of various materials. Gathering the best papers presented at the 5th GrabchenkösInternational Conference on Advanced Manufacturing Processes (InterPartner-2023), held on September 5¿8, 2023, in Odessa, Ukraine, this book provides a comprehensive and up-to-date examination of design, manufacturing, mechanical, materials, and process engineering, as well as quality assurance trends and technologies. Yet, it also aims at fostering international and interdisciplinary communication and collaborations, offering a bridge between the academic and industrial sector.
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 213,99
Envío por EUR 64,60Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as grinding, boring, mil…ling, broaching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6-9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
- Tapa dura
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 213,99
Envío por EUR 65,40Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as grinding, boring, milling, b…roaching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6-9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
Idioma: Inglés
Editorial: Springer International Publishing 2021
Serie: Lecture Notes in Mechanical Engineering, Libro 185 de 268. Libro 185 de 268 - Lecture Notes in Mechanical Engineering
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 213,99
Envío por EUR 66,53Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely yet comprehensive snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, suc…h as cutting, grinding, assembly, and coatings, including ultrasonic treatment, molding, radial-isostatic compression, ionic-plasma deposition, volumetric vibration treatment, and wear resistance. It also highlights the advantages of augmented reality, RFID technology, reverse engineering, optimization, heat and mass transfer, energy management, quality inspection, and environmental impact. Based on selected papers presented at the Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2020), held in Odessa, Ukraine, on September 8-11, 2020, this book offers a timely overview and extensive information on trends and technologies in production planning, design engineering, advanced materials, machining processes, process engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and offer a bridge between academic and industrial researchers.
- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 211,75
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Advanced Manufacturing Processes VII | Selected Papers from the 7th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2025), September 23-26, 2025, Kielce, Poland | Volodymyr Tonkonogyi (u. a.) | Taschenbuch | xvii | Englisch | 2026 | Springer | EAN 9783032149251… | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Tapa blanda
Librería: Revaluation Books, Exeter, , Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 307,83
Envío por EUR 14,40Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: Brand New. 615 pages. 9.25x6.10x1.24 inches. In Stock.
- Tapa dura
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 309,42
Envío por EUR 13,80Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 246,09
Envío por EUR 65,62Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between engineering design, manufacturing and quality assurance. It covers various manufacturing processes, such as grinding, turning, drilling, milling. It… highlights advances in additive manufacturing, surface hardening, and plasma electrolytic oxidation, as well as topics in diagnostics, maintenance, and assembly. It also focuses on optimization methods, mathematical modeling, and computer and numerical simulation for mechanical systems and manufacturing processes. In turn, chapters investigate the thermal parameters, mechanism of transition zone formation, corrosion resistance, and coating porosity of materials and alloys. Gathering the best papers presented at the 7th Grabchenko s International Conference on Advanced Manufacturing Processes (InterPartner-2025), held in Kielce, Poland, on September 23 26, 2025, this book provides a comprehensive report on trends in engineering design, manufacturing and materials engineering, covering quality assurance topics and smart technologies, alike. It also aims to foster international and interdisciplinary communication and cooperation, offering a bridge between the academic and industrial sectors.
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 309,42
Envío por EUR 13,80Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa dura
Librería: Revaluation Books, Exeter, , Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 309,98
Envío por EUR 17,28Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Hardcover. Condición: Brand New. 615 pages. 9.25x6.10x1.31 inches. In Stock.
Idioma: Inglés
Editorial: Springer Nature 2021
Serie: Lecture Notes in Mechanical Engineering, Libro 185 de 268. Libro 185 de 268 - Lecture Notes in Mechanical Engineering
- Tapa blanda
Librería: Revaluation Books, Exeter, , Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 312,06
Envío por EUR 17,28Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: Brand New. 880 pages. 9.25x6.10x1.74 inches. In Stock.
- Tapa blanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 333,44
Envío por EUR 3,48Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New.
Más imágenes- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 274,55
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Advanced Manufacturing Processes III | Selected Papers from the 3rd Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2021), September 7-10, 2021, Odessa, Ukraine | Volodymyr Tonkonogyi (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xx | Englis…ch | 2022 | Springer | EAN 9783030913298 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Tapa blanda
Librería: Revaluation Books, Exeter, , Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 350,74
Envío por EUR 17,28Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: Brand New. 752 pages. 6.14x1.51x9.21 inches. In Stock.
- Tapa blanda
Librería: Buchpark, Trebbin, , AlemaniaBuchpark
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Excelente
EUR 252,30
Envío por EUR 105,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: Sehr gut. Zustand: Sehr gut | Seiten: 740 | Sprache: Englisch | Produktart: Bücher | This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as… grinding, boring, milling, turning, woodworking, coatings, including additive manufacturing. It focuses on laser, ultrasonic, and combined laser¿ultrasonic hardening treatments, and dispersion hardening. It describes tribology and functional analysis of coatings, separation, purification and filtration processes, as well as ecological recirculation and electrohydraulic activation, highlighting the growing role of digital twins, optimization and lifecycle management methods, and quality inspection processes. It also covers cutting-edge heat and mass transfer technologies and energy management methods. Gathering the best papers presented at the 3rd Grabchenkös International Conference on Advanced Manufacturing Processes (InterPartner-2021), held in Odessa, Ukraine, on September 7¿10, 2021, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 301,45
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Advanced Manufacturing Processes V | Selected Papers from the 5th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2023), September 5-8, 2023, Odessa, Ukraine | Volodymyr Tonkonogyi (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xviii | Englis…ch | 2024 | Springer | EAN 9783031427800 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Tapa dura
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 370,19
Envío por EUR 13,80Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In English.
